billy_boy

Hello, recently i've had troubles connecting via SSH to of my servers, the error output is very weird,

[root@server1 ~]# ssh server2.name.com
Rejected
Connection to server2.name.com closed.

I can connect server1 to others of my servers and can't to others ones and i receive the same error, there are not wrappers on them, the ping is great between them, and i cant do a scp o sftp neither,however i can successfully telnet the port 22 of the target host;

[root@server1 tmp]# telnet server2 22
Trying xx.xx.xx.xx....
Connected to server2.com (xx.xx.xx.xx).
Escape character is '^]'.
SSH-1.99-OpenSSH_3.6.1p2

The sshd_config is for default there are not configs on it.

Any clue will be very very helpfully , and sorry for the continous problems

Best Regards!

smolloy

You say there are not wrappers on the server, so does that mean that this definitely isn't related to /etc/hosts.deny or /etc/hosts.allow?

Are you using a key (and are you sure you're using the right one?)?

__________________
Registered Linux user #388328 || Registered LFS user #15880
AMD 64 X2 4600+ :: 2X1GB DDR2 800 :: GeForce 9400 GT 512MB :: ASUS M2N32 Deluxe :: 4X250GB SATAII
Need instant help? Try us on IRC -- #linuxforums on freenode

billy_boy

Hello smolloy thankls for your quickly answer, exactly,not wrappers on the server means the /etc/hosts.allow/deny are empty

Im not specifing any key at the moment to do the connection, anyway i entered into the known_hosts file of the conflict server and i erased the server1 key .

But i think the problem could be a key problem because to any server i can connect they request me to do a new key.

Hope helps for the solution!.

Regards!

anomie

Short answer is: could be a number of things based on the limited info provided so far. The tcp port is obviously open to you, per your telnet test. It sounds like tcp_wrappers is also not the problem, as you say there are no rules.

ssh -vvv user@hosts

If you post the results of that, we may be able to isolate what is happening.

-------------

One a whole separate tangent, you should consider disabling SSH protocol 1 on that sshd server. There are known exploits.

billy_boy

Hello anomie, thanks for your help like always; here are the output of the command;

[root@stinger ~]# ssh -vvv root@server2.com
OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to stats.server2.com [xx.xx.xx.xx] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /root/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /root/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.6.1p2
debug1: match: OpenSSH_3.6.1p2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.9p1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 137/256
debug2: bits set: 532/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 15
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 15
debug1: Host 'server2.com' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:15
debug2: bits set: 511/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa (0x8e0711
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Offering public key: /root/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Remote: Forced command: /root/scripts/validate-rsync
debug1: Server accepts key: pkalg ssh-dss blen 433
debug2: input_userauth_pk_ok: fp ca:9d:17:7e:72:f7:51:04:14:32:b9:ed:4e:11:06:30
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type DSA
debug1: Remote: Forced command: /root/scripts/validate-rsync
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 0
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Rejected
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cfd -1)

debug3: channel 0: close_fds r -1 w -1 e 6 c -1
Connection to server2.com closed.
debug1: Transferred: stdin 0, stdout 0, stderr 40 bytes in 0.0 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 1008.7
debug1: Exit status 0

anomie

While I'm looking through this could you explain what /root/scripts/validate-rsync is? I'm trying to figure out how it fits in. (Is it run automatically via root's .profile/.bash_profile or something?)

anomie

Aha, one more thing. Can you get console access to server2 and see if PermitRootLogin is set to anything in particular (e.g. forced-commands-only) in /etc/ssh/sshd_config?

billy_boy

Hello anomei, sorry for the delay of the answer, your help was very very helpfully!

Yes the problem was in this scripts, was a script the rsync directly in a ssh connection like it shows here;

https://people.chem.umass.edu/wiki/i...utomated_Login

Is solved thanks again for your cooperation! (y)