rck_hitokiri

Hello, this is my first time to use DSL on my comp. I booted the live cd and everything was great, theres an internet connection and my lan card was detected, after installing it on a 6gb hardisk, i cant use my internet cause it did not dewtect my card, i have tried lspci and found my card was listed there which is realtek ethernet adapter. Thanks, and please help me.

bryansmith

Let's try this first:

Type 'ifconfig' into a terminal (if that doesn't work, try /sbin/ifconfig) to figure out what device your network card is. After that is figured out, type (as root) 'ifup ethX' (replace X with your device number').

__________________
Looking for a distro? Look here.
"There can be no doubt that all our knowledge begins with experience." - Immanuel Kant (Critique of Pure Reason)
Queen's University - Arts and Science 2008 (Sociology)
Registered Linux User #386147.

rck_hitokiri

thanks for helping... i tried what you asked and did sudo ifconfig but i didnt see my card listed as eth0 or any value... i tried lspci and saw that my realtek adapter was there with a driver... strange why i cant use it, if any have more suggestions please post here i also tried ifup eth0 and didnt work.. funny i never had this problem on ubuntu. Thanks for helping, please reply.

tech_man

Post the output of "lsmod".

__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt.'
--Abraham Lincoln

rck_hitokiri

i did sudo lsmod and the terminal displayed it, but one thing.. in ubuntu i can copy paste from the terminal and put it into any text editor, on dsl.. i cant? why is this so.... i was gonna post my lsmod. Although i did not see my network adapter on lsmod, nut it is listed on dsl system stats as realtek RTK, driver 8139too. Sorry for the inconvinience. what should i do now?

bryansmith

Try loading the module for the 8139too:After that, try some of the other steps we have suggested.

BTW, I'm not sure I want to help a Decepticon .

__________________
Looking for a distro? Look here.
"There can be no doubt that all our knowledge begins with experience." - Immanuel Kant (Critique of Pure Reason)
Queen's University - Arts and Science 2008 (Sociology)
Registered Linux User #386147.

rck_hitokiri

Hey i tried sudo modprobe 8139too, and this is what came out.

Hint: insmod errors can be used by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more info in syslog or the output from dmesg /lib/modules/2.4/kernel/drivers/net/b44.o: insmod /lib/modules/2.4/kernel/drivers/net/b44.o: failed /lib/modules/2.4/kernel/drivers/net/b44.o: insmod 8139too failed.

Dont know what to do now.... i tried swapping it on the other pci slot and it still is missing, dont know whats wrong... it worked fine with the live cd. thanks for your help autobot. i appreciate it.

rck_hitokiri

heres my system status:
dsl-3.2 Sun Feb 11 03:32:46 2007
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 664.992
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1327.10

total: used: free: shared: buffers: cached:
Mem: 262356992 71098368 191258624 0 1794048 42364928
Swap: 600403968 0 600403968
MemTotal: 256208 kB
MemFree: 186776 kB
MemShared: 0 kB
Buffers: 1752 kB
Cached: 41372 kB
SwapCached: 0 kB
Active: 21912 kB
Inactive: 40604 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 256208 kB
LowFree: 186776 kB
SwapTotal: 586332 kB
SwapFree: 586332 kB
FULLNAME="Realtek|RTL-8139"
DRIVER="8139too"
# Insert nameservers here
# nameserver 127.0.0.1
nameserver 206.13.28.12
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

apm 9736 1 (autoclean)
mousedev 3832 0 (unused)
hid 22372 0 (unused)
input 3168 0 [mousedev hid]
cloop 39364 0 (unused)
nls_iso8859-1 2844 0 (autoclean)
ntfs 50944 0 (autoclean)
msdos 4684 0 (autoclean)
agpgart 42660 0 (unused)
via82cxxx_audio 19448 0
ac97_codec 11884 0 [via82cxxx_audio]
uart401 6052 0 [via82cxxx_audio]
sound 55244 0 [via82cxxx_audio uart401]
soundcore 3428 4 [via82cxxx_audio sound]
parport_pc 24840 0
parport 22496 0 [parport_pc]
serial 52068 0 (autoclean)
usb-uhci 21836 0 (unused)
usbcore 57824 1 [hid usb-uhci]
pcmcia_core 39840 0
ide-cd 28704 0
ide-scsi 9040 0
rtc 7004 0 (autoclean)


Continuation on next thread:

rck_hitokiri

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
PID Uid VmSize Stat Command
1 root 76 S init [5]
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
64 root SW [khubd]
367 root 560 S /sbin/syslogd
368 dsl 1684 S -bash
369 root 508 S /sbin/getty 115200 tty2
370 root 508 S /sbin/getty 115200 tty3
371 root 508 S /sbin/getty 115200 tty4
389 dsl 1084 S /bin/sh /usr/X11R6/bin/startx
402 dsl 644 S xinit /home/dsl/.xinitrc -- /home/dsl/.xserverrc
403 root 11160 S /usr/bin/X11/Xvesa -mouse /dev/psaux,5 -screen 1024x7
405 root SW [kapmd]
407 dsl 2056 S fluxbox
416 dsl Z [iconsnap.lua]
418 dsl 2704 S xtdesk
421 dsl 1496 S fluxter
422 dsl 3224 S /bin/lua /usr/local/bin/docked.lua
423 dsl 688 S wmswallow -geometry 70x80 docked docked.lua
430 dsl 888 S torsmo
440 dsl 1024 S dpid
442 dsl 880 S /usr/local/lib/dillo/dpi/file/file.dpi
444 dsl 880 S /usr/local/lib/dillo/dpi/file/file.dpi
451 dsl 3212 S /bin/lua /usr/sbin/cpanel.lua
454 dsl 3228 S /bin/lua /usr/local/bin/stats.lua
476 dsl 980 S sh -c busybox ps | tee /tmp/stats.txt >> stats.txt
477 dsl 704 R busybox ps
478 dsl 980 R sh -c busybox ps | tee /tmp/stats.txt >> stats.txt
<4>Linux version 2.4.26 (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sa Apr 17 19:33:42 CEST 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
<4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<4>On node 0 totalpages: 65520
<4>zone(0): 4096 pages.
<4>zone(1): 61424 pages.
<4>zone(2): 0 pages.
<5>ACPI disabled because your bios is from 00 and too old
<5>You can enable it with acpi=force
<4>Kernel command line: root=/dev/hda2 quiet vga=normal noacpi noapm nodma noscsi frugal
<4>Local APIC disabled by BIOS -- reenabling.
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>Detected 664.992 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1327.10 BogoMIPS
<6>Memory: 256068k/262080k available (1371k kernel code, 5624k reserved, 561k data, 140k init, 0k highmem)
<6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 03
<4>per-CPU timeslice cutoff: 732.06 usecs.
<5>SMP motherboard not detected.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 664.9828 MHz.
<4>..... host bus clock speed is 132.9964 MHz.
<4>cpu: 0, clocks: 1329964, slice: 664982
<4>CPU0<T0:1329952,T1:664960,D:10,S:664982,C:13299 64>
<4>Waiting on wait_init_idle (map = 0x0)
<4>All processors have done init_idle
<6>ACPI: Subsystem revision 20040326
<6>ACPI: Interpreter disabled.
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
<6>PCI: Using configuration type 1
<6>PCI: Probing PCI hardware
<4>PCI: ACPI tables contain no PCI IRQ routing entries
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<6>PCI: Disabling Via external APIC routing
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Disk quotas vdquot_6.5.1
<4>pty: 256 Unix98 ptys configured
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:07.1
<6>VP_IDE: chipset revision 16
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
<6> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hdaMA, hdbMA
<6> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdcMA, hddMA
<4>hda: SAMSUNG SV0682D, ATA DISK drive
<4>hdb: QUANTUM FIREBALLlct20 10, ATA DISK drive
<4>hdc: FUJITSU MPF3102AT, ATA DISK drive
<4>hdd: CW099D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive



cont. next thread....

rck_hitokiri

<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<6>hda: 13381200 sectors (6851 MB) w/480KiB Cache, CHS=832/255/63
<4>hdb: attached ide-disk driver.
<4>hdb: host protected area => 1
<6>hdb: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=1247/255/63
<4>hdc: attached ide-disk driver.
<4>hdc: host protected area => 1
<6>hdc: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=19857/16/63
<6>Partition check:
<6> hda: hda1 hda2
<6> hdb: hdb1
<6> hdc: [PTBL] [4964/64/63] hdc1
<4>ide: late registration of driver.
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>EXT2-fs warning (device ide0(3,2)): ext2_read_super: mounting ext3 filesystem as ext2
<4>
<4>VFS: Mounted root (ext2 filesystem) readonly.
<6>Freeing unused kernel memory: 140k freed
<6>Real Time Clock Driver v1.10f
<4>hdd: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: CyberDrv Model: CW099D CD-R/RW Rev: 140M
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.12
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<6>Intel ISA PCIC probe: not found.
<6>Databook TCIC-2 PCMCIA probe: not found.
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
<6>usb-uhci.c: High bandwidth mode enabled
<6>PCI: Found IRQ 10 for device 00:07.2
<6>PCI: Sharing IRQ 10 with 00:07.3
<6>usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>PCI: Found IRQ 10 for device 00:07.3
<6>PCI: Sharing IRQ 10 with 00:07.2
<6>usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<4>usbdevfs: remount parameter error
<6>Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x77 [PCSPP,TRISTATE]
<6>parport_pc: Via 686A parallel port: io=0x378
<6>parport0: PC-style at 0x378 (0x77 [PCSPP,TRISTATE]
<6>parport_pc: Via 686A parallel port: io=0x378
<6>Via 686a/8233/8235 audio driver 1.9.1-ac3
<6>PCI: Found IRQ 5 for device 00:07.5
<7>PCI: Setting latency timer of device 00:07.5 to 64
<6>ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232)
<6>via82cxxx: board #1 at 0xDC00, IRQ 5
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 203M
<6>agpgart: Detected Via Apollo Pro chipset
<6>agpgart: AGP aperture is 64M @ 0xd8000000
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 16:01.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 16:01.
<5>NTFS driver v1.1.22 [Flags: R/W MODULE]
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:41.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:41.
<6>Adding Swap: 586332k swap-space (priority -1)
<4>cloop: Initializing cloop v2.01
<6>cloop: loaded (max 128 devices)
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
<6>hid-core.c: USB HID support drivers
<6>mice: PS/2 mouse device common for all mice
<6>cdrom: open failed.
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
/dev/hda2 on / type ext3 (rw,errors=remount-ro)
/proc on /proc type proc (rw)
/dev/pts on /dev/pts type devpts (rw)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
Filesystem Size Used Available Use% Mounted on
/dev/hda2 5.7G 162.0M 5.3G 3% /
LANG="C"
COUNTRY="us"
LANGUAGE="us"
CHARSET="iso8859-1"
KEYTABLE="us"
XKEYBOARD="us"
NETCARD_FULLNAME="Realtek|RTL-8139"
NETCARD_DRIVER="8139too"
MOUSE_FULLNAME="Generic PS/2 Wheel Mouse"
MOUSE_DEVICE="/dev/psaux"
SOUND_FULLNAME="VT82C686 [Apollo Super AC97/Audio]"
SOUND_DRIVER="via82cxxx_audio"
XSERVER="XFree86"
XMODULE="vesa"
XDESC="nVidia Corporation|unknown device 10de:0185"
root=/dev/hda2
quiet
vga=normal
noacpi
noapm
nodma
noscsi
frugal


and thats it.... hope this helps out... byt the way im usng the live cd now and i have an internet connection.... with HD install theres no eth0... only lo.