How to install lan driver 0f MFSYS25 for suse

I got this problem after i install suse i connect to network. my question do i need to update the driver? if yes how?

Hello and Welcome
Open a terminal window in SuSe and issue this command please, and post your results here.

Code:

---

lspci -nn

---

This will tell us what chipset it has and therefore which driver you need, if any.
Go ahead and post the output of these too.

Code:

---

lsmod

---

Code:

---

ifconfig

---

00:03.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 13)
00:06.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
Express Root Port 6 [8086:340d] (rev 13)
00:07.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 13)
00:09.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 13)
00:03.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
Express Root Port 10 [8086:3411] (rev 13)
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer
Registers Port 0 [8060:3425] (rev 13)
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8060:3426] (rev 13)
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer
Registers Port 1 [8060:3427] (rev 13)
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Routing ang Protocol Layer Registers Port 1 [8060:3428] (rev 13)


linux-hq6n:/home/ingres/desktop #lsmode
Module Size Used by
e1000e 1155108 0
nls_iso8859_1 20480 0
nls_cp437 22144 0
vfat 28800 0
fat 66720 1 vfat
xt_tcpudp 19584 1
xt_pkttype 18304 3
ipt_Log 27788 8
xt_limmit 19076 8
binfmt_misc 28040 1
cpufreq_conservative 24456 0
cpufreg_userspace 22660 0
cpufreg_powersave 18176 0
acpi_cpufreg 26380 3
speedstep_lib 21598 0
ipt_REJECT 20352 3
xt_state 18944 4
iptable_mangle 19712 0
iptablenat_nat 23688 0
nf_nat 35736 1 iptable_nat
iptable_filter 19840 1
nf_conntrack_netios_ns 19200 0
nf_conntrack_ipv4 27652 7 iptable-nat,nf_nat
nf_conntrack 79188 5 xt_state,iptable_nat,nf_conntrack_netbios
_ns,nf_conntrack_ipv4
ip_tables 30224 0
ip6_tables 31376 0
x_tables 33668 9 xt_tcpudp,xt_pkttype,ipt_LOG,xtlimit,ipt_REJECT
,xt_state,iptable_nat,ip_tables,ip6_tables

What about the result of

Code:

---

ifconfig

---

I see that the e1000 module is loading, but I don't see a card listed in the lspci output....is it a PCMCIA or USB card?

Mike sorry for the late reply... i don't have work on Saturday and Sunday.. here i am back to work...

Code:

---

linux-hq6n:/home/ingres/Desktop # lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3406] (rev 13)

00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)

00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)

00:06.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 6 [8086:340d] (rev 13)

00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)

00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13)

00:0a.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13)

00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 [8086:3425] (rev 13)

00:10.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13)

00:11.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 1 [8086:3427] (rev 13)

00:11.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 1 [8086:3428] (rev 13)

00:13.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 13)

00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13)

00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)

00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)

00:14.3 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers [8086:3438] (rev 13)

00:15.0 PIC [0800]: Intel Corporation Trusted Execution Technology Registers [8086:342f] (rev 13)

00:16.0 System peripheral [0880]: Intel Corporation DMA Engine [8086:3430] (rev 13)

00:16.1 System peripheral [0880]: Intel Corporation DMA Engine [8086:3431] (rev 13)

00:16.2 System peripheral [0880]: Intel Corporation DMA Engine [8086:3432] (rev 13)

00:16.3 System peripheral [0880]: Intel Corporation DMA Engine [8086:3433] (rev 13)

00:16.4 System peripheral [0880]: Intel Corporation DMA Engine [8086:3429] (rev 13)

00:16.5 System peripheral [0880]: Intel Corporation DMA Engine [8086:342a] (rev 13)

00:16.6 System peripheral [0880]: Intel Corporation DMA Engine [8086:342b] (rev 13)

00:16.7 System peripheral [0880]: Intel Corporation DMA Engine [8086:342c] (rev 13)

00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a37]

00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a38]

00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a39]

00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a3c]

00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1 [8086:3a40]

00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5 [8086:3a48]

00:1c.5 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 6 [8086:3a4a]

00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a34]

00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a35]

00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a36]

00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a3a]

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)

00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller [8086:3a16]

00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a30]

1:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)

01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)

04:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 08)

08:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)

---

Code:

---

linux-hq6n:/home/ingres/Desktop # lsmod
Module 


Size  Used by

xt_tcpudp              19584  1

xt_pkttype            18304  3

ipt_LOG            22788  8

xt_limit              19076  8

binfmt_misc            28040  1

ipt_REJECT            20352  3

xt_state              18944  4

iptable_mangle        19712  0

iptable_nat            23688  0

nf_nat                35736  1 iptable_nat

iptable_filter        19840  1

cpufreq_conservative    24456  0

cpufreq_userspace      22660  0

cpufreq_powersave      18176  0

nf_conntrack_netbios_ns    19200  0

nf_conntrack_ipv4      27652  7 iptable_nat,nf_nat

acpi_cpufreq          26380  3

nf_conntrack          79188  5 xt_state,iptable_nat,nf_nat,nf_conntrack_netbios_ns,nf_conntrack_ipv4

speedstep_lib          21508  0

ip_tables              30224  3 iptable_mangle,iptable_nat,iptable_filter

ip6_tables            31376  0

x_tables              33668  9 xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
microcode              30608  0

firmware_class        25984  1 microcode

fuse                  66332  3

loop                  35332  0

dm_mod                78676  0

rtc_cmos              27168  0

rtc_core              37148  1 rtc_cmos
i2c_i801              26128  0

rtc_lib                19328  1 rtc_core
i2c_core              41108  1 i2c_i801
button                25360  0

igb                    89604  0

sg                    52020  0

usbhid                60260  0

hid                    53708  1 usbhid
ff_memless            21896  1 usbhid
uhci_hcd              40848  0

ehci_hcd              52492  0

usbcore              164684  4 usbhid,uhci_hcd,ehci_hcd

sd_mod                45208  4

edd                    26440  0

ext3                  155784  2

mbcache                25348  1 ext3

jbd                    73376  1 ext3

fan                    22660  0

mptsas                47624  3

mptscsih              43648  1 mptsas
mptbase                77016  2 mptsas,mptscsih
scsi_transport_sas    48256  1 mptsas

scsi_mod              168308  5 sg,sd_mod,mptsas,mptscsih,scsi_transport_sas

thermal                39452  0

processor              67504  2 acpi_cpufreq,thermal

---

Code:

---

linux-hq6n:/home/ingres/Desktop # ifconfig


eth0      Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4C 

          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:1822 errors:0 dropped:0 overruns:0 frame:0

          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000
          RX bytes:130611 (127.5 Kb)  TX bytes:4110 (4.0 Kb)

          Memory:b1a20000-b1a40000



eth1      Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4D 

          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:2843 errors:0 dropped:0 overruns:0 frame:0

          TX packets:33 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:192843 (188.3 Kb)  TX bytes:5152 (5.0 Kb)

          Memory:b1a00000-b1a20000

lo        Link encap:Local Loopback 

          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:6493 errors:0 dropped:0 overruns:0 frame:0

          TX packets:6493 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0

          RX bytes:928592 (906.8 Kb)  TX bytes:928592 (906.8 Kb)


linux-hq6n:/home/ingres/Desktop #

---

If you are still having problems with this, here is what I see.

You have two identical network cards:

Code:

---

1:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)
01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)

---

They use the igb driver, which is loading:

Code:

---

Size  Used by
igb                    89604  0

---

And it does seem to have a network connection, on both cards:

Code:

---

eth0  Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4C 
          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1822 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:130611 (127.5 Kb)  TX bytes:4110 (4.0 Kb)
          Memory:b1a20000-b1a40000

eth1  Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4D 
          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2843 errors:0 dropped:0 overruns:0 frame:0
          TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:192843 (188.3 Kb)  TX bytes:5152 (5.0 Kb)
          Memory:b1a00000-b1a20000

---

You do seem to be connected to a network, as your cards have IP addresses assigned to them. If your problem is that you cannot connect to the internet, then I would guess that you need to configure the cards.

You need to run YaST, and go to the network configuration page. There you need to set a default gateway for each device. The default gateway is usually the IP address of the router that has internet access. Afterwards, you may need to reboot.

Hope this helps.

I just noticed something, both cards have the exact same IP address! I don't think that this is possible using DHCP. Did you manually configure the IP address?

You may want to change this.

Yes i already did it the configuration on YAST i manually configure it. the eth0 and eth1. i also try to configure it in defferent IP. but still i cannot ping another PC in the network..
I can't understand why? since i am a newbie in linux...thanks waterhead...... more help plsssssss....

Use DHCP to assign the IP address. If you need to have a specific IP address, have the router assign it. And do you really need two network cards? Remove one of them to help simplify things.

Like I already said, you need to tell it where the router is. This is done by putting the router's IP address in the "default gateway" section.

i need to configure it with static ip because i used it for a server. the two network card is built-in in intel modular server MFSYS25. i need to connect to this server throught IP address but i connot ping the server. i tried to configure the ip add. by this command; ifconfig eth0 192.168.50.250
then i can ping the other PC in my network but when i restart the server it will return to old problem witch i cannot ping again..