i'm trying to clone a hard drive using dd & netcat.
However after a while since the process was initiated I get aQuote:
nc -l -p 1333 |dd of=/dev/sdb
dd if=/dev/sdb |nc 192.168.0.5 1333
I/O error in filesystem ("....") meta-data dev ...block 0x..... ("xfs_read_buf") error 5 buf count 512
XFS: size check 2 failed
Further digging showed that the target hard drive was less in space by 100 kb. Both are 1 T drives seagte but different models, hence the diff in space maybe.The data on the original drive is only 900 GB. How do i get around this problem?