Find the answer to your Linux question:
Results 1 to 3 of 3
Hi All, This is my first time here and I am a new user for Linux and Oracle installation. I installed Oracle Unbreakable Linux 5.4 64bit on IBM X3500 M2 ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Dec 2009
    Posts
    1

    Question Checking Network Configuration requirements


    Hi All,

    This is my first time here and I am a new user for Linux and Oracle installation.
    I installed Oracle Unbreakable Linux 5.4 64bit on IBM X3500 M2 Machine.
    I have configured my static IP address at the time of Linux Installtion

    After installing all the pre requirements for the Oracle 10g R2 installation I was stopped with a warning on the Oracle univesal Installer - product specific Prerequisite check.

    This is what it gave me---
    -----------------------------------------------------------------
    Checking Network Configuration requirements..
    Check complete. The overall results of this check is : Not executed <<<
    Recomendation : Oracle supports installation on systems with DHCP-assigned public IP addresses. However the primary network interface on the system should be configured with a Static IP Address in order for the oracle to function properly.See the installation guide for more details on installing the software on systems configured with DHCP.
    -------------------------------------------------------------------

    I have checked with the manuals and do not find any information about how to fix it.

    Please let me suggest the best possible solutions

    Thanks for your help!!

  2. #2
    Just Joined!
    Join Date
    Dec 2009
    Posts
    2
    you are probably using the default network card.


    fill in the fields that are in parentesis and replace "/etc/sysconfig/network-scripts/ifcfg-eth0" there should be no parentesis when you are done

    with this content

    DEVICE=eth0
    BROADCAST=(first 3 sets of numbers here from your IP IE x.x.x).255
    IPADDR=(ip address here x.x.x.x )
    NETMASK=255.255.255.0 (this is your subnet mask)
    NETWORK=(first 3 sets of numbers here x.x.x.x).0
    GATEWAY=(Gateway here x.x.x.x )
    ONBOOT=yes
    TYPE=Ethernet


    SAMPLE:


    DEVICE=eth0
    BROADCAST=10.20.30.255
    IPADDR=10.20.30.50
    NETMASK=255.255.255.0
    NETWORK=10.20.30.0
    GATEWAY=10.20.30.1
    ONBOOT=yes
    TYPE=Ethernet

  3. #3
    Just Joined!
    Join Date
    Nov 2010
    Posts
    1
    Hi,
    Does anyone find the solutions of this
    I have the same problem, I have set static ip address but stil the problem accur

    Thanks
    Andhikaup

  4. $spacer_open
    $spacer_close

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •