Welcome to Linux Forums! With a comprehensive Linux Forum, information on various types of Linux software and many Linux Reviews articles, we have all the knowledge you need a click away, or accessible via our knowledgeable members.
Write an article for LinuxForums Today! Win Great Prizes!
Problem with hwsetup.c (Knoppix hardware detection), booting from USB pen drive
Hi everybody! I'm new in this forum.
I am installing a Linux distribution on a USB pen drive. Once I had configured the kernel, I have installed the bash shell, the grub and the following packages: coreutils, e2fsprogs, sysvinit, util-linux.
Now I want to automatically detect mouse when booting from the pen drive. I have modified the knoppix hwsetup.c file as follows:
Code:
/****************************************************************************\
* HWSETUP - non-interactive hardware detection and configuration *
* loads modules, generates /dev links, no isapnp autoconfiguration (yet) *
* needs kudzu-devel (ver. 0.23 and up) *
* Author: Klaus Knopper <knopper@knopper.net> *
\****************************************************************************/
/* Needed for strcasestr */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE 1
#endif
#include <stdio.h>
#include <string.h>
#include <ctype.h>
#include <unistd.h>
#include <stdlib.h>
#include <errno.h>
#include <signal.h>
#include <time.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/stat.h>
#include <pci/pci.h>
#undef _i_wanna_build_this_crap_
/* #define _i_wanna_build_this_crap_ 1 */ /* Necessary for ISAPNP */
#include <kudzu/kudzu.h>
#if defined(_i_wanna_build_this_crap_)
#include "isapnp.h"
#endif
#define VERSION "HWSETUP 1.2, an automatic hardware configuration tool\n" \
"(C) 2006 Klaus Knopper <knoppix@knopper.net>\n\n"
/* Note: These are for Xfree 4, not Xorg. */
#define CARDSDB "/usr/share/hwdata/Cards"
#define XPATH "/usr/X11R6/bin/"
#define XMODPATH "/usr/X11R6/lib/modules/drivers/"
#define VERBOSE_PRINT 1
#define VERBOSE_PROMPT 2
#define SKIP_AUDIO 1
#define SKIP_SCSI 2
#define MAX_TIME 180 /* Maximum of seconds to run, total */
#define MAX_TIME_MODULE 4 /* Maximum time in seconds to wait until a module */
/* is successfully loaded before continuing */
#ifdef BLACKLIST
/* Do not, under any circumstances, load these modules automatically, */
/* even if in pcitable. (libkudzu may ignore this, and the KNOPPIX */
/* autoconfig scripts may probe them, too) */
char *blacklist[] =
{ "apm","agpgart","yenta_socket","i82092","i82365","tcic",
"pcmcia_core","ds","ohci1394","hisax", "hisax_fcpcipnp",
"hisax_isac","hisax_st5481",
/* Winmodems, unusable, can block sound slot */
"snd-atiixp-modem", "snd-intel8x0m","snd-via82xx-modem"
};
#endif
/* If a conflicting module in a row is already loaded, the new module will not be probed anymore */
#define CONFLICT_SET 2
struct conflict { char *name; int loaded; } conflicts [][CONFLICT_SET] =
{
{{ "ad1848",0}, {"snd-nm256",0}},
{{ "ali5455",0}, {"intel8x0",0}},
{{ "cmpci",0}, {"snd-cmipci",0}},
{{ "cs46xx",0}, {"snd-cs46xx",0}},
{{ "cs4281",0}, {"snd-cs4281",0}},
{{ "emu10k1",0}, {"snd-emu10k1",0}},
{{ "es1370",0}, {"snd-ens1370",0}},
{{ "es1371",0}, {"snd-ens1371",0}},
{{ "esssolo1",0}, {"snd-es1938",0}},
{{ "forte",0}, {"snd-fm801",0}},
{{ "i810_audio",0}, {"snd-intel8x0",0}},
{{ "maestro",0}, {"snd-es1960",0}},
{{ "maestro3",0}, {"snd-maestro3",0}},
{{ "nm256_audio",0}, {"snd-nm256",0}},
{{ "rme96xx",0}, {"snd-rme9652",0}},
{{ "sonicvibes",0}, {"snd-sonicvibes",0}},
{{ "trident",0}, {"snd-trident",0}},
{{ "via82cxxx_audio",0}, {"snd-via82xx",0}},
{{ "ymfpci",0}, {"snd-ymfpci",0}},
{{ "sk98lin",0}, {"skge",0}}
};
struct loaded_module { char *name; struct loaded_module *next; } *loaded_modules = NULL;
/* compare module names, case insensitive and with -/_ */
int modcmp(char *m1, char *m2)
{
if(!m1 || !m2) return 1;
for(;;)
{
int c1 = tolower(*m1);
int c2 = tolower(*m2);
if(c1 == '_') c1 = '-';
if(c2 == '_') c2 = '-';
if(c1 != c2) return 1;
if(!c1 || !c2) break;
m1++; m2++;
}
return 0;
}
/* returns true if module already loaded */
int check_loaded(char *name)
{
struct loaded_module *curr = loaded_modules;
while(curr)
{
if(name && curr->name && !modcmp(name, curr->name)) return 1;
curr = curr->next;
}
return 0;
}
/* Returns name of conflicting module, or NULL if no conflict */
char *check_conflict(char *name)
{
int i;
if(!name) return 0;
for(i=0; i<(sizeof(conflicts)/sizeof(struct conflict)/CONFLICT_SET); i++)
{
int j;
for(j=0; j<CONFLICT_SET; j++)
{
if(!modcmp(name,conflicts[i][j].name) &&
conflicts[i][!j].loaded) return conflicts[i][!j].name;
}
}
return NULL;
}
void set_conflict(char *name)
{
int i;
if(!name) return;
for(i=0; i<(sizeof(conflicts)/sizeof(struct conflict)/CONFLICT_SET); i++)
{
int j;
for(j=0; j<CONFLICT_SET; j++)
{
if(!modcmp(name,conflicts[i][j].name)) conflicts[i][j].loaded=1;
}
}
}
void check_proc_modules(void)
{
struct loaded_module *curr = NULL, *new = NULL;
FILE *f = fopen("/proc/modules", "r");
if(!f) return;
for(;;)
{
char buffer[1024], *name;
memset(buffer,0,sizeof(buffer));
if(!fgets(buffer,1024, f) || ferror(f)) break;
new = (struct loaded_module *) malloc(sizeof(struct loaded_module));
if(!new) { fclose(f); return; }
memset(new,0,sizeof(struct loaded_module));
if(!loaded_modules) { loaded_modules = curr = new; }
else
{
curr->next = new;
curr = curr->next;
}
name = strtok(buffer," ");
if(!name) continue;
curr->name = strdup(name);
set_conflict(name);
}
fclose(f);
}
char *get_description(struct device *d)
{
/* pci.ids lookup using the pci library, i.e. most likely /usr/share/misc/pci.ids */
static char devbuf[128];
memset(devbuf,0,sizeof(devbuf));
if(d)
{
static struct pci_access *pacc = NULL;
int vendorid, deviceid;
switch(d->bus)
{
case BUS_PCI: vendorid=((struct pciDevice *)d)->vendorId;
deviceid=((struct pciDevice *)d)->deviceId;
break;
case BUS_USB: vendorid=((struct usbDevice *)d)->vendorId;
deviceid=((struct usbDevice *)d)->deviceId;
break;
default: return d->desc;
}
if(!pacc)
{
if(!(pacc=pci_alloc())) return d->desc;
pci_init(pacc);
}
if(vendorid>0 && deviceid>0 &&
pci_lookup_name(pacc, devbuf, sizeof(devbuf),
PCI_LOOKUP_VENDOR | PCI_LOOKUP_DEVICE,
vendorid, deviceid, 0, 0))
{
devbuf[127]=0;
return devbuf;
}
}
return d->desc;
}
/* These need to be global, so we can kill them in case of problems */
pid_t wpid=0;
int syntax(char *option)
{
printf(VERSION);
if(option) fprintf(stderr,"hwsetup: Unknown option '%s'\n\n",option);
printf("Usage: hwsetup\n"
" -v be verbose\n"
" -p print rotating prompt\n"
" -a ignore audio devices\n"
" -s ignore scsi controllers\n"
" -n probe only, don't configure anything.\n");
return option?1:0;
}
pid_t startwheel(void) /* Feedback while detecting hardware */
{
char v[]="Autoconfiguring devices... ";
char r[]="/-\\|";
char *b="\b";
pid_t pid;
if((pid=fork())>0) return pid; /* return Child PID to Master process */
else if(pid==0)
{
int i,j;
/* Allow killing of process */
signal(SIGHUP,SIG_DFL);
signal(SIGINT,SIG_DFL);
signal(SIGTERM,SIG_DFL);
write(2,v,sizeof(v)-1);
for(i=j=0;;i++,j++)
{
if(j%8==7) write(2,"\033[42;32m \033[0m",13); /* a green space */
write(2,&r[i%4],1); write(2,b,1);
usleep(40000);
}
exit(0); /* Exit child process */
}
return 0;
}
int exists(char *filename)
{
struct stat s;
return !stat(filename,&s);
}
struct xinfo {
char xserver[16];
char xmodule[16];
char xdesc[128];
char xopts[128];
};
void hw_info(struct device *d)
{
enum deviceClass class=d->type;
enum deviceBus bus=d->bus;
char *unknown="UNKNOWN";
char *desc;
/* These used to be much easier when they were still arrays... */
char *classname=class==CLASS_UNSPEC?"UNSPEC": class==CLASS_OTHER?"OTHER":
class==CLASS_NETWORK?"NETWORK":class==CLASS_SCSI?"SCSI":
class==CLASS_VIDEO?"VIDEO": class==CLASS_AUDIO?"AUDIO":
class==CLASS_MOUSE?"MOUSE": class==CLASS_MODEM?"MODEM":
class==CLASS_CDROM?"CDROM": class==CLASS_TAPE?"TAPE":
class==CLASS_FLOPPY?"FLOPPY": class==CLASS_SCANNER?"SCANNER":
class==CLASS_HD?"HD": class==CLASS_RAID?"RAID":
class==CLASS_PRINTER?"PRINTER":class==CLASS_CAPTURE?"CAPTURE":
class==CLASS_USB?"USB": class==CLASS_MONITOR?"MONITOR":
class==CLASS_KEYBOARD?"KEYBOARD":unknown;
char *busname= bus==BUS_OTHER?"OTHER": bus==BUS_PCI? "PCI":
bus==BUS_SBUS?"SBUS": bus==BUS_PSAUX?"PSAUX":
bus==BUS_SERIAL?"SERIAL":bus==BUS_PARALLEL?"PARALLEL":
bus==BUS_SCSI?"SCSI": bus==BUS_IDE?"IDE":
bus==BUS_DDC?"DDC": bus==BUS_USB?"USB":
bus==BUS_KEYBOARD?"KEYBOARD":
#if defined(_i_wanna_build_this_crap_)
bus==BUS_ISAPNP?"ISAPNP":
#endif
unknown;
desc = get_description(d);
printf(
"---\n"
"class: %s\n"
"bus: %s\n"
"device: %s\n"
"driver: %s\n"
"desc: %s\n",classname, busname, d->device?d->device:"(null)",d->driver,
desc?desc:"(empty)");
}
/* rename /dev/mouse -> /dev/mouse1, /dev/mouse1 -> /dev/mouse2 recursive */
int checkmoveup(char *filename, int oldnum)
{
int newnum=oldnum+1;
char srcname[64], dstname[64];
struct stat buf;
sprintf(srcname,(oldnum>0)?"%.32s%d":"%.32s",filename,oldnum);
if(stat(srcname,&buf)) return 0; /* File does not exist, OK. */
sprintf(dstname,"%.32s%d",filename,newnum);
/* recursive if file exists, otherwise just rename it */
return (!stat(dstname,&buf) && checkmoveup(filename,newnum))?errno:
rename(srcname,dstname);
}
int link_dev(struct device *d, char *target, int tnum, int verbose)
{
const char devdir[]="/dev/";
if(d&&d->device)
{
char devname[64], dstname[64];
sprintf(devname,"%s%.32s",devdir,d->device);
sprintf(dstname,"%s%.32s",devdir,target);
if(checkmoveup(dstname, tnum)) return -1; /* Read-only FS?! */
if(tnum>0) sprintf(dstname,"%s%.32s%1d",devdir,target,tnum);
if(verbose&VERBOSE_PRINT) printf("symlink(%.32s,%.32s)\n",devname,dstname);
return symlink(devname,dstname);
}
return -1;
}
void segfault_handler(int dummy)
{
signal(SIGSEGV,SIG_IGN);
fprintf(stderr,"\nWARNING: Caught signal SEGV while executing modprobe.\n");
fflush(stderr);
}
void alarm_handler(int dummy)
{
signal(SIGALRM,SIG_IGN);
fprintf(stderr,"\nWARNING: Autodetection seems to hang,\n"
"please check your computers BIOS settings.\n");
fflush(stderr);
if(wpid) { kill(wpid,SIGTERM); usleep(2500000); kill(wpid,SIGKILL); wpid=0; }
exit(1); /* exit program */
}
int load_mod(char *m,int verbose)
{
int pstatus,i;
time_t now;
pid_t mpid;
char *cc;
if((m==NULL)||(!strcmp("unknown",m))||(!strcmp("ignore",m))|| check_loaded(m)) return 0;
#ifdef BLACKLIST
for(i=0;i<(sizeof(blacklist)/sizeof(char*));i++)
{
if(!modcmp(blacklist[i],m))
{
if(verbose&VERBOSE_PRINT) printf("not loading module %.32s (is in blacklist)\n",m);
return 0;
}
}
#endif
if((cc=check_conflict(m))!=NULL)
{
if(verbose&VERBOSE_PRINT) printf("not loading module %.32s (conflicts with loaded module '%.32s' for same device)\n", m, cc);
return 0;
}
if((mpid=fork())==0)
{ /* child process */
if(verbose&VERBOSE_PRINT) printf("modprobe(%.32s)\n",m);
signal(SIGSEGV,segfault_handler);
/* Send modprobe errors to /dev/null */
if(!(verbose&VERBOSE_PRINT)) freopen("/dev/null","w",stderr);
execl("/sbin/modprobe","modprobe",m,NULL);
exit(1);
}
now=time(0);
do
{
usleep(125000); /* Delay 1/8s */
/* We SHOULD wait for modprobe to finish! */
if(waitpid(mpid,&pstatus,WNOHANG)) break;
}
while((time(0) - now) < MAX_TIME_MODULE);
set_conflict(m);
return pstatus;
}
int writeconfig(char *name,struct device *d,int verbose)
{
FILE *f,*k;
const char *kconfig="/etc/sysconfig/knoppix";
char *desc;
unlink(name);
if((f=fopen(name,"w"))==NULL)
{ /* Read-only filesystem on /etc ?! */
fprintf(stderr,"Can't write to '%s': %s",name,strerror(errno));
return 1;
}
if((k=fopen(kconfig,"a"))==NULL) { fclose(f); return 1; }
if(verbose&VERBOSE_PRINT)
{
printf("write config(%s)\n",name);
printf("update config(%s)\n",kconfig);
}
desc = get_description(d);
switch(d->type)
{
case CLASS_MOUSE:
{
char *t1,*t2;
if(d->bus==BUS_PSAUX) { t1="ps2"; t2="PS/2"; }
else if(d->bus==BUS_USB) { t1="imps2"; t2="IMPS/2"; }
else { t1="ms"; t2="Microsoft"; }
fprintf(f,"MOUSETYPE=\"%s\"\nXMOUSETYPE=\"%s\"\n",t1,t2);
if(desc) fprintf(f,"FULLNAME=\"%s\"\n",desc),
fprintf(k,"MOUSE_FULLNAME=\"%s\"\n",desc);
if(d->device) fprintf(f,"DEVICE=\"/dev/%s\"\n",d->device),
fprintf(k,"MOUSE_DEVICE=\"/dev/%s\"\n",d->device);
}; break;
default: break;
}
fclose(f); fclose(k);
return 0;
}
int hw_setup(enum deviceClass dc, int verbose, int probeonly, int skip)
{
int i,mouse=0,cdrom=0,modem=0,scanner=0;
struct device **currentDevs, *d, *serialmouse=NULL, *usbmouse=NULL;
if(verbose&VERBOSE_PROMPT) wpid=startwheel();
currentDevs=probeDevices(dc,BUS_UNSPEC,PROBE_ALL);
if(verbose&VERBOSE_PROMPT&&wpid>0) { kill(wpid,SIGTERM); wpid=0; usleep(160000); write(2,"\033[0m Done.\n",11); }
if(currentDevs==NULL) return -1;
check_proc_modules(); /* Get currently loaded module list */
for(i=0;(d=currentDevs[i]);i++)
{
if(verbose&VERBOSE_PRINT) hw_info(d);
if(!probeonly)
{
#if defined(_i_wanna_build_this_crap_)
if(d->bus==BUS_ISAPNP&&configure_isapnp(d,verbose)) continue;
#endif
switch(d->type)
{
case CLASS_MOUSE: /* Choose serial over PS2/USB mouse IF present */
/* For some reason, PS/2 ALWAYS detects a mouse */
if(d->bus==BUS_SERIAL)
{ mouse=0; serialmouse=d; }
else if(d->bus==BUS_USB) /* Need usbdevfs for */
{ mouse=0; usbmouse=d; /* this to work */
load_mod(d->driver,verbose); }
if(!mouse)
writeconfig("/etc/sysconfig/mouse",d,verbose);
link_dev(d,"mouse",mouse++,verbose);
break;
default: /* do nothing */ break;
}
}
}
return 0;
}
int main(int argc, char **argv)
{
int i, verbose=0, probeonly=0, skip=0;
enum deviceClass dc=CLASS_UNSPEC;
for(i=1;i<argc;i++)
{
if(!strcasecmp(argv[i],"-v")) verbose|=VERBOSE_PRINT;
else if(!strcasecmp(argv[i],"-p")) verbose|=VERBOSE_PROMPT;
else if(!strcasecmp(argv[i],"-a")) skip|=SKIP_AUDIO;
else if(!strcasecmp(argv[i],"-s")) skip|=SKIP_SCSI;
else if(!strcasecmp(argv[i],"-n")) probeonly=1;
else return syntax(argv[i]);
}
/* Allow SIGTERM, SIGINT: rmmod depends on this. */
signal(SIGTERM,SIG_DFL); signal(SIGINT,SIG_DFL);
signal(SIGALRM,alarm_handler); alarm(MAX_TIME);
return hw_setup(dc,verbose,probeonly,skip);
}
and I have copied it into the bin folder of my pen drive.
Then I have written the following script to run the program:
I have copied it into the etc/init.d folder and I have created a symbolic link to it into the etc/rcS.d folder.
On booting from my pen drive I receive a segmentation fault error. It seems that the problem stands in the probeDevices function (which is called in the hw_setup function), but I don't understand why.
Could it be a problem with the kudzu library?
Добрый день!
40 минут и сауна у вас дома
Малые габариты, 220 В, малая мощность.это очень просто, бесплатно доставим и установим в любом месте - Инфракрасная сауна для квартиры и бизнеса
Open Source Security Myths Dispelled Dispel the five major myths surrounding Open Source Security and gain the tools necessary to make a truly informed decision for your IT organization subscribe
InformationWeek InformationWeek is the only newsweekly you'll need to stay on top of the latest developments in information technology. subscribe