Find the answer to your Linux question:
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 27 of 27

Thread: iso

Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #21
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578

    Locate the line I: and P: lines below that S: line. They will tell what interface class it uses and what Product ID it has.

  2. #22
    ok wen i saved the data i opned it in windows and it didnt format it like linux did and its very late over here and i have to get up early so if o just post the whole /proc/bus/usb/devices it is very bad formatted layout you will spot the ADSL bit, this is proberly a senstive file and shouldnt be displayed but i delete later if need be. sorry again for the jumble mess its in, if you really cant figure it i sort it next time just i gota go, however i just pasted here and it came out ok... oh well.... anyhoo tell me if this file shouldnt be displayed so then when imnext on here i remove this post...

    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=c800
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
    P: Vendor=1690 ProdID=0204 Rev= 1.00
    S: Manufacturer=GlobeSpan Inc.
    S: Product=USB-ADSL Modem
    S: SerialNumber=29D6A3
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=88(I) Atr=01(Isoc) MxPS=1003 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=88(I) Atr=01(Isoc) MxPS= 912 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=88(I) Atr=01(Isoc) MxPS= 736 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=88(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=88(I) Atr=01(Isoc) MxPS= 240 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
    T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
    D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=046d ProdID=c207 Rev= 1.04
    S: Manufacturer=Logitech Inc.
    S: Product=WingMan Extreme Digital 3D
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=cc00
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0483 ProdID=1307 Rev= 2.05
    S: Manufacturer=PQI
    S: Product=Travel Flash
    S: SerialNumber=4710765066451
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=d000
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms



    thanx again!

  3. #23
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    I don't think there is any usb modem support in linux yet. Atleast I haven't seen any in the stable release of the kernel. You could check out a dev kernel and see if that does.

  4. $spacer_open
    $spacer_close
  5. #24
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    Nevermind, I was wrong. I just checked and there is a usb modem module to use.

  6. #25
    usb modem module? is that like a plugin? is available yet?


    nevermind though, just wont have the net until its out....

  7. #26
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    I have it in my kernel config. I am sure your kernel has it as well. Check under /lib/modules/<your kernel>/net/. Look for something like usb-modem

  8. #27
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578
    That USB modem module is probably a USB serial to modem dongle. I thought that this might be something similar. However, the I line specifies that the interface class is "ff(vend)", ie. vendor specific. That means that you'll need a special driver for it. Your best bet is probably a google search or to email your modem OEM.
    /proc/bus/usb/devices isn't especially sensitive. All it gives is information about your USB devices, and unless you've got a classified retinal scanner or something attached to your computer via USB, you need not worry. A general rule is that anything that's world-readable is generally not sensitive (remember to check the entire path, though, not just the file itself).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •