Results 1 to 2 of 2
hey I am shemul. from Bangladesh. I am new in Linux. I have installed Linux Mint Julia. But i can not hear sound, although the video and audio are playing ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 04-24-2011 #1
- Join Date
- Apr 2011
No sound in linux mint julia, please help...
I have installed sysinfo it shows the following information--
Intel corporation N10/ICH7 Family high definition audio controller (rev 01)
Subsystem: Giga-byte technology device a002
When i am in windows 7, i have installed windows 7 manager, it shows the following information about sound card--
Sound Card Realtek High Definition Audio
DeviceID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_1458A002& REV_1003\4&2F790C35&0&0201
Please help me, i am now burning. i have to use windows for sound. no problem in windows, although at first my sound dont come simultaneously infront & back . after installing the latest version of realtek it is ok .
so what i have to do now? please help me. anyhing you want to know just ask, i am new in linux. thanks
- 04-24-2011 #2
- Join Date
- Apr 2011
shemul@shemul-G41MT-D3 ~ $ hwinfo --sound
10: PCI 1b.0: 0403 Audio device
[Created at pci.318]
Unique ID: u1Nb.NJUir9jiH51
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xa002
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfdff8000-0xfdffbfff (rw,non-prefetchable)
IRQ: 44 (3777 events)
Module Alias: "pci:v00008086d000027D8sv00001458sd0000A002bc04sc0 3i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
shemul@shemul-G41MT-D3 ~ $ lspci output
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file