Printable View
Hey all, I just installed linux on my main pc and would appreciate some help on the following topics:
1.) What are .run files and how can I use them
2.) I have both onboard sound and a SoundBlaster, I want to use the SoundBlaster but I don't get any sound at all :(
3.) how to access my fat32 drive?
On RedHat 8
thx2all
ur windows (fat32) drive wil be accessible by /mnt/windows or /win_c or something similar
if its not there login as root and runthis assumes ur fat32 partition is the first partition on primary master.Code:mkdir /mnt/windows
mount /dev/hda1 /mnt/windows
ur dirves are listed as
hda = pri master
hdb = pri slave
hdc = sec master
hdd = sec slave
and the 1 after it refers to the partition number.
not sure what the sound wizard is called in RH. try sound and press tab
.run files??? i assume u mean executables. msot can be run by going into the directory and typing ./programname
Some vendors like to name their installers .run; I don't know why they fancy this, but apparently they do. In any case you can run it just like any other program, but normally they are terminal programs, so you have to run them in a terminal emulator. If you downloaded the file,you also have to make it executable. From a shell, this can be done by running "chmod 755 file.run". There are GUI ways of doing it as well, but I never use it, so I can't say how to. Probably there's something if you open the properties window for a file.
What kind of soundblaster do you have? Can you start a terminal emulator, run the following commands and post here what they return, please?
Code:/sbin/lspci
/sbin/lsmod
cat /etc/modules.conf
Thank you all for your responses, you've been a helpful bunch :D
I'll be trying the commands out in a few minutes
lspci
lsmodCode:00:00.0 Host bridge: Intel Corp.: Unknown device 2578 (rev 02)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2579 (rev 02)
00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02)
00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02)
00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02)
00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02)
00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02)
00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02)
00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4144
01:00.1 Display controller: ATI Technologies Inc: Unknown device 4164
02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
02:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
02:06.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)02:07.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
modules.confCode:Module Size Used by Not tainted
vfat 13084 0
fat 38712 0 [vfat]
binfmt_misc 7524 1
sr_mod 18136 0 (autoclean)
soundcore 6532 0 (autoclean)
autofs 13348 0 (autoclean) (unused)
8139too 17704 1
mii 2156 0 [8139too]
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
ide-scsi 10512 0
scsi_mod 107176 2 [sr_mod ide-scsi]
ide-cd 33608 0
cdrom 33696 0 [sr_mod ide-cd]
ohci1394 20108 0 (unused)
ieee1394 46892 0 [ohci1394]
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5888 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
ehci-hcd 17480 0 (unused)
usbcore 77024 1 [hid usb-uhci ehci-hcd]
ext3 70368 2
jbd 52212 2 [ext3]
Code:alias parport_lowlevel parport_pc
alias eth0 8139too
alias usb-controller ehci-hcd
alias sound-slot-1 emu10k1
post-install sound-slot-1 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-1 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1
|| :
alias usb-controller1 usb-uhci
alias ieee1394-controller ohci1394
Try running the following commands and see if they give you any sound. They need to be run as root, so if you aren't already (which you shouldn't be, mind you!), run "su -" first of all to switch to root. It will prompt you for your root password.
Code:modprobe emu10k1
aumix -w50 -v50
ps aux >/dev/dsp