[bobescalin2005]

Hello everyone! I have a problem with my UPS (Mustek Powermust 1000) software winpower! I have installed the linux version of winpower and it should look like this. It shows only my computer name but i can`t see the information above. I am using it with the usb cable! Can you please help me to make it work? On windows works fine! Thanks!

Cheers!

[wildpossum]

You need to add more detail for anyone to assist you to get it running.
You should also read http://tldp.org/HOWTO/html_single/UPS-HOWTO/
and Linux.com :: Adding a UPS to a desktop Linux machine and do a gogle search for others.

I have looked at your vendors s/w, if your running it correctly (assuming it does indeed work) there should be a USB associated with the UPS device. Mine looks like this (run "lsusb" to get your details).
Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptable Power Supply.

Also just do "dmesg >/tmp/dmesg-output.txt" and append a copy of /tmp/dmesg-output.txt file - this will assist further.

[bobescalin2005]

Hello! I am using gnome! I have tried to install knutclient but it fails! Firts i installed Network UPS Tools (nut). It dont`t appear in lsusb (it`s only my ptrinter and my webcam).

Cheers!

[bobescalin2005]

I am sorry i didn`t see it...here is my lsusb for the UPS:

Bus 001 Device 005: ID 0665:5161

i`ve tried to configure the NUT:

driver = /usr/lib/ups/driver/megatec_usb
	port = /dev/hiddev0
	desc = "Local UPS"

and when i start the deamon:

# /etc/init.d/upsd start
Starting NUT UPS drivers                                              failed

Cheers!