Find the answer to your Linux question:
Results 1 to 2 of 2
hello everybody The problem troubled me very long time. My platform is: ARM9 (S3C2410) with 3 serials Linux 2.6.14.7 GPS (Oncore M12T) I used the serial to receive the GPS ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2008
    Posts
    2

    Exclamation why the serials go bad every 5000 seconds


    hello everybody
    The problem troubled me very long time.
    My platform is:
    ARM9 (S3C2410) with 3 serials
    Linux 2.6.14.7
    GPS (Oncore M12T)

    I used the serial to receive the GPS data. The data comes smoothly every 1 second.That means , the serial should receive the data every 1 second. But when the serial have received about 5000 seconds ( nearly 1.25 hours), it goes bad .First , the next data will late for nearly 1 second, and then the following data comes just 0.2 delay for chasing the previous data. After some time , it goes to normal. See this:



    the line means the interval between two GPS data received from serial and the number is the second sequence and it happens every about 5000 seconds periodic. Also see this:





    Buddies, What makes this happen or How does it happen?
    The Kernel or The Drivers?
    The hardware is ok, I've tested it many times and this problem also happens on my X86 ubuntu with kernel 2.6.18, it just better than the arm cause it comes about 10 hours.

    Thank you everybody

  2. #2
    Just Joined!
    Join Date
    Jul 2008
    Posts
    2
    No One Can Help Me?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •