Results 11 to 17 of 17
Code:
su -
ifconfig eth0 up
dhclient eth0...
- 03-09-2005 #11Code:
su - ifconfig eth0 up dhclient eth0
- 03-09-2005 #12Just Joined!
- Join Date
- Mar 2005
- Location
- Champaign, IL
- Posts
- 6
Latest attempt;
su -
ifconfig eth0 up
SIOCSIFFLAGS: Function not implemented
dhclient eth0
sit0: unknown hardware address type 776
SIOCSIFFLAGS: Function not implemented
SIOCSIFFLAGS: Function not implemented
sit0: unknown hardware address type 776
Listening on LPF/eth0/00:40:2b:4b:25:e2
Sending on LPF/eth0/00:40:2b:4b:25:e2
Sending on socket/ fallback
recieve_packet failed on eth0: Network is down
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
send_packet: Network is down
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
send_packet: Network is down
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
send_packet: Network is down
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
send_packet: Network is down
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
send_packet: Network is down
No DHCPDISCOVER recieved.
No working leases in persistent database -sleeping
Ok well that's the output for both commands. I'm only still online because of Knoppix Live run.
Thanks y'all
- 03-09-2005 #13
sounds like there might be some required firmware for that driver or something like that.
- 03-10-2005 #14Just Joined!
- Join Date
- Mar 2005
- Location
- Champaign, IL
- Posts
- 6
What can I do?
- 03-14-2005 #15Just Joined!
- Join Date
- Mar 2005
- Posts
- 19
ethernet not initialized at boot in Mandrake 10.1
Sorry to add a post in this thread, but I have exactly the same problem. Please see my post.
http://www.linuxforums.org/forum/top...light=ethernet
If you could help me will be nice of you.
- 03-27-2005 #16Just Joined!
- Join Date
- Mar 2005
- Posts
- 6
Are you using your modem on any other computer? If so, what operating system is it?
- 03-27-2005 #17Just Joined!
- Join Date
- Mar 2005
- Posts
- 26
sry i dont know if i can helpo but ...
my 2 pcmcia cards always had toruble accesssing the web.. but what i did was :-
after installing mandrake
and ten the cards refused to see the web
i just unplugged the card and replugged it back in
then ran "lynx www.google.com"
and everything would be fine.....
something about the weird pcmcia drivers anyway
idk if that helps


Reply With Quote
