Laserjet P1006 cant print to LTSP workstation

[lito_dec]

pls. anyone can help me setup my Laserjet P1006 printer.
senario: printer is connected to 1 thin client workstation of mandriva LTSP server.


this is my configuration through WEB browser, but the printer still no respond

HP LaserJet P1006 Foomatic/foo2xqx (recommended)
Description: Laserjet P1006
Location: 192.168.XXX.XXX
Printer State: idle, accepting jobs.
"Print file sent, waiting for printer to finish..."
Device URI: socket://hrtc001.XXXXX.com.ph:9100

[Loy Glenn]

How is the printer shared out? The line w/ your "device URI" shows the connection to be a tcp/ip connection directly to the printer (HP Jet Direct configuration-port 9100). Is this really the case?

[lito_dec]

hi, tnx for the reply, by the way, this is the configuration file
of my thin client workstation in ......./etc/lts.conf

[hrtc001]
XSERVER = VESA
X_MODE_0 = 800x600 40 800 840 968 1056 600 601 605 628 +hsync +vsync
X_MOUSE_BAUD = 1200
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_BUTTONS = 2
MODULE_01 = usb-uchi
MODULE_02 = printer
PRINTER_0_DEVICE = /dev/usb/lp0
PRINTER_0_TYPE = U

the printer is connected to 1 usb port of my thin client workstation.

[Loy Glenn]

Are you attempting to print directly from the computer that the printer is attached to or a remote computer?

[lito_dec]

yes, from the computer that the printer is attached
(computer is a thin client workstation of LTSP)

[Loy Glenn]

Can you tell if anything is in the print que after initiating a print job?