Find the answer to your Linux question:
Results 1 to 9 of 9
Trying to burn a cd but I keep getting the following error. The command I use is: cdrecord -v -raw16 speed=2 dev=0,0,0 -data /home/genlee/gentoo-3stages-x86-1.4_rc4.iso Code: 3stages-x86-1.4_rc4.iso Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994

    cd burner problems


    Trying to burn a cd but I keep getting the following error. The command I use is: cdrecord -v -raw16 speed=2 dev=0,0,0 -data /home/genlee/gentoo-3stages-x86-1.4_rc4.iso

    Code:
    3stages-x86-1.4_rc4.iso
    Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 J�rg Schilling
    TOC Type: 1 = CD-ROM
    scsidev: '0,0,0'
    scsibus: 0 target: 0 lun: 0
    Linux sg driver version: 3.1.24
    Using libscg version 'schily-0.7'
    atapi: 1
    Device type    : Removable CD-ROM
    Version        : 0
    Response Format: 1
    Vendor_info    : 'SAMSUNG '
    Identifikation : 'CD-R/RW SCW-230 '
    Revision       : 'S102'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
    Driver flags   : MMC SWABAUDIO
    Supported modes: TAO PACKET RAW/R16
    Drive buf size : 786432 = 768 KB
    FIFO size      : 4194304 = 4096 KB
    Encoding speed : 374x (28020 sectors/s) for libedc from Heiko Ei�feldt
    Track 01: data   214 MB
    Total size:      246 MB (24:23.54) = 109766 sectors
    Lout start:      246 MB (24:25/41) = 109766 sectors
    Current Secsize: 2048
      ATIP start of lead in:  -11232 (97:32/18)
      ATIP start of lead out: 359848 (79:59/73)
    Disk type:    Short strategy type (Phthalocyanine or similar)
    Manuf. index: 27
    Manufacturer: Prodisc Technology Inc.
    Blocks total: 359848 Blocks current: 359848 Blocks remaining: 250082
    Starting to write CD/DVD at speed 2 in real RAW/RAW16 mode for single session.
    Last chance to quit, starting real write    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    cdrecord: Input/output error. send opc: scsi sendcmd: no error
    CDB:  54 01 00 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: F0 00 03 00 00 00 00 0A 00 01 5D 84 73 03 00 00
    Sense Key: 0x3 Medium Error, Segment 0
    Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
    Sense flags: Blk 0 (valid)
    cmd finished after 10.230s timeout 60s
    cdrecord: OPC failed.
    Writing  time:   10.340s
    cdrecord: fifo had 64 puts and 0 gets.
    cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

  2. #2
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578
    What is -raw16? It doesn't seem to be present in my version of cdrecord.

  3. #3
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    I fixed the problem. Either my cd burner is really picky or I had 5 bad cds. Raw16 is a way of burning cds, usually only supported by ****** burners like mine

  4. $spacer_open
    $spacer_close
  5. #4
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578
    Maybe you should consider buying a new writer? ;-)
    Considering how much they've dropped in pricing lately, it might be worth doing it anyway, to be able to burn faster than 2x?

  6. #5
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    Well I have been broke until recently. Just started my new job as a security analyst for the govt so I will be building a new box really soon.

  7. #6
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578
    Quote Originally Posted by genlee
    security analyst for the govt
    Uhmm... now there's a job title that sounds pretty cool... =)
    However did you get that kind of job?

  8. #7
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    I sent this company my resume which does contract work for the dept of defense. I guess they were impressed by my resume I work at this navel base and the area I work in specializes on firewalls. So I get to play with expensive checkpoint firewalls and solaris machines all day.

  9. #8
    Linux Guru
    Join Date
    Oct 2001
    Location
    Täby, Sweden
    Posts
    7,578
    That is so unfair... =)

    Btw.:
    Quote Originally Posted by genlee
    I work at this navel base
    Do you realize just what you wrote?

  10. #9
    Linux Engineer
    Join Date
    Jan 2003
    Location
    Lebanon, pa
    Posts
    994
    Yeah I been drinking beer tonite and can't spell. But not like I can spell any better sober.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •