I'm attempting to set up a master/slave system which has these partitions:
hda: Boots from master boot record
hdb: Boots from boot partition
As you can see, I've set up 2 hard drives that mirror each other. The only difference is that the master boots from the MBR and the slave boots from the boot partition.
So far this setup is working. The next step is to create an rsync setup that willl copy the entire master to the slave.
The idea for this setup is to implement the slave unit if the master fails.
I know this is much easier if you use a raid1 setup but, I want to take advantage of my full drive space on both 80 g drives.
Any Ideas for the rsync setup?