Find the answer to your Linux question:
Results 1 to 10 of 10
I already posted this question in the newbies section of this forum and also at Linux Mint forums but after more than a week I didn't get any answer so ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9

    "UPnP error" while starting the system


    I already posted this question in the newbies section of this forum and also at Linux Mint forums but after more than a week I didn't get any answer so I might have posted it in the wrong place. Hopefully this will be more suitable.

    During the system (LMDE 64 bit) starting process the following error appears on the screen:

    Starting UPnP devices daemon: MiniSSDPdstart-stop-daemon: unable to stat /usr/sbin/minissdpd (No such file or directory)

    and after that you can read failed! in bright red. Then the system enters prompt mode. I tried also with two older kernels and the same happened.

    Any ideas on what is all this about and how to solve the issue?

    Thanks in advance.

  2. #2
    Linux Guru
    Join Date
    Oct 2007
    Location
    Tucson AZ
    Posts
    3,190
    Is this a new installation of Mint? or is this a new problem with a previously functioning Mint install?

    Then the system enters prompt mode
    Have you checked at this point to see if that file does exist?
    ls -l /usr/sbin/minissdpd

  3. #3
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    In the command line I typed apt-get install minissdpd, the package was installed and now the file is there. This made the error and the failed! part not appear any more but the system enters prompt mode anyway after this step. I believe some comments are in order:

    1) This is definitely not a new installation. I had it running for 9-10 months with no major problems.

    2) To install the package I had to do it as superuser (su). The usual sudo apt-get install minissdpd did not work because apparently ldconfig and start-stop-daemon were "not found in PATH or not executable". I have no clue about this difference.

    3) There's no way to update the system, even as superuser: the command apt-get update fails.

    Thanks for your help

  4. $spacer_open
    $spacer_close
  5. #4
    Penguin of trust elija's Avatar
    Join Date
    Jul 2004
    Location
    Either at home or at work or down the pub
    Posts
    3,638
    When you run ls -l /usr/sbin/minissdpd what are the permissions?
    "I used to be with it, then they changed what it was.
    Now what was it isn't it, and what is it is weird and scary to me.
    It'll happen to you too."

    Grandpa Simpson



    The Fifth Continent

  6. #5
    Linux Guru
    Join Date
    Oct 2007
    Location
    Tucson AZ
    Posts
    3,190
    Which release of Linux Mint are you using, Mint 11? Earlier version? How did you install the package and where did you get it? From its' site, from the Mint repositories?

  7. #6
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    Quote Originally Posted by elija View Post
    When you run ls -l /usr/sbin/minissdpd what are the permissions?
    755


    Quote Originally Posted by yancek View Post
    Which release of Linux Mint are you using, Mint 11? Earlier version? How did you install the package and where did you get it? From its' site, from the Mint repositories?
    I'm using Debian Edition. I installed the package by using sudo apt-get install minissdpd, so I guess it was in the repositories already.

  8. #7
    Linux Guru
    Join Date
    Oct 2007
    Location
    Tucson AZ
    Posts
    3,190
    The reason I asked if you were using Linux Mint 11 or whether you were using an earlier version is because you said you could not update the system. If it's an older version, it may not be supported any longer and no repositories.

    Is the error message you reported in your first post gone now. Your second post seems to indicate it has and that your problem is that you are booting into text mode, correct? Have you gone to the site for minissdpd to check their documentation?

  9. #8
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    Quote Originally Posted by yancek View Post
    Is the error message you reported in your first post gone now? Your second post seems to indicate it is and that your problem is that you are booting into text mode, correct? Have you gone to the site for minissdpd to check their documentation?
    Yes, that's it, the error in the first post is gone, but now the machine boots into text mode. I have indeed gone to minissdpd site but I must admit that I don't know very well where to start since I'm far from being an expert. I'll try a more careful search later and see if I can come up with something.

  10. #9
    Penguin of trust elija's Avatar
    Join Date
    Jul 2004
    Location
    Either at home or at work or down the pub
    Posts
    3,638
    When in text mode, what does
    Code:
    dmesg
    or maybe
    Code:
    sudo dmesg
    show.
    "I used to be with it, then they changed what it was.
    Now what was it isn't it, and what is it is weird and scary to me.
    It'll happen to you too."

    Grandpa Simpson



    The Fifth Continent

  11. #10
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    The output of dmesg is:

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=57b66bb7-22ba-451c-bb37-2b30b2c1a594 ro vga=773 quiet
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
    [    0.000000]  BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: - N/A                                            /IFL91         , BIOS 1.12 08/29/2007
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask F00000000 write-back
    [    0.000000]   2 base 100000000 mask FC0000000 write-back
    [    0.000000]   3 base 0BF700000 mask FFFF00000 uncachable
    [    0.000000]   4 base 0BF800000 mask FFF800000 uncachable
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [ffff8800000f7bc0] f7bc0
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [    0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
    [    0.000000]  0000000000 - 00bf600000 page 2M
    [    0.000000]  00bf600000 - 00bf6d0000 page 4k
    [    0.000000] kernel direct mapping tables up to bf6d0000 @ bf6cb000-bf6d0000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    [    0.000000]  0100000000 - 0140000000 page 2M
    [    0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
    [    0.000000] RAMDISK: 3712e000 - 3788f000
    [    0.000000] ACPI: RSDP 00000000000f7b40 00024 (v02 Compal)
    [    0.000000] ACPI: XSDT 00000000bf6d88b8 0008C (v01 Compal CRESTLNE 06040000  LTP 00000000)
    [    0.000000] ACPI: FACP 00000000bf6dfbd2 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
    [    0.000000] ACPI: DSDT 00000000bf6d9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
    [    0.000000] ACPI: FACS 00000000bf6e2fc0 00040
    [    0.000000] ACPI: APIC 00000000bf6dfcc6 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
    [    0.000000] ACPI: HPET 00000000bf6dfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
    [    0.000000] ACPI: MCFG 00000000bf6dfd66 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
    [    0.000000] ACPI: TCPA 00000000bf6dfda2 00032 (v01 Intel  CRESTLNE 06040000 LOHR 0000005A)
    [    0.000000] ACPI: TMOR 00000000bf6dfdd4 00026 (v01 PTLTD           06040000 PTL  00000003)
    [    0.000000] ACPI: SLIC 00000000bf6dfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD  00000001)
    [    0.000000] ACPI: APIC 00000000bf6dff70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
    [    0.000000] ACPI: BOOT 00000000bf6dffd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
    [    0.000000] ACPI: SSDT 00000000bf6d98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
    [    0.000000] ACPI: SSDT 00000000bf6d8ed0 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
    [    0.000000] ACPI: SSDT 00000000bf6d8e2a 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
    [    0.000000] ACPI: SSDT 00000000bf6d8944 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
    [    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
    [    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000140000000
    [    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    [    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
    [    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00140000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000bf6d0
    [    0.000000]     0: 0x00100000 -> 0x00140000
    [    0.000000] On node 0 totalpages: 1046111
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 5 pages reserved
    [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 765704 pages, LIFO batch:31
    [    0.000000]   Normal zone: 3584 pages used for memmap
    [    0.000000]   Normal zone: 258560 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
    [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf6e3000
    [    0.000000] PM: Registered nosave memory: 00000000bf6e3000 - 00000000c0000000
    [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
    [    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
    [    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78912 r8192 d23488 u1048576
    [    0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028186
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=57b66bb7-22ba-451c-bb37-2b30b2c1a594 ro vga=773 quiet
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 4044808k/5242880k available (3325k kernel code, 1058436k absent, 139636k reserved, 3370k data, 560k init)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:33024 nr_irqs:512 16
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1496.435 MHz processor.
    [    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.87 BogoMIPS (lpj=5985740)
    [    0.004013] pid_max: default: 32768 minimum: 301
    [    0.004141] Security Framework initialized
    [    0.004148] SELinux:  Disabled at boot.
    [    0.004779] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.010649] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.011930] Mount-cache hash table entries: 256
    [    0.012185] Initializing cgroup subsys cpuacct
    [    0.012193] Initializing cgroup subsys memory
    [    0.012212] Initializing cgroup subsys devices
    [    0.012215] Initializing cgroup subsys freezer
    [    0.012219] Initializing cgroup subsys net_cls
    [    0.012224] Initializing cgroup subsys blkio
    [    0.012291] CPU: Physical Processor ID: 0
    [    0.012294] CPU: Processor Core ID: 0
    [    0.012297] mce: CPU supports 6 MCE banks
    [    0.012308] CPU0: Thermal monitoring handled by SMI
    [    0.012315] using mwait in idle threads.
    [    0.012887] ACPI: Core revision 20110413
    [    0.020460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.060647] CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
    [    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.064003] PEBS disabled due to CPU errata.
    [    0.064003] ... version:                2
    [    0.064003] ... bit width:              40
    [    0.064003] ... generic registers:      2
    [    0.064003] ... value mask:             000000ffffffffff
    [    0.064003] ... max period:             000000007fffffff
    [    0.064003] ... fixed-purpose events:   3
    [    0.064003] ... event mask:             0000000700000003
    [    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.064003] Booting Node   0, Processors  #1 Ok.
    [    0.064003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] CPU1: Thermal monitoring handled by SMI
    [    0.152044] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.152094] Brought up 2 CPUs
    [    0.152098] Total of 2 processors activated (5985.39 BogoMIPS).
    [    0.153201] devtmpfs: initialized
    [    0.157837] PM: Registering ACPI NVS region at bf6d0000 (77824 bytes)
    [    0.157837] print_constraints: dummy: 
    [    0.157837] NET: Registered protocol family 16
    [    0.157837] ACPI: bus type pci registered
    [    0.157837] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.157837] PCI: not using MMCONFIG
    [    0.157837] PCI: Using configuration type 1 for base access
    [    0.157837] bio: create slab <bio-0> at 0
    [    0.161121] ACPI: EC: Look up EC in DSDT
    [    0.164683] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.165520] ACPI: SSDT 00000000bf6d965e 001B4 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
    [    0.165953] ACPI: Dynamic OEM Table Load:
    [    0.165958] ACPI: SSDT           (null) 001B4 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
    [    0.166172] ACPI: SSDT 00000000bf6d912f 004AA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
    [    0.166571] ACPI: Dynamic OEM Table Load:
    [    0.166576] ACPI: SSDT           (null) 004AA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
    [    0.166997] ACPI: SSDT 00000000bf6d9812 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
    [    0.167413] ACPI: Dynamic OEM Table Load:
    [    0.167417] ACPI: SSDT           (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
    [    0.167589] ACPI: SSDT 00000000bf6d95d9 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
    [    0.167989] ACPI: Dynamic OEM Table Load:
    [    0.167993] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
    [    0.168494] ACPI: Interpreter enabled
    [    0.168499] ACPI: (supports S0 S3 S4 S5)
    [    0.168532] ACPI: Using IOAPIC for interrupt routing
    [    0.168558] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.169659] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.249219] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [    0.249436] ACPI: No dock devices found.
    [    0.249439] HEST: Table not found.
    [    0.249444] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.250046] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.251225] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.251230] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
    [    0.251235] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.251240] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    [    0.251244] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    [    0.251249] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
    [    0.251253] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
    [    0.251269] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [    0.251330] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [    0.251349] pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xf80fffff 64bit]
    [    0.251361] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.251371] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
    [    0.251417] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [    0.251433] pci 0000:00:02.1: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
    [    0.251538] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [    0.251604] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
    [    0.251655] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [    0.251724] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
    [    0.251791] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [    0.251820] pci 0000:00:1a.7: reg 10: [mem 0xf8604800-0xf8604bff]
    [    0.251925] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.251933] pci 0000:00:1a.7: PME# disabled
    [    0.251970] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [    0.251994] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    [    0.252102] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.252109] pci 0000:00:1b.0: PME# disabled
    [    0.252145] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [    0.252246] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.252252] pci 0000:00:1c.0: PME# disabled
    [    0.252292] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [    0.252393] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.252399] pci 0000:00:1c.1: PME# disabled
    [    0.252437] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
    [    0.252539] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.252545] pci 0000:00:1c.2: PME# disabled
    [    0.252585] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
    [    0.252684] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [    0.252690] pci 0000:00:1c.3: PME# disabled
    [    0.252729] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [    0.252829] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [    0.252835] pci 0000:00:1c.4: PME# disabled
    [    0.252871] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [    0.252972] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [    0.252979] pci 0000:00:1c.5: PME# disabled
    [    0.253016] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [    0.253083] pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
    [    0.253134] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [    0.253201] pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
    [    0.253252] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [    0.253320] pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
    [    0.253388] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [    0.253417] pci 0000:00:1d.7: reg 10: [mem 0xf8604c00-0xf8604fff]
    [    0.253522] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.253529] pci 0000:00:1d.7: PME# disabled
    [    0.253559] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [    0.253661] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [    0.253780] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [    0.253789] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
    [    0.253796] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [    0.253804] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
    [    0.253809] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
    [    0.253857] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [    0.253877] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
    [    0.253892] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
    [    0.253907] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
    [    0.253923] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
    [    0.253938] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
    [    0.254001] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [    0.254033] pci 0000:00:1f.2: reg 10: [io  0x1c00-0x1c07]
    [    0.254048] pci 0000:00:1f.2: reg 14: [io  0x18d4-0x18d7]
    [    0.254063] pci 0000:00:1f.2: reg 18: [io  0x18d8-0x18df]
    [    0.254078] pci 0000:00:1f.2: reg 1c: [io  0x18d0-0x18d3]
    [    0.254093] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
    [    0.254109] pci 0000:00:1f.2: reg 24: [mem 0xf8604000-0xf86047ff]
    [    0.254165] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.254171] pci 0000:00:1f.2: PME# disabled
    [    0.254200] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [    0.254220] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [    0.254270] pci 0000:00:1f.3: reg 20: [io  0x1c20-0x1c3f]
    [    0.254385] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.254392] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.254399] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
    [    0.254409] pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    [    0.254593] pci 0000:04:00.0: [14e4:1713] type 0 class 0x000200
    [    0.254664] pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
    [    0.254978] pci 0000:04:00.0: PME# supported from D3hot D3cold
    [    0.254991] pci 0000:04:00.0: PME# disabled
    [    0.255131] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    [    0.255137] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
    [    0.255144] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
    [    0.255155] pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    [    0.255229] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    [    0.255235] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
    [    0.255242] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf7ffffff]
    [    0.255252] pci 0000:00:1c.2:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    [    0.255326] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    [    0.255332] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
    [    0.255339] pci 0000:00:1c.3:   bridge window [mem 0xb8000000-0xbbffffff]
    [    0.255350] pci 0000:00:1c.3:   bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    [    0.255423] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [    0.255430] pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.255437] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.255447] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.255590] pci 0000:0c:00.0: [8086:4229] type 0 class 0x000280
    [    0.255641] pci 0000:0c:00.0: reg 10: [mem 0xf8200000-0xf8201fff 64bit]
    [    0.255833] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
    [    0.255851] pci 0000:0c:00.0: PME# disabled
    [    0.264067] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    [    0.264074] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.264080] pci 0000:00:1c.5:   bridge window [mem 0xf8200000-0xf82fffff]
    [    0.264091] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.264163] pci 0000:0e:06.0: [1180:0832] type 0 class 0x000c00
    [    0.264181] pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [    0.264185] pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
    [    0.264204] pci 0000:0e:06.0: reg 10: [mem 0xf8300000-0xf83007ff]
    [    0.264302] pci 0000:0e:06.0: supports D1 D2
    [    0.264305] pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.264312] pci 0000:0e:06.0: PME# disabled
    [    0.264339] pci 0000:0e:06.1: [1180:0822] type 0 class 0x000805
    [    0.264364] pci 0000:0e:06.1: reg 10: [mem 0xf8300800-0xf83008ff]
    [    0.264461] pci 0000:0e:06.1: supports D1 D2
    [    0.264465] pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.264471] pci 0000:0e:06.1: PME# disabled
    [    0.264498] pci 0000:0e:06.2: [1180:0592] type 0 class 0x000880
    [    0.264524] pci 0000:0e:06.2: reg 10: [mem 0xf8301000-0xf83010ff]
    [    0.264621] pci 0000:0e:06.2: supports D1 D2
    [    0.264624] pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.264631] pci 0000:0e:06.2: PME# disabled
    [    0.264698] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
    [    0.264706] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.264713] pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xf83fffff]
    [    0.264723] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.264728] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.264733] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
    [    0.264787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.265145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.265236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.265326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [    0.265414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [    0.265501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [    0.265589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [    0.265716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [    0.265806]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.265811]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.265814] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.276899] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [    0.276987] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.277070] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [    0.277150] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.277232] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [    0.277313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [    0.277394] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [    0.277474] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.277637] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.277663] vgaarb: loaded
    [    0.277665] vgaarb: bridge control possible 0000:00:02.0
    [    0.277725] PCI: Using ACPI for IRQ routing
    [    0.290418] PCI: pci_cache_line_size set to 64 bytes
    [    0.290426] pci 0000:00:1c.3: address space collision: [mem 0xb8000000-0xbbffffff] conflicts with System RAM [mem 0x00100000-0xbf6cffff]
    [    0.290695] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    0.290699] reserve RAM buffer: 00000000bf6d0000 - 00000000bfffffff 
    [    0.290864] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.290872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.290879] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.296051] Switching to clocksource hpet
    [    0.298499] pnp: PnP ACPI init
    [    0.298520] ACPI: bus type pnp registered
    [    0.299151] pnp 00:00: [bus 00-ff]
    [    0.299155] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.299159] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.299163] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.299166] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.299170] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [    0.299174] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [    0.299177] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [    0.299181] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [    0.299185] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [    0.299190] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [    0.299194] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [    0.299197] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [    0.299201] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [    0.299204] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [    0.299208] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [    0.299212] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [    0.299215] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [    0.299219] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.299222] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [    0.299226] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [    0.299320] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.299465] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [    0.299469] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [    0.299473] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [    0.299476] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [    0.299479] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [    0.299483] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [    0.299486] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [    0.299490] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [    0.299582] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.299587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [    0.299592] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.299596] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.299601] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.299606] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.299611] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [    0.299616] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [    0.299621] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.299863] Switched to NOHz mode on CPU #0
    [    0.299929] Switched to NOHz mode on CPU #1
    [    0.299957] pnp 00:02: [io  0x0000-0x001f]
    [    0.299960] pnp 00:02: [io  0x0081-0x0091]
    [    0.299963] pnp 00:02: [io  0x0093-0x009f]
    [    0.299966] pnp 00:02: [io  0x00c0-0x00df]
    [    0.299970] pnp 00:02: [dma 4]
    [    0.300040] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.300058] pnp 00:03: [mem 0xff000000-0xffffffff]
    [    0.300116] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.300231] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [    0.300324] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    [    0.300330] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [    0.300351] pnp 00:05: [io  0x00f0]
    [    0.300365] pnp 00:05: [irq 13]
    [    0.300426] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.300447] pnp 00:06: [io  0x002e-0x002f]
    [    0.300451] pnp 00:06: [io  0x0061]
    [    0.300455] pnp 00:06: [io  0x0063]
    [    0.300458] pnp 00:06: [io  0x0065]
    [    0.300461] pnp 00:06: [io  0x0067]
    [    0.300464] pnp 00:06: [io  0x0068]
    [    0.300466] pnp 00:06: [io  0x006c]
    [    0.300469] pnp 00:06: [io  0x0080]
    [    0.300472] pnp 00:06: [io  0x0092]
    [    0.300475] pnp 00:06: [io  0x00b2-0x00b3]
    [    0.300478] pnp 00:06: [io  0x0680-0x069f]
    [    0.300481] pnp 00:06: [io  0x0800-0x080f]
    [    0.300484] pnp 00:06: [io  0x1000-0x107f]
    [    0.300487] pnp 00:06: [io  0x1180-0x11bf]
    [    0.300491] pnp 00:06: [io  0x1640-0x164f]
    [    0.300494] pnp 00:06: [io  0xfe00]
    [    0.300497] pnp 00:06: [io  0xff00-0xff7f]
    [    0.300611] system 00:06: [io  0x0680-0x069f] has been reserved
    [    0.300616] system 00:06: [io  0x0800-0x080f] has been reserved
    [    0.300620] system 00:06: [io  0x1000-0x107f] has been reserved
    [    0.300625] system 00:06: [io  0x1180-0x11bf] has been reserved
    [    0.300629] system 00:06: [io  0x1640-0x164f] has been reserved
    [    0.300634] system 00:06: [io  0xfe00] has been reserved
    [    0.300638] system 00:06: [io  0xff00-0xff7f] has been reserved
    [    0.300643] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.300660] pnp 00:07: [io  0x0070-0x0077]
    [    0.300668] pnp 00:07: [irq 8]
    [    0.300729] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.320061] pnp 00:08: [io  0x0060]
    [    0.320065] pnp 00:08: [io  0x0064]
    [    0.320072] pnp 00:08: [irq 1]
    [    0.320138] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.320159] pnp 00:09: [irq 12]
    [    0.320220] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [    0.320257] pnp: PnP ACPI: found 10 devices
    [    0.320260] ACPI: ACPI bus type pnp unregistered
    [    0.327502] PCI: max bus depth: 1 pci_try_num: 2
    [    0.327594] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4000000-0xc40000ff]
    [    0.327602] pci 0000:00:1f.3: BAR 0: set to [mem 0xc4000000-0xc40000ff] (PCI address [0xc4000000-0xc40000ff])
    [    0.327610] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc4100000-0xc42fffff 64bit pref]
    [    0.327617] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
    [    0.327623] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4300000-0xc44fffff]
    [    0.327630] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4500000-0xc46fffff 64bit pref]
    [    0.327636] pci 0000:00:1c.4: BAR 13: assigned [io  0x7000-0x7fff]
    [    0.327642] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc4700000-0xc4afffff]
    [    0.327647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.327652] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.327661] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
    [    0.327668] pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    [    0.327678] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    [    0.327683] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
    [    0.327692] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
    [    0.327699] pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    [    0.327709] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    [    0.327714] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
    [    0.327723] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf7ffffff]
    [    0.327730] pci 0000:00:1c.2:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    [    0.327740] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    [    0.327745] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
    [    0.327754] pci 0000:00:1c.3:   bridge window [mem 0xc4700000-0xc4afffff]
    [    0.327760] pci 0000:00:1c.3:   bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    [    0.327770] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    [    0.327775] pci 0000:00:1c.4:   bridge window [io  0x7000-0x7fff]
    [    0.327784] pci 0000:00:1c.4:   bridge window [mem 0xc4300000-0xc44fffff]
    [    0.327791] pci 0000:00:1c.4:   bridge window [mem 0xc4500000-0xc46fffff 64bit pref]
    [    0.327801] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    [    0.327806] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
    [    0.327815] pci 0000:00:1c.5:   bridge window [mem 0xf8200000-0xf82fffff]
    [    0.327822] pci 0000:00:1c.5:   bridge window [mem 0xc4100000-0xc42fffff 64bit pref]
    [    0.327833] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
    [    0.327836] pci 0000:00:1e.0:   bridge window [io  disabled]
    [    0.327844] pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xf83fffff]
    [    0.327850] pci 0000:00:1e.0:   bridge window [mem pref disabled]
    [    0.327877] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.327884] pci 0000:00:1c.0: setting latency timer to 64
    [    0.327899] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    0.327906] pci 0000:00:1c.1: setting latency timer to 64
    [    0.327920] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.327926] pci 0000:00:1c.2: setting latency timer to 64
    [    0.327940] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.327947] pci 0000:00:1c.3: setting latency timer to 64
    [    0.327957] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.327964] pci 0000:00:1c.4: setting latency timer to 64
    [    0.327973] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    0.327980] pci 0000:00:1c.5: setting latency timer to 64
    [    0.327990] pci 0000:00:1e.0: setting latency timer to 64
    [    0.327996] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    [    0.328013] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
    [    0.328017] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
    [    0.328020] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
    [    0.328025] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
    [    0.328029] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
    [    0.328033] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
    [    0.328037] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
    [    0.328041] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
    [    0.328045] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
    [    0.328048] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
    [    0.328052] pci_bus 0000:08: resource 0 [io  0x5000-0x5fff]
    [    0.328056] pci_bus 0000:08: resource 1 [mem 0xc4700000-0xc4afffff]
    [    0.328060] pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
    [    0.328064] pci_bus 0000:0a: resource 0 [io  0x7000-0x7fff]
    [    0.328068] pci_bus 0000:0a: resource 1 [mem 0xc4300000-0xc44fffff]
    [    0.328072] pci_bus 0000:0a: resource 2 [mem 0xc4500000-0xc46fffff 64bit pref]
    [    0.328076] pci_bus 0000:0c: resource 0 [io  0x6000-0x6fff]
    [    0.328079] pci_bus 0000:0c: resource 1 [mem 0xf8200000-0xf82fffff]
    [    0.328083] pci_bus 0000:0c: resource 2 [mem 0xc4100000-0xc42fffff 64bit pref]
    [    0.328088] pci_bus 0000:0e: resource 1 [mem 0xf8300000-0xf83fffff]
    [    0.328091] pci_bus 0000:0e: resource 4 [io  0x0000-0xffff]
    [    0.328095] pci_bus 0000:0e: resource 5 [mem 0x00000000-0xfffffffff]
    [    0.328212] NET: Registered protocol family 2
    [    0.328468] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.330452] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.335413] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.336059] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.336063] TCP reno registered
    [    0.336082] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.336137] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.336397] NET: Registered protocol family 1
    [    0.336426] pci 0000:00:02.0: Boot video device
    [    0.336746] PCI: CLS 64 bytes, default 64
    [    0.336819] Unpacking initramfs...
    [    2.634249] Freeing initrd memory: 7556k freed
    [    2.638402] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    2.638410] Placing 64MB software IO TLB between ffff8800bb6cb000 - ffff8800bf6cb000
    [    2.638414] software IO TLB at phys 0xbb6cb000 - 0xbf6cb000
    [    2.638463] Simple Boot Flag at 0x38 set to 0x1
    [    2.639148] audit: initializing netlink socket (disabled)
    [    2.639167] type=2000 audit(1318609401.632:1): initialized
    [    2.676159] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    2.702494] VFS: Disk quotas dquot_6.5.2
    [    2.702549] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    2.702663] msgmni has been set to 7914
    [    2.702949] alg: No test for stdrng (krng)
    [    2.703009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    2.703014] io scheduler noop registered
    [    2.703017] io scheduler deadline registered
    [    2.703050] io scheduler cfq registered (default)
    [    2.703218] pcieport 0000:00:1c.0: setting latency timer to 64
    [    2.703360] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [    2.703549] pcieport 0000:00:1c.1: setting latency timer to 64
    [    2.703683] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [    2.703864] pcieport 0000:00:1c.2: setting latency timer to 64
    [    2.703997] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [    2.704194] pcieport 0000:00:1c.3: setting latency timer to 64
    [    2.704325] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [    2.704505] pcieport 0000:00:1c.4: setting latency timer to 64
    [    2.704641] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [    2.704823] pcieport 0000:00:1c.5: setting latency timer to 64
    [    2.704956] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
    [    2.705240] vesafb: mode is 1024x768x8, linelength=1024, pages=0
    [    2.705243] vesafb: scrolling: redraw
    [    2.705247] vesafb: Pseudocolor: size=0:6:6:6, shift=0:0:0:0
    [    2.705404] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 768k, total 768k
    [    2.713393] Console: switching to colour frame buffer device 128x48
    [    2.721226] fb0: VESA VGA frame buffer device
    [    2.721253] ERST: Table is not found!
    [    2.721330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    2.760629] Linux agpgart interface v0.103
    [    2.760765] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [    2.760889] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [    2.761545] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [    2.761684] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [    2.761874] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    2.801909] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.801920] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    2.802094] mousedev: PS/2 mouse device common for all mice
    [    2.805760] rtc_cmos 00:07: RTC can wake from S4
    [    2.805914] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [    2.805959] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    2.805973] cpuidle: using governor ladder
    [    2.805976] cpuidle: using governor menu
    [    2.806320] TCP cubic registered
    [    2.806423] NET: Registered protocol family 10
    [    2.807200] Mobile IPv6
    [    2.807204] NET: Registered protocol family 17
    [    2.807211] Registering the dns_resolver key type
    [    2.807358] PM: Hibernation image not present or could not be loaded.
    [    2.807376] registered taskstats version 1
    [    2.821486] rtc_cmos 00:07: setting system clock to 2011-10-14 16:23:22 UTC (1318609402)
    [    2.821572] Initializing network drop monitor service
    [    2.823482] Freeing unused kernel memory: 560k freed
    [    2.823644] Write protecting the kernel read-only data: 6144k
    [    2.828353] Freeing unused kernel memory: 752k freed
    [    2.832980] Freeing unused kernel memory: 720k freed
    [    2.847495] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    2.852895] udevd[48]: starting version 172
    [    2.883314] usbcore: registered new interface driver usbfs
    [    2.883348] usbcore: registered new interface driver hub
    [    2.899306] tg3.c:v3.119 (May 18, 2011)
    [    2.899374] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.899395] tg3 0000:04:00.0: setting latency timer to 64
    [    2.902486] usbcore: registered new device driver usb
    [    2.903197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.903246] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.903280] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    2.903287] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    2.903324] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    2.903391] ehci_hcd 0000:00:1a.7: debug port 1
    [    2.907284] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [    2.915537] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
    [    2.931494] sdhci: Secure Digital Host Controller Interface driver
    [    2.931499] sdhci: Copyright(c) Pierre Ossman
    [    2.931823] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
    [    2.931865] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    [    2.932901] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [    2.932935] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    2.932972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    2.932977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.932981] usb usb1: Product: EHCI Host Controller
    [    2.932984] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
    [    2.932987] usb usb1: SerialNumber: 0000:00:1a.7
    [    2.933164] hub 1-0:1.0: USB hub found
    [    2.933172] hub 1-0:1.0: 4 ports detected
    [    2.933315] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    2.933343] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    2.933351] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    2.933366] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    2.933428] ehci_hcd 0000:00:1d.7: debug port 1
    [    2.937317] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [    2.950996] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
    [    2.960037] mmc0: no vmmc regulator found
    [    2.961090] Registered led device: mmc0::
    [    2.962150] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
    [    2.962218] firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    2.968657] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.968736] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [    2.968741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.968745] usb usb2: Product: EHCI Host Controller
    [    2.968748] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
    [    2.968751] usb usb2: SerialNumber: 0000:00:1d.7
    [    2.968927] hub 2-0:1.0: USB hub found
    [    2.968935] hub 2-0:1.0: 6 ports detected
    [    2.969690] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.969764] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.969782] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    2.969790] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    2.969804] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    2.969871] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [    2.969935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.969939] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.969943] usb usb3: Product: UHCI Host Controller
    [    2.969946] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
    [    2.969949] usb usb3: SerialNumber: 0000:00:1a.0
    [    2.970104] hub 3-0:1.0: USB hub found
    [    2.970111] hub 3-0:1.0: 2 ports detected
    [    2.970238] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    2.970252] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    2.970259] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    2.970270] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    2.970328] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [    2.970388] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.970392] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.970396] usb usb4: Product: UHCI Host Controller
    [    2.970399] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
    [    2.970402] usb usb4: SerialNumber: 0000:00:1a.1
    [    2.970531] hub 4-0:1.0: USB hub found
    [    2.970537] hub 4-0:1.0: 2 ports detected
    [    2.970656] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    2.970670] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    2.970677] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.970688] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [    2.970733] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
    [    2.970805] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.970811] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.970816] usb usb5: Product: UHCI Host Controller
    [    2.970819] usb usb5: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
    [    2.970823] usb usb5: SerialNumber: 0000:00:1d.0
    [    2.970977] hub 5-0:1.0: USB hub found
    [    2.970983] hub 5-0:1.0: 2 ports detected
    [    2.971041] SCSI subsystem initialized
    [    2.971102] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.971115] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    2.971122] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.971133] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [    2.971192] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
    [    2.971253] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.971257] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.971261] usb usb6: Product: UHCI Host Controller
    [    2.971264] usb usb6: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
    [    2.971267] usb usb6: SerialNumber: 0000:00:1d.1
    [    2.971408] hub 6-0:1.0: USB hub found
    [    2.971415] hub 6-0:1.0: 2 ports detected
    [    2.971532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.971547] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    2.971554] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.971565] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [    2.971614] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
    [    2.971673] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.971677] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.971681] usb usb7: Product: UHCI Host Controller
    [    2.971684] usb usb7: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
    [    2.971687] usb usb7: SerialNumber: 0000:00:1d.2
    [    2.971827] hub 7-0:1.0: USB hub found
    [    2.971833] hub 7-0:1.0: 2 ports detected
    [    2.999525] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:5a:cd:2d
    [    2.999532] tg3 0000:04:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
    [    2.999537] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [    2.999542] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [    2.999991] libata version 3.00 loaded.
    [    3.000544] ata_piix 0000:00:1f.1: version 2.13
    [    3.000564] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    3.000629] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    3.001087] scsi0 : ata_piix
    [    3.001252] scsi1 : ata_piix
    [    3.001921] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [    3.001925] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [    3.024151] firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [    3.176680] ata1.00: ATAPI: Optiarc DVD RW AD-5540A, 2.01, max UDMA/33
    [    3.192348] ata1.00: configured for UDMA/33
    [    3.195129] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-5540A  2.01 PQ: 0 ANSI: 5
    [    3.195934] ahci 0000:00:1f.2: version 3.0
    [    3.195958] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    3.196089] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [    3.196191] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    [    3.196197] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
    [    3.196208] ahci 0000:00:1f.2: setting latency timer to 64
    [    3.201563] scsi2 : ahci
    [    3.201672] scsi3 : ahci
    [    3.201766] scsi4 : ahci
    [    3.201975] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 46
    [    3.201982] ata4: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 46
    [    3.201989] ata5: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 46
    [    3.520048] ata4: SATA link down (SStatus 0 SControl 300)
    [    3.520083] ata5: SATA link down (SStatus 0 SControl 300)
    [    3.524138] firewire_core: created device fw0: GUID 00023f79bc402cf8, S400
    [    3.616025] usb 4-1: new full speed USB device number 2 using uhci_hcd
    [    3.636025] Refined TSC clocksource calibration: 1496.249 MHz.
    [    3.636031] Switching to clocksource tsc
    [    3.786389] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2101
    [    3.786394] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    3.786397] usb 4-1: Product: Foxconn Bluetooth 2.0 plus EDR
    [    3.786400] usb 4-1: Manufacturer: Broadcom Corp
    [    3.856037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.856597] ata3.00: unexpected _GTF length (8)
    [    4.028015] usb 7-2: new low speed USB device number 2 using uhci_hcd
    [    4.196677] usb 7-2: New USB device found, idVendor=15ca, idProduct=00c3
    [    4.196682] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [    4.196686] usb 7-2: Product: USB Optical Mouse
    [    4.238188] ata3.00: ATA-8: TOSHIBA MK1646GSX, LB111A, max UDMA/100
    [    4.238194] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    4.239058] ata3.00: unexpected _GTF length (8)
    [    4.239250] ata3.00: configured for UDMA/100
    [    4.239411] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
    [    4.247944] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [    4.247949] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    4.248254] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    4.248439] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [    4.248521] sd 2:0:0:0: [sda] Write Protect is off
    [    4.248526] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    4.248561] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.259047] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input1
    [    4.259164] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2/input0
    [    4.259192] usbcore: registered new interface driver usbhid
    [    4.259195] usbhid: USB HID core driver
    [    4.357596]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    4.358126] sd 2:0:0:0: [sda] Attached SCSI disk
    [    4.361032] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    4.361094] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    5.168605] Btrfs loaded
    [    5.322235] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    7.569580] udevd[279]: starting version 172
    [    8.404122] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [    8.404182] ACPI: Lid Switch [LID0]
    [    8.404257] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [    8.404263] ACPI: Power Button [PWRB]
    [    8.404362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [    8.404367] ACPI: Power Button [PWRF]
    [    8.528238] cfg80211: Calling CRDA to update world regulatory domain
    [    8.597689] ACPI: acpi_idle registered with cpuidle
    [    8.600934] Monitor-Mwait will be used to enter C-1 state
    [    8.600969] Monitor-Mwait will be used to enter C-2 state
    [    8.601000] Monitor-Mwait will be used to enter C-3 state
    [    8.601009] Marking TSC unstable due to TSC halts in idle
    [    8.601265] Switching to clocksource hpet
    [    8.622645] wmi: Mapper loaded
    [    8.640720] ACPI: AC Adapter [ACAD] (on-line)
    [    8.694378] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [    8.972564] ACPI: Battery Slot [BAT1] (battery present)
    [    8.976830] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [    9.161245] compal_laptop: Identified laptop model 'FL91/IFL91'
    [    9.161533] compal_laptop: Driver 0.2.7 successfully loaded
    [    9.207861] [drm] Initialized drm 1.1.0 20060810
    [    9.360677] elantech: assuming hardware version 1, firmware version 2.0.4
    [    9.368817] r592 0000:0e:06.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    [    9.368950] r592: driver successfully loaded
    [    9.420767] udevd[357]: renamed network interface eth0 to eth1
    [    9.467026] elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
    [    9.525124] Bluetooth: Core ver 2.16
    [    9.525160] NET: Registered protocol family 31
    [    9.525163] Bluetooth: HCI device and connection manager initialized
    [    9.525167] Bluetooth: HCI socket layer initialized
    [    9.525170] Bluetooth: L2CAP socket layer initialized
    [    9.525221] Bluetooth: SCO socket layer initialized
    [    9.620677] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
    [    9.620682] iwl4965: Copyright(c) 2003-2011 Intel Corporation
    [    9.620840] iwl4965 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    9.620881] iwl4965 0000:0c:00.0: setting latency timer to 64
    [    9.620959] iwl4965 0000:0c:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
    [    9.664302] iwl4965 0000:0c:00.0: device EEPROM VER=0x36, CALIB=0x5
    [    9.664345] iwl4965 0000:0c:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
    [    9.664533] iwl4965 0000:0c:00.0: irq 47 for MSI/MSI-X
    [    9.696082] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [    9.696929] usbcore: registered new interface driver btusb
    [    9.772958] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    9.772966] i915 0000:00:02.0: setting latency timer to 64
    [    9.830850] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    [    9.830855] [drm] MTRR allocation failed.  Graphics performance may suffer.
    [    9.831362] i915 0000:00:02.0: irq 48 for MSI/MSI-X
    [    9.831371] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    9.831373] [drm] Driver supports precise vblank timestamp query.
    [    9.831437] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [   10.165172] [drm] initialized overlay support
    [   10.187286] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
    [   10.285225] iwl4965 0000:0c:00.0: loaded firmware version 228.61.2.24
    [   10.285537] Registered led device: phy0-led
    [   10.305085] checking generic (d0000000 c0000) vs hw (d0000000 10000000)
    [   10.305091] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [   10.305126] Console: switching to colour dummy device 80x25
    [   10.305825] fbcon: inteldrmfb (fb0) is primary device
    [   10.334320] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
    [   10.344587] fixme: max PWM is zero.
    [   10.344608] Console: switching to colour frame buffer device 160x50
    [   10.383160] fb0: inteldrmfb frame buffer device
    [   10.383163] drm: registered panic notifier
    [   10.413713] acpi device:08: registered as cooling_device2
    [   10.413929] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
    [   10.414015] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   10.414138] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   10.414220] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [   10.414370] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
    [   10.414438] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   10.481490] hda_codec: ALC268: BIOS auto-probing.
    [   10.481949] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [   10.580714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   10.580822] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   11.907635] EXT4-fs (sda1): re-mounted. Opts: (null)
    [   12.076223] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   12.237980] loop: module loaded
    [   13.963527] fuse init (API version 7.16)
    [   14.934711] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   15.019586] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [   15.239207] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   21.084902] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
    [   21.125056] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [   21.374825] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   22.659166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   22.659171] Bluetooth: BNEP filters: protocol multicast
    [   22.721567] Bluetooth: RFCOMM TTY layer initialized
    [   22.721574] Bluetooth: RFCOMM socket layer initialized
    [   22.721577] Bluetooth: RFCOMM ver 1.11
    [   23.349086] lp: driver loaded but no devices found
    [   23.465922] ppdev: user-space parallel port driver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •