Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
i didn't pay attention when i was loading linux as a dual boot deal, and after messing things up pretty bad i decided a linux only machine would be nice ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20

    [SOLVED] can't find the pci id


    i didn't pay attention when i was loading linux as a dual boot deal, and after messing things up pretty bad i decided a linux only machine would be nice so i moved the partition all the way over and lost access to or all the windows files so now i wonder how to get the wireless driver working again as i cant find anything i tried "sudo-ndiswrapper" and added the"-l" but cant find any files so where do i go from here?

  2. #2
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20
    also when i type pci id in the terminal i get "bad comand " or something of that sort

  3. #3
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Pci is not a command.
    lspci will show you the pci-ids.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  4. $spacer_open
    $spacer_close
  5. #4
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    One of these two will give you pciids
    Code:
    lspci -vnn
    lspci -knn
    Depending on the distro/version of pciutils, one the other or both will work.

    To narrow it down to just the network cards, this will work most of the time
    Code:
    lspci -vnn | grep -a4 -i net

  6. #5
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20
    lspci -vnn | grep -a4 -i net yields this:



    Code:
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ lspci -vnn | grep -a4 -i net
    	Capabilities: <access denied>
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    
    00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 42
    	Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
    	I/O ports at 30f8 [size=8]
    --
    	Capabilities: <access denied>
    	Kernel driver in use: nvidia
    	Kernel modules: nvidia-173, nouveau, nvidiafb
    
    07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:137a]
    	Flags: bus master, fast devsel, latency 0, IRQ 23
    	Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
    	Capabilities: <access denied>


    I was trying to get my wireless running, do you see anything that will help me?
    Last edited by oz; 03-29-2011 at 03:59 PM. Reason: inserted code tags

  7. #6
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20

    here is some more info that may help it's the dmesg report

    Code:
    [    0.176124] ACPI: Interpreter enabled
    [    0.176128] ACPI: (supports S0 S3 S4 S5)
    [    0.176149] ACPI: Using IOAPIC for interrupt routing
    [    0.198595] ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
    [    0.200199] ACPI: No dock devices found.
    [    0.200204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.200550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.200994] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.200997] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.201001] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.201004] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    [    0.201007] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    [    0.201011] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    [    0.201015] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce1ff]
    [    0.201019] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [    0.201022] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [    0.201025] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [    0.201029] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [    0.201032] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [    0.201035] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [    0.201038] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    [    0.201041] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    [    0.201044] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
    [    0.201048] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    [    0.201301] pci 0000:00:01.0: reg 10: [io  0x1a00-0x1aff]
    [    0.201353] pci 0000:00:01.1: reg 10: [io  0x3080-0x30bf]
    [    0.201369] pci 0000:00:01.1: reg 20: [io  0x3040-0x307f]
    [    0.201375] pci 0000:00:01.1: reg 24: [io  0x3000-0x303f]
    [    0.201401] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [    0.201408] pci 0000:00:01.1: PME# disabled
    [    0.201442] pci 0000:00:01.3: reg 10: [mem 0xc0080000-0xc00fffff]
    [    0.201596] pci 0000:00:02.0: reg 10: [mem 0xc0006000-0xc0006fff]
    [    0.201632] pci 0000:00:02.0: supports D1 D2
    [    0.201634] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.201638] pci 0000:00:02.0: PME# disabled
    [    0.201667] pci 0000:00:02.1: reg 10: [mem 0xc0007000-0xc00070ff]
    [    0.201709] pci 0000:00:02.1: supports D1 D2
    [    0.201711] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.201716] pci 0000:00:02.1: PME# disabled
    [    0.201750] pci 0000:00:04.0: reg 10: [mem 0xc0008000-0xc0008fff]
    [    0.201786] pci 0000:00:04.0: supports D1 D2
    [    0.201788] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.201793] pci 0000:00:04.0: PME# disabled
    [    0.201821] pci 0000:00:04.1: reg 10: [mem 0xc0007400-0xc00074ff]
    [    0.201863] pci 0000:00:04.1: supports D1 D2
    [    0.201865] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.201870] pci 0000:00:04.1: PME# disabled
    [    0.201917] pci 0000:00:06.0: reg 20: [io  0x30c0-0x30cf]
    [    0.201969] pci 0000:00:07.0: reg 10: [mem 0xc0000000-0xc0003fff]
    [    0.202011] pci 0000:00:07.0: PME# supported from D3hot D3cold
    [    0.202015] pci 0000:00:07.0: PME# disabled
    [    0.202097] pci 0000:00:09.0: reg 10: [io  0x30f0-0x30f7]
    [    0.202102] pci 0000:00:09.0: reg 14: [io  0x30e4-0x30e7]
    [    0.202108] pci 0000:00:09.0: reg 18: [io  0x30e8-0x30ef]
    [    0.202113] pci 0000:00:09.0: reg 1c: [io  0x30e0-0x30e3]
    [    0.202119] pci 0000:00:09.0: reg 20: [io  0x30d0-0x30df]
    [    0.202125] pci 0000:00:09.0: reg 24: [mem 0xc0004000-0xc0005fff]
    [    0.202181] pci 0000:00:0a.0: reg 10: [mem 0xc0009000-0xc0009fff]
    [    0.202186] pci 0000:00:0a.0: reg 14: [io  0x30f8-0x30ff]
    [    0.202192] pci 0000:00:0a.0: reg 18: [mem 0xc0007c00-0xc0007cff]
    [    0.202198] pci 0000:00:0a.0: reg 1c: [mem 0xc0007800-0xc000780f]
    [    0.202229] pci 0000:00:0a.0: supports D1 D2
    [    0.202232] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.202237] pci 0000:00:0a.0: PME# disabled
    [    0.202291] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.202295] pci 0000:00:0b.0: PME# disabled
    [    0.202523] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.202532] pci 0000:00:14.0: PME# disabled
    [    0.202795] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
    [    0.202801] pci 0000:00:08.0:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.202806] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.202811] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.202814] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.202817] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.202820] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.202824] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [    0.202827] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [    0.202830] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [    0.202833] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [    0.202836] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [    0.202839] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [    0.202843] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [    0.202846] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [    0.202849] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [    0.202852] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [    0.202855] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [    0.202858] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    [    0.202862] pci 0000:00:08.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    [    0.202908] pci 0000:02:00.0: reg 10: [mem 0xc1000000-0xc1ffffff]
    [    0.202917] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.202926] pci 0000:02:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit pref]
    [    0.202932] pci 0000:02:00.0: reg 24: [io  0x4000-0x407f]
    [    0.202938] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.202981] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
    [    0.202986] pci 0000:00:0b.0:   bridge window [io  0x4000-0x4fff]
    [    0.202991] pci 0000:00:0b.0:   bridge window [mem 0xc1000000-0xc1ffffff]
    [    0.202996] pci 0000:00:0b.0:   bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
    [    0.203196] pci 0000:07:00.0: reg 10: [mem 0xc2000000-0xc200ffff 64bit]
    [    0.203276] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    0.203292] pci 0000:00:14.0: PCI bridge to [bus 07-07]
    [    0.203307] pci 0000:00:14.0:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.203316] pci 0000:00:14.0:   bridge window [mem 0xc2000000-0xc20fffff]
    [    0.203332] pci 0000:00:14.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.203356] pci_bus 0000:00: on NUMA node 0
    [    0.203361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.203476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    [    0.203577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    [    0.225628] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
    [    0.225804] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
    [    0.225977] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    [    0.226150] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    [    0.226324] ACPI: PCI Interrupt Link [Z012] (IRQs 19 20 21 22 23) *10
    [    0.226497] ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0, disabled.
    [    0.226670] ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0, disabled.
    [    0.226843] ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0, disabled.
    [    0.227017] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
    [    0.227186] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
    [    0.227357] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
    [    0.227535] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
    [    0.227707] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
    [    0.227880] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
    [    0.228066] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
    [    0.228239] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11
    [    0.228410] ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0, disabled.
    [    0.228583] ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5
    [    0.228760] ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10
    [    0.228930] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
    [    0.228969] HEST: Table is not found!
    [    0.229073] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.229076] vgaarb: loaded
    [    0.229261] SCSI subsystem initialized
    [    0.229356] libata version 3.00 loaded.
    [    0.229415] usbcore: registered new interface driver usbfs
    [    0.229430] usbcore: registered new interface driver hub
    [    0.229456] usbcore: registered new device driver usb
    [    0.229731] ACPI: WMI: Mapper loaded
    [    0.229734] PCI: Using ACPI for IRQ routing
    [    0.229738] PCI: pci_cache_line_size set to 64 bytes
    [    0.229834] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
    [    0.229837] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
    [    0.229840] reserve RAM buffer: 00000000afed0000 - 00000000afffffff 
    [    0.229942] NetLabel: Initializing
    [    0.229945] NetLabel:  domain hash size = 128
    [    0.229946] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.229962] NetLabel:  unlabeled traffic allowed by default
    [    0.230000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.230008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
    [    0.230014] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [    0.240028] Switching to clocksource hpet
    [    0.250444] AppArmor: AppArmor Filesystem Enabled
    [    0.250465] pnp: PnP ACPI init
    [    0.250488] ACPI: bus type pnp registered
    [    0.256248] pnp: PnP ACPI: found 12 devices
    [    0.256251] ACPI: ACPI bus type pnp unregistered
    [    0.256254] PnPBIOS: Disabled by ACPI PNP
    [    0.256271] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.256277] system 00:03: [io  0x0360-0x0361] has been reserved
    [    0.256281] system 00:03: [io  0x04d0-0x04d1] has been reserved
    [    0.256285] system 00:03: [mem 0xff800000-0xff800fff] has been reserved
    [    0.256292] system 00:0a: [io  0x1000-0x107f] has been reserved
    [    0.256295] system 00:0a: [io  0x1080-0x10ff] has been reserved
    [    0.256298] system 00:0a: [io  0x1200-0x127f] has been reserved
    [    0.256301] system 00:0a: [io  0x1280-0x12ff] has been reserved
    [    0.256305] system 00:0a: [io  0x1400-0x147f] has been reserved
    [    0.256308] system 00:0a: [io  0x1480-0x14ff] has been reserved
    [    0.256314] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved
    [    0.256318] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.256321] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    0.256325] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved
    [    0.256328] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved
    [    0.292470] pci 0000:00:08.0: PCI bridge to [bus 01-01]
    [    0.292473] pci 0000:00:08.0:   bridge window [io  disabled]
    [    0.292478] pci 0000:00:08.0:   bridge window [mem disabled]
    [    0.292482] pci 0000:00:08.0:   bridge window [mem pref disabled]
    [    0.292492] pci 0000:02:00.0: BAR 6: assigned [mem 0xc6000000-0xc601ffff pref]
    [    0.292496] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
    [    0.292499] pci 0000:00:0b.0:   bridge window [io  0x4000-0x4fff]
    [    0.292504] pci 0000:00:0b.0:   bridge window [mem 0xc1000000-0xc1ffffff]
    [    0.292508] pci 0000:00:0b.0:   bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
    [    0.292742] pci 0000:00:14.0: PCI bridge to [bus 07-07]
    [    0.292744] pci 0000:00:14.0:   bridge window [io  disabled]
    [    0.292755] pci 0000:00:14.0:   bridge window [mem 0xc2000000-0xc20fffff]
    [    0.292763] pci 0000:00:14.0:   bridge window [mem pref disabled]
    [    0.292785] pci 0000:00:08.0: setting latency timer to 64
    [    0.292794] pci 0000:00:0b.0: setting latency timer to 64
    [    0.293112] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23
    [    0.293117]   alloc irq_desc for 23 on node -1
    [    0.293119]   alloc kstat_irqs on node -1
    [    0.293130] pci 0000:00:14.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
    [    0.293140] pci 0000:00:14.0: setting latency timer to 64
    [    0.293147] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.293150] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.293153] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.293156] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [    0.293159] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [    0.293161] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [    0.293164] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [    0.293167] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [    0.293170] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [    0.293173] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [    0.293176] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [    0.293179] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [    0.293182] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [    0.293185] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [    0.293188] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
    [    0.293191] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
    [    0.293194] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
    [    0.293197] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
    [    0.293200] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.293202] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
    [    0.293205] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
    [    0.293208] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
    [    0.293211] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
    [    0.293214] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
    [    0.293217] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
    [    0.293220] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
    [    0.293223] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
    [    0.293226] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
    [    0.293229] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
    [    0.293232] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
    [    0.293234] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff]
    [    0.293237] pci_bus 0000:01: resource 19 [mem 0xc0000000-0xfebfffff]
    [    0.293240] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
    [    0.293243] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc1ffffff]
    [    0.293246] pci_bus 0000:02: resource 2 [mem 0xc4000000-0xdfffffff 64bit pref]
    [    0.293250] pci_bus 0000:07: resource 1 [mem 0xc2000000-0xc20fffff]
    [    0.293296] NET: Registered protocol family 2
    [    0.293366] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.293666] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.294365] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.294688] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.294691] TCP reno registered
    [    0.294694] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.294707] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.294816] NET: Registered protocol family 1
    [    0.295091] pci 0000:00:07.0: Enabling HT MSI Mapping
    [    0.295217] pci 0000:00:08.0: Enabling HT MSI Mapping
    [    0.295355] pci 0000:00:09.0: Enabling HT MSI Mapping
    [    0.295500] pci 0000:00:0a.0: Enabling HT MSI Mapping
    [    0.295647] pci 0000:00:0b.0: Enabling HT MSI Mapping
    [    0.295732] pci 0000:02:00.0: Boot video device
    [    0.295739] PCI: CLS 0 bytes, default 64
    [    0.295773] Simple Boot Flag at 0x38 set to 0x1
    [    0.295983] cpufreq-nforce2: No nForce2 chipset.
    [    0.296018] Scanning for low memory corruption every 60 seconds
    [    0.296187] audit: initializing netlink socket (disabled)
    [    0.296198] type=2000 audit(1301326983.296:1): initialized
    [    0.307721] highmem bounce pool size: 64 pages
    [    0.307727] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.309238] VFS: Disk quotas dquot_6.5.2
    [    0.309300] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.309924] fuse init (API version 7.14)
    [    0.310019] msgmni has been set to 1653
    [    0.310340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.310344] io scheduler noop registered
    [    0.310346] io scheduler deadline registered
    [    0.310360] io scheduler cfq registered (default)
    [    0.310510] pcieport 0000:00:14.0: setting latency timer to 64
    [    0.310636]   alloc irq_desc for 40 on node -1
    [    0.310639]   alloc kstat_irqs on node -1
    [    0.310661] pcieport 0000:00:14.0: irq 40 for MSI/MSI-X
    [    0.310826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.310851] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.312237] ACPI: AC Adapter [ADP1] (off-line)
    [    0.312308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [    0.313381] ACPI: Lid Switch [LID0]
    [    0.313428] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [    0.313434] ACPI: Sleep Button [SLPB]
    [    0.313492] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [    0.313496] ACPI: Power Button [PWRB]
    [    0.313540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    0.313544] ACPI: Power Button [PWRF]
    [    0.313762] ACPI: acpi_idle registered with cpuidle
    [    0.336554] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.336562] ACPI: Thermal Zone [TZS0] (37 C)
    [    0.343605] thermal LNXTHERM:02: registered as thermal_zone1
    [    0.343612] ACPI: Thermal Zone [TZS1] (38 C)
    [    0.343695] ERST: Table is not found!
    [    0.343993] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.345456] brd: module loaded
    [    0.345998] loop: module loaded
    [    0.346296] pata_acpi 0000:00:06.0: setting latency timer to 64
    [    0.346637] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
    [    0.346643]   alloc irq_desc for 22 on node -1
    [    0.346646]   alloc kstat_irqs on node -1
    [    0.346659] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
    [    0.346677] pata_acpi 0000:00:09.0: setting latency timer to 64
    [    0.346686] pata_acpi 0000:00:09.0: PCI INT A disabled
    [    0.347057] Fixed MDIO Bus: probed
    [    0.347098] PPP generic driver version 2.4.2
    [    0.347139] tun: Universal TUN/TAP device driver, 1.6
    [    0.347142] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.347231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.347514] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
    [    0.347517]   alloc irq_desc for 17 on node -1
    [    0.347519]   alloc kstat_irqs on node -1
    [    0.347528] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
    [    0.347551] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    0.347555] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    0.347593] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    [    0.347622] ehci_hcd 0000:00:02.1: debug port 1
    [    0.347632] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    [    0.347658] ehci_hcd 0000:00:02.1: irq 17, io mem 0xc0007000
    [    0.347781] isapnp: Scanning for PnP cards...
    [    0.396890] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [    0.397040] hub 1-0:1.0: USB hub found
    [    0.397046] hub 1-0:1.0: 3 ports detected
    [    0.397432] ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
    [    0.397436]   alloc irq_desc for 16 on node -1
    [    0.397438]   alloc kstat_irqs on node -1
    [    0.397447] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
    [    0.397462] ehci_hcd 0000:00:04.1: setting latency timer to 64
    [    0.397465] ehci_hcd 0000:00:04.1: EHCI Host Controller
    [    0.397568] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    [    0.397594] ehci_hcd 0000:00:04.1: debug port 1
    [    0.397603] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    [    0.397625] ehci_hcd 0000:00:04.1: irq 16, io mem 0xc0007400
    [    0.412057] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    [    0.412241] hub 2-0:1.0: USB hub found
    [    0.412247] hub 2-0:1.0: 4 ports detected
    [    0.412340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.412723] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
    [    0.412729] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
    [    0.412754] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    0.412758] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    0.412804] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
    [    0.412824] ohci_hcd 0000:00:02.0: irq 17, io mem 0xc0006000
    [    0.470316] hub 3-0:1.0: USB hub found
    [    0.470325] hub 3-0:1.0: 3 ports detected
    [    0.470763] ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
    [    0.470769] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
    [    0.470793] ohci_hcd 0000:00:04.0: setting latency timer to 64
    [    0.470796] ohci_hcd 0000:00:04.0: OHCI Host Controller
    [    0.470844] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
    [    0.470866] ohci_hcd 0000:00:04.0: irq 16, io mem 0xc0008000
    [    0.526306] hub 4-0:1.0: USB hub found
    [    0.526315] hub 4-0:1.0: 4 ports detected
    [    0.526401] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.526516] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    0.541834] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    0.568956] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.576410] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    0.576417] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    0.576421] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    0.576425] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    0.576547] mice: PS/2 mouse device common for all mice
    [    0.576739] rtc_cmos 00:06: RTC can wake from S4
    [    0.576784] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [    0.576847] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    [    0.576973] device-mapper: uevent: version 1.0.3
    [    0.584425] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
    [    0.643440] Freeing initrd memory: 15816k freed
    [    0.658665] device-mapper: multipath: version 1.1.1 loaded
    [    0.658670] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    0.658865] EISA: Probing bus 0 at eisa.0
    [    0.658869] EISA: Cannot allocate resource for mainboard
    [    0.658872] Cannot allocate resource for EISA slot 1
    [    0.658875] Cannot allocate resource for EISA slot 2
    [    0.658877] Cannot allocate resource for EISA slot 3
    [    0.658880] Cannot allocate resource for EISA slot 4
    [    0.658882] Cannot allocate resource for EISA slot 5
    [    0.658885] Cannot allocate resource for EISA slot 6
    [    0.658888] Cannot allocate resource for EISA slot 7
    [    0.658890] Cannot allocate resource for EISA slot 8
    [    0.658892] EISA: Detected 0 cards.
    [    0.658986] cpuidle: using governor ladder
    [    0.658989] cpuidle: using governor menu
    [    0.659323] TCP cubic registered
    [    0.659458] NET: Registered protocol family 10
    [    0.659899] lo: Disabled Privacy Extensions
    [    0.660209] NET: Registered protocol family 17
    [    0.660252] powernow-k8: Found 1 AMD Athlon Dual-Core QL-62 (2 cpu cores) (version 2.20.00)
    [    0.660347] powernow-k8:    0 : pstate 0 (2000 MHz)
    [    0.660350] powernow-k8:    1 : pstate 1 (1000 MHz)
    [    0.677481] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    0.702279] isapnp: No Plug & Play device found
    [    0.702455] Using IPI No-Shortcut mode
    [    0.702551] PM: Resume from disk failed.
    [    0.702566] registered taskstats version 1
    [    0.702887]   Magic number: 3:361:741
    [    0.703031] rtc_cmos 00:06: setting system clock to 2011-03-28 15:43:04 UTC (1301326984)
    [    0.703035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.703037] EDD information not available.
    [    0.703133] Freeing unused kernel memory: 684k freed
    [    0.703655] Write protecting the kernel text: 4932k
    [    0.703698] Write protecting the kernel read-only data: 1976k
    [    0.726656] udev[78]: starting version 163
    [    0.769056] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [    0.863338] pata_amd 0000:00:06.0: version 0.4.1
    [    0.863393] pata_amd 0000:00:06.0: setting latency timer to 64
    [    0.873625] scsi0 : pata_amd
    [    0.873940] scsi1 : pata_amd
    [    0.873987] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
    [    0.874664] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
    [    0.875309] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [    0.875659] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
    [    0.875665]   alloc irq_desc for 21 on node -1
    [    0.875668]   alloc kstat_irqs on node -1
    [    0.875681] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
    [    0.875687] forcedeth 0000:00:0a.0: setting latency timer to 64
    [    1.028368] ata2: port disabled. ignoring.
    [    1.216703] Initializing USB Mass Storage driver...
    [    1.216855] scsi2 : usb-storage 1-1:1.0
    [    1.216964] usbcore: registered new interface driver usb-storage
    [    1.216967] USB Mass Storage support registered.
    [    1.397177] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:7b:9b:07
    [    1.397182] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
    [    1.397213] ahci 0000:00:09.0: version 3.0
    [    1.397232] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
    [    1.397290]   alloc irq_desc for 41 on node -1
    [    1.397293]   alloc kstat_irqs on node -1
    [    1.397305] ahci 0000:00:09.0: irq 41 for MSI/MSI-X
    [    1.397314] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
    [    1.397361] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
    [    1.397366] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part boh 
    [    1.397372] ahci 0000:00:09.0: setting latency timer to 64
    [    1.397689] scsi3 : ahci
    [    1.397797] scsi4 : ahci
    [    1.397898] ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 41
    [    1.397902] ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 41
    [    1.487237] ACPI: Battery Slot [BAT0] (battery present)
    [    1.494460] acpi device:0b: registered as cooling_device2
    [    1.494717] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input5
    [    1.494781] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [    1.716573] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.716594] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.718493] ata4.00: ATA-8: ST9250320AS, HP07, max UDMA/100
    [    1.718496] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.721040] ata4.00: configured for UDMA/100
    [    1.735761] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
    [    1.757466] ata3.00: configured for UDMA/100
    [    1.766493] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633M  0200 PQ: 0 ANSI: 5
    [    1.783119] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.783123] Uniform CD-ROM driver Revision: 3.20
    [    1.783254] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [    1.783328] sr 3:0:0:0: Attached scsi generic sg0 type 5
    [    1.783560] scsi 4:0:0:0: Direct-Access     ATA      ST9250320AS      HP07 PQ: 0 ANSI: 5
    [    1.783717] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [    1.783765] sd 4:0:0:0: Attached scsi generic sg1 type 0
    [    1.783869] sd 4:0:0:0: [sda] Write Protect is off
    [    1.783873] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.783920] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.784185]  sda: sda1 sda2 < sda5 >
    [    1.837158] sd 4:0:0:0: [sda] Attached SCSI disk
    [    2.215478] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
    [    2.216217] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [    2.220462] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    2.479036] Btrfs loaded
    [    2.485732] xor: automatically using best checksumming function: pIII_sse
    [    2.504009]    pIII_sse  :  6048.000 MB/sec
    [    2.504012] xor: using function: pIII_sse (6048.000 MB/sec)
    [    2.507043] device-mapper: dm-raid45: initialized v0.2594b
    [    2.883156] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   16.952700] udev[436]: starting version 163
    [   16.997907] lp: driver loaded but no devices found
    [   17.088418] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   17.122193] i2c i2c-0: nForce2 SMBus adapter at 0x3040
    [   17.122222] i2c i2c-1: nForce2 SMBus adapter at 0x3000
    [   17.252607] Linux agpgart interface v0.103
    [   17.315536] input: HP WMI hotkeys as /devices/virtual/input/input6
    [   17.350495] cfg80211: Calling CRDA to update world regulatory domain
    [   17.389357] nvidia: module license 'NVIDIA' taints kernel.
    [   17.389362] Disabling lock debugging due to kernel taint
    [   17.433042] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
    [   17.433056] ath5k 0000:07:00.0: setting latency timer to 64
    [   17.433110] ath5k 0000:07:00.0: registered as 'phy0'
    [   17.782353] cfg80211: World regulatory domain updated:
    [   17.782358]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   17.782362]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.782365]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   17.782368]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   17.782371]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.782374]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.827904] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   17.976034] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
    [   17.976042]   alloc irq_desc for 20 on node -1
    [   17.976045]   alloc kstat_irqs on node -1
    [   17.976058] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
    [   17.976063] hda_intel: Disable MSI for Nvidia chipset
    [   17.976118] HDA Intel 0000:00:07.0: setting latency timer to 64
    [   18.136443] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 19
    [   18.136452]   alloc irq_desc for 19 on node -1
    [   18.136454]   alloc kstat_irqs on node -1
    [   18.136469] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 19 (level, low) -> IRQ 19
    [   18.136479] nvidia 0000:02:00.0: setting latency timer to 64
    [   18.136485] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [   18.137733] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.28  Wed Sep 29 09:47:25 PDT 2010
    [   18.183024] ath: EEPROM regdomain: 0x64
    [   18.183028] ath: EEPROM indicates we should expect a direct regpair map
    [   18.183033] ath: Country alpha2 being used: 00
    [   18.183035] ath: Regpair used: 0x64
    [   18.193788] phy0: Selected rate control algorithm 'minstrel'
    [   18.194504] Registered led device: ath5k-phy0::rx
    [   18.194526] Registered led device: ath5k-phy0::tx
    [   18.194531] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    [   18.409319] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000
    [   18.476571] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
    [   18.479524]   alloc irq_desc for 42 on node -1
    [   18.479530]   alloc kstat_irqs on node -1
    [   18.479543] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
    [   18.752160] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
    [   18.752274] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
    [   18.752358] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
    [   18.888122] ppdev: user-space parallel port driver
    [   22.888587] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
    [   27.631562] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
    [   28.564020] eth0: no IPv6 routers present
    [   50.057194] lo: Disabled Privacy Extensions
    [   51.459356] lo: Disabled Privacy Extensions
    [  292.943619] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [  751.451769] lo: Disabled Privacy Extensions
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $
    Last edited by oz; 03-29-2011 at 04:00 PM. Reason: inserted code tags

  8. #7
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20

    code from my laptop lspci -knn

    Code:
    lspci -knn 
    00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: nForce2_smbus
    	Kernel modules: i2c-nforce2
    00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: ohci_hcd
    00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: ehci_hcd
    00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: ohci_hcd
    00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: ehci_hcd
    00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: pata_amd
    	Kernel modules: pata_amd
    00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
    00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: forcedeth
    	Kernel modules: forcedeth
    00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
    	Kernel modules: shpchp
    00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
    	Kernel driver in use: k10temp
    	Kernel modules: k10temp
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
    02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200M G] [10de:0845] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Kernel driver in use: nvidia
    	Kernel modules: nvidia-173, nouveau, nvidiafb
    07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:137a]
    	Kernel driver in use: ath5k
    	Kernel modules: ath5k
    Last edited by oz; 03-29-2011 at 04:01 PM. Reason: inserted code tags

  9. #8
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20
    i hope i did not over do it here but i really want to get my wireless going and i thought that this info would help in getting some direction.Thanks to any and all who reply.

  10. #9
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    First, code tags make long output much much easier to read.

    This is your wireless
    Code:
    07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:137a]
    Flags: bus master, fast devsel, latency 0, IRQ 23
    Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    PCI ID is 168c:001c.

    It's currently using the ath5k driver, which is correct.

    What is the output of
    Code:
    lsmod
    Also try
    Code:
    sudo ifconfig wlan0 up
    sudo iwlist wlan0 scan
    Does that return an error or show available networks?

  11. #10
    Just Joined!
    Join Date
    Mar 2011
    Posts
    20

    I'm having the same problem here is what i get

    Code:
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ lspci -vnn | grep -a4 -i net
    	Capabilities: <access denied>
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    
    00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
    	Subsystem: Hewlett-Packard Company Device [103c:360a]
    	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 42
    	Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
    	I/O ports at 30f8 [size=8]
    --
    	Capabilities: <access denied>
    	Kernel driver in use: nvidia
    	Kernel modules: nvidia-173, nouveau, nvidiafb
    
    07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:137a]
    	Flags: bus master, fast devsel, latency 0, IRQ 23
    	Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
    	Capabilities: <access denied>
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ sudo modprobe 0r -f ath5k
    [sudo] password for curtis: 
    FATAL: Module 0r not found.
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ sudo modprobe ath5k
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ sudo modprobe -r -f ath5k
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $ modprobe ath5k
    WARNING: Error inserting cfg80211 (/lib/modules/2.6.35-22-generic/kernel/net/wireless/cfg80211.ko): Operation not permitted
    WARNING: Error inserting ath (/lib/modules/2.6.35-22-generic/kernel/drivers/net/wireless/ath/ath.ko): Operation not permitted
    WARNING: Error inserting mac80211 (/lib/modules/2.6.35-22-generic/kernel/net/mac80211/mac80211.ko): Operation not permitted
    FATAL: Error inserting ath5k (/lib/modules/2.6.35-22-generic/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko): Operation not permitted
    curtis@curtis-Compaq-Presario-CQ60-Notebook-PC ~ $
    Last edited by oz; 03-29-2011 at 04:01 PM. Reason: inserted code tags

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •