Find the answer to your Linux question:
Results 1 to 2 of 2
I recently bought an embedded linux board from glomation, specifically the GESBC-9260S. The serial port is silent, i dont get a response when using minicom (hyperterminal), it is not my ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2010
    Posts
    1

    GESBC-9260S silent serial port


    I recently bought an embedded linux board from glomation, specifically the GESBC-9260S.

    The serial port is silent, i dont get a response when using minicom (hyperterminal), it is not my computer's problem as i have no problem talking to MikroTik RouterBOARDS.

    I have set the bits per second to 115200, 8 data bits, no parity.
    Am i missing something? I have read the manual thoroughly and does not give any advice in this situation.

    Is there anyway to communicate with the board through some other port? such as ethernet port?

  2. #2
    Linux Guru Rubberman's Avatar
    Join Date
    Apr 2009
    Location
    I can be found either 40 miles west of Chicago, in Chicago, or in a galaxy far, far away.
    Posts
    11,753
    If you are trying to login on that port, then getty has to be running on it.
    Sometimes, real fast is almost as good as real time.
    Just remember, Semper Gumbi - always be flexible!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •