Find the answer to your Linux question:
Results 1 to 6 of 6
Hi everybody i am trying to compile the kernel of xubuntu 9.04 but i have some problems with it. according to below instructions i must be able to do it.but ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Nov 2008
    Posts
    64

    How to compile kernel?(Problem)


    Hi everybody i am trying to compile the kernel of xubuntu 9.04 but i have some problems with it.
    according to below instructions i must be able to do it.but when i use fakeroot make-kpkg – -initrd – -append-to-version=-mw4 kernel_image kernel_headers command it gives error
    the error is Error: Unknown target – Unknown target –
    use --targets to display help on valid targets

    how can i solve this problem has anybody come across with this problem before?




    link:How to Compile an Ubuntu 9.04 Kernel | EasyLinuxCDs.com



    Compile an Ubuntu 9.04 Kernel

    The purpose of this tutorial is to show you how to set up a kernel that is highly tuned for your CPU, in this case a Pentium 4 with hyperthreading for a workstation.

    Caution: If you do something wrong..it happens…be sure to reboot and select an alternative kernel. You should always have several kernels in case of trouble. DO THIS ON A TEST MACHINE or make sure you have a good backup.

    Step #1: Download and install the necessary tools.
    Download the necessary tools so that you have everything ready.

    # apt-get install kernel-package libncurses5-dev fakeroot wget bzip2

    You must have the source available to create a new kernel.

    # apt-get install linux-source

    You must be in the /usr/src directory to work or copy the source,
    linux-source-2.6.28.tar.bz2, to the directory you want to work in. Either move into the /usr/src directory to work or into the alternative directory you will make the build in.

    # cd /usr/src

    This directory will contain the necessary headers to build the kernel. These are the source files.

    You need to unpack the source that was downloaded.

    # bzip2 -d linux-source-2.6.28.tar.bz2
    # tar xvf linux-source-2.6.28.tar

    Now you should have a directory that looks like this:

    linux-source-2.6.28

    Create a symbolic link to this source directory and name it linux.

    # ln -s linux-source-2.6.28 linux

    Move into the directory, you can use the term linux as it is now a link to that folder.

    # cd linux

    The config file is a hidden file that has the configuration from the kernel that is installed. You will need to copy that because it has already determined your hardware devices.

    # cp /boot/config-`uname -r` ./.config

    When you copy this config file over, it is a file represents the hardware that the kernel discovered at boot and set up. It also reflects many default settings.

    Step #2: Now the fun begins….

    You are ready to start menuconfig which will allow you to choose your kernel specifics.

    make menuconfig

    This opens the menu to start configuration.

    Here you see it detected the .config file.

    Now work your way through the menus and make the selections that you want to add or subtract. For example, here KVM is changed from being a module to load to actually being made a part of the kernel. It has been unchecked so modular support will not be available, thus saving space in your kernel. The “*” indicates that it will be loaded into the kernel and an empty option means that no support for that option will be placed in the kernel.

    If you know about your hardware you can increase your speed by making the kernel smaller by removing those modules that you do not need. It is important that you make changes slowly so that if you have problems you have fewer places to troubleshoot.

    Once you have all of your modifications complete save the new .config file.

    Run this command to clean up.

    # make-kpkg clean

    The next thing you want to do is create a kernel extension so that as you make kernels you are able to tell the versions apart. What I usually do is place my initials and a number so that I can keep track.

    # fakeroot make-kpkg – -initrd – -append-to-version=-mw4 kernel_image kernel_headers

    After –append-to-version= you write a string that will help you keep track of your kernel changes, it must begin with a minus (-) and must not contain whitespace.

    This will take awhile. This can take 3-6 hours depending on your CPU and memory.

    After the successful kernel build, you can find two .deb packages in the directory you built the kernel in. If you were located in the linux directory, look in the directory above for the two .deb packages.

    Now you can install and create .deb files so you can take your kernel to another machine with similar hardware. Run these commands as root in order to install them into the boot directory and modify your /boot/grub/menu.lst.

    # dpkg -i linux-image-2.6.28.9mw4_2.6.28.9mw4-10.00.Custom_i386.deb

    # dpkg -i linux-headers-2.6.28.9mw4_2.6.28.9mw4-10.00.Custom_i386.deb

    You should now be able to select and test the new kernel when you reboot.

    Now when I look in /boot/grub/menu.lst I see listed my new kernel:

    ## ## End Default Options ##

    title Ubuntu 9.04, kernel 2.6.28.9mw4
    uuid 10517256-c276-4517-821a-4986d477bb86
    kernel /boot/vmlinuz-2.6.28.9mw4 root=UUID=10517256-c276-4517-821a-4986d477bb86 ro quiet splash
    quiet

    title Ubuntu 9.04, kernel 2.6.28.9mw4 (recovery mode)
    uuid 10517256-c276-4517-821a-4986d477bb86
    kernel /boot/vmlinuz-2.6.28.9mw4 root=UUID=10517256-c276-4517-821a-4986d477bb86 ro single

    title Ubuntu 9.04, kernel 2.6.28-11-generic
    uuid 10517256-c276-4517-821a-4986d477bb86
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=10517256-c276-4517-821a-4986d477bb86 ro quiet splash
    initrd /boot/initrd.img-2.6.28-11-generic
    quiet

    title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
    uuid 10517256-c276-4517-821a-4986d477bb86
    Caution: You will need space in the /boot directory to save kernels as you build them. I typically build my /boot directory with 500 MBs of space.

    Tip:

    Edit your timeout in the /boot/grub/menu.lst and increase it when you are building and trying kernels. That way it will not fly by so fast.

    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout 8

    Tip:

    Comment out the hiddenmenu so that you will see the menu on boot.

  2. #2
    tpl
    tpl is offline
    Linux User
    Join Date
    Jan 2007
    Location
    cleveland
    Posts
    477
    try it like this:

    fakeroot make-kpkg --initrd -append-to-version=-mw4 kernel_image kernel_headers

    there's some extra punctuation in the HOWTO
    the sun is new every day (heraclitus)

  3. #3
    Just Joined!
    Join Date
    Nov 2008
    Posts
    64
    i did as you sad it worked but at he end of the process it gave the problem that error 255.

    by the way what are the differences between make all command and fakeroot i have found lots of command about building the kernel.

  4. #4
    Linux Guru coopstah13's Avatar
    Join Date
    Nov 2007
    Location
    NH, USA
    Posts
    3,149
    I've found this guide to always work for me, I've used it on ubuntu as well.
    8.6.*Compiling a New Kernel

  5. #5
    Just Joined!
    Join Date
    Nov 2008
    Posts
    64
    i am doing everything but there is no file which has .deb extension after process

  6. #6
    Just Joined!
    Join Date
    Aug 2009
    Posts
    3
    I am thinking compiling kernel myself. I am reading something about it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •