how to mount usb drive

hello guyz .. bit stupid question but i dont know so thats y asking here i plug in my LG FLATARON usb drive system detect but gives eror


cannot enter media/usb/a4s(long no here)


so how can i fix it or use my usb is there any solution :S

Could not enter folder /media/usb-storage-odd-0x090a-0x1001:0:0:0p1

:S plz any one help me :"(

Hi,

Try to enter on /proc/bus/usb/devices and find the reference of ur usb perepheral.
If it's there;

create a directory on /mnt/usb
try to mount the perepheral (if it's a flash disk for example) : mount /dev/sda1 /mnt/usb

good luck :D

thnx man for replying but i enter proc and then usb then devices but only the folder named as 01, 02 , 03 , 04

and then file with this name i dont know the exetension
"

devices_please-use-sysfs-instead

also ... i forget to mention when i plug the usb then it ask that new hardware detected use it or not .. it ask this for 4 time and also there is 4 folders and i think there are 4 files in the usb :) .. so

any idea plz help thnx :?:

mount -t usbfs none /proc/bus/usb

it results in

mount: none already mounted or /proc/bus/usb busy
mount: according to mtab, usbfs is already mounted on /proc/bus/usb
linux:~ #

now i hope eror is clear to experts

mohsin, try the following in the command line:

Code:

---

su

---

enter the rootpassword, then

Code:

---

mkdir /mnt/usb
mount /dev/sda1 /mnt/usb

---

that should work, for a fuller tutorial, have a look here;

dylunio

all in vain .. its another type i think file system is not matching ;9

mohsin, what filesystem is the drive? is it FAT32 or ntfs?

try the two following options:

Code:

---

su

---

now enter the root password, then

Code:

---

mount -t vfat /dev/sda1 /mnt/usb

---

if that doesn't work try:

Code:

---

mount -t ntfs /dev/sda1 /mnt/usb

---

dylunio

i'll try it . thnx for replying

Dear Mohsin and all at this thread,
Assalamo Alaikum Wa Rahmatullah,

i had the same problem as mohsin, i tried all the solutions provided here... but found 5 folders 02, 03......

what i did is as below...
*******************************
root@slax:~# fdisk -l

Disk /dev/scsi/host0/bus0/target0/lun0/disc: 40.0 GB, 40020664320 by
tes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End
Blocks Id System
/dev/scsi/host0/bus0/target0/lun0/part1 * 1 1001
8040501 83 Linux
/dev/scsi/host0/bus0/target0/lun0/part2 1002 1071
562275 82 Linux swap

Disk /dev/scsi/host3/bus0/target0/lun0/disc: 128 MB, 128450560 bytes
16 heads, 32 sectors/track, 490 cylinders
Units = cylinders of 512 * 512 = 262144 bytes

Device Boot Start End Blocks Id System
/dev/scsi/host3/bus0/target0/lun0/part1 * 1 490 125424 6 FAT16



root@slax:~# mount -t fat16 /dev/scsi/host3/bus0/target0/lun0/part1/mnt/usb
mount: fs type fat16 not supported by kernel

root@slax:~# mount -t fat /dev/scsi/host3/bus0/target0/lun0/part1 /mnt/usb
mount: fs type fat not supported by kernel

root@slax:~# mount -t vfat /dev/scsi/host3/bus0/target0/lun0/part1 /mnt/usb

root@slax:~# cd /mnt/usb

root@slax:/mnt/usb# ls
Install/ Personal/ RFQJavaDecember8th.doc* bookmark.htm*
New\ Folder/ Phone.txt* Readables/ emails.txt*
root@slax:/mnt/usb#
************************************************** ******

so i found.... my data.. :)
Was'Salaam

Iqbal Sajid (+92 (300) CD-BILLS)
+92 (21) 111-CSM-CSM