Printable View
I'm trying to install Mandrake 10.1
After choosing the language I get the following message and can't do nothing:
"Intel Corp.182801 FR/FRW (ICH6R/ICH6RW) sata controller" , "parport_pc" , "imm" , "ppa" interfaces
That doesn't tell me much, except there seems to be a pb with my SATA Drive.
It seems to be a frequent issue given what I read on other websites, though I couldn't find any usefull information.
Any help appreciated. Thx a lot.
Hi,
I have the same problem with the 64 bit version of Mandrake 10.1. Mandrake advised me to install on a IDE drive which I did and that worked ok. Only problem is now I can not access my SATA drives with other OS. Seems to be an issue with the sata_nv module on this compile because the 32 bit version worked fine. If anyone can offer some suggestions I,d reallly appreciate it; haven found any solutions after weeks of looking. If it helps here is an extract from /var/log/dmesg
++++++++++++++++++++++++++++++++++
SCSI subsystem initialized
libata version 1.02 loaded.
sata_nv version 0.03
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC000 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC008 irq 11
nv_sata: Primary device added
ata1 is slow to respond, please be patient
ata1 failed to respond (30 secs)
scsi0 : sata_nv
nv_sata: Secondary device added
ata2 is slow to respond, please be patient
ata2 failed to respond (30 secs)
scsi1 : sata_nv
+++++++++++++++++++++++++++++
Cheers