Results 1 to 6 of 6
Hi Everyone, having some frustrating issues getting the WG111v2 usb dongle to work with Karmic NBR. Using an HP mini 1030NR.
I have tried Wicd, Ndiswrapper (with various drivers) and ...
- 01-31-2010 #1Just Joined!
- Join Date
- Jan 2010
- Posts
- 4
Netgear WG111v2 (USB) DHCP(?) issues with Karmic
Hi Everyone, having some frustrating issues getting the WG111v2 usb dongle to work with Karmic NBR. Using an HP mini 1030NR.
I have tried Wicd, Ndiswrapper (with various drivers) and the native RTL8187 driver. Can always see the APs and connect, obtain an IP address, and see the AP's MAC..... but I'm never able to download any information... the connection just hangs.
Other people report that the WG111v2 works out of the box with Karmic.
I've lost the receipt..... :o0
I've disabled security on the AP.
I've tried a live USB of the latest standard Ubuntu, with the same results.
I hope someone can help - I'm going crazy!
Here's some terminal output.....
IWconfig
dmesgCode:wlan0 IEEE 802.11bg ESSID:"NETGEAR" Mode:Managed Frequency:2.437 GHz Access Point: 00:0F:B5:E4:27:4C Bit Rate=18 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=32/70 Signal level=-78 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid
iwlist scanCode:[ 65.834203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 91.726587] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 91.973488] wlan0: authenticate with AP 00:0f:b5:e4:27:4c [ 91.973698] wlan0: authenticate with AP 00:0f:b5:e4:27:4c [ 91.978084] wlan0: authenticated [ 91.978104] wlan0: associate with AP 00:0f:b5:e4:27:4c [ 91.981339] wlan0: deauthenticated (Reason: 6) [ 92.980126] wlan0: direct probe to AP 00:0f:b5:e4:27:4c try 1 [ 92.983749] wlan0 direct probe responded [ 92.983766] wlan0: authenticate with AP 00:0f:b5:e4:27:4c [ 92.986086] wlan0: authenticated [ 92.986107] wlan0: associate with AP 00:0f:b5:e4:27:4c [ 92.989021] wlan0: RX AssocResp from 00:0f:b5:e4:27:4c (capab=0x421 status=0 aid=11) [ 92.989041] wlan0: associated [ 92.995511] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 103.112063] wlan0: no IPv6 routers present [ 300.321104] wlan0: no probe response from AP 00:0f:b5:e4:27:4c - disassociating [ 309.359148] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 311.787368] wlan0: authenticate with AP 00:0f:b5:e4:27:4c [ 311.789848] wlan0: authenticated [ 311.789859] wlan0: associate with AP 00:0f:b5:e4:27:4c [ 311.792140] wlan0: RX AssocResp from 00:0f:b5:e4:27:4c (capab=0x421 status=0 aid=11) [ 311.792155] wlan0: associated [ 311.797251] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 322.264068] wlan0: no IPv6 routers present [ 729.630621] wlan0: no probe response from AP 00:0f:b5:e4:27:4c - disassociating [ 1546.114546] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1548.525675] wlan0: authenticate with AP 00:0f:b5:e4:27:4c [ 1548.528749] wlan0: authenticated [ 1548.528769] wlan0: associate with AP 00:0f:b5:e4:27:4c [ 1548.531072] wlan0: RX AssocResp from 00:0f:b5:e4:27:4c (capab=0x421 status=0 aid=6) [ 1548.531088] wlan0: associated [ 1548.538911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1558.760081]
(root user) route -nCode:wlan0 Scan completed : Cell 01 - Address: 00:0F:B5:E4:27:4C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=36/70 Signal level=-74 dBm Encryption key:off ESSID:"NETGEAR" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=00000026bff7998b Extra: Last beacon: 62612ms ago IE: Unknown: 00074E455447454152 IE: Unknown: 010882848B960C183048 IE: Unknown: 030106 IE: Unknown: 2A0100 IE: Unknown: 32041224606C IE: Unknown: DD0900037F0101001FFF7F IE: Unknown: DD1A00037F0301000000000FB5E4274C020FB5E4274C64002C011F08
(root user) lsmod | grep rtCode:Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
Code:rtl8187 50624 0 mac80211 181140 1 rtl8187 led_class 4096 1 rtl8187 eeprom_93cx6 1916 1 rtl8187 cfg80211 93052 2 rtl8187,mac80211 parport 35340 2 ppdev,lp agpgart 34988 2 drm,intel_agp
GoogleChat reports it connects, but eventually just times out.
If anyone has the slightest idea what is going on here, I would be very much indebted to you. And your karma will no doubt benefit!
Cheers.
- 01-31-2010 #2
While I am not a wireless expert per se. I have encountered problems with the latest Wicd 1.7 in AntiX and Debian users have also. One way I fixed this was to uninstall wicd 1.7 and use wicd 1.5 instead. Another thing was instead of using Automatic in Prefernces>Properties in wicd, (I am in Puppy Linux right now so I might have that reversed) I used dhclient instead and wext in driver also. Hope that works for you.
I would also wait and see if waterhead or reed9 has any better info for you if rhey weigh in on this thread. Good Luck with it. RokLinux Registered User # 475019
Lead,Follow, or get the heck out of the way
AntiX,Puppy,Ubuntu,Windows 7=(cuz of scooters)
Open CourseWare for Linux Geeks
- 01-31-2010 #3Just Joined!
- Join Date
- Jan 2010
- Posts
- 4
Thanks, though I don't think it's a wicd issue, as the native Network manager produces exactly the same results.

Tried installing 1.5 and changing the settings you suggest, but no joy.
- 01-31-2010 #4
Sorry to hear that.
How about Posting readout instructions from
http://www.linuxforums.org/forum/wir...tart-here.html
and post your readouts in next post so forum members can get a better idea pn what is happening.Linux Registered User # 475019
Lead,Follow, or get the heck out of the way
AntiX,Puppy,Ubuntu,Windows 7=(cuz of scooters)
Open CourseWare for Linux Geeks
- 02-01-2010 #5Just Joined!
- Join Date
- Jan 2010
- Posts
- 4
Okay, here's the output from the little script you guys were kind enough to write.

Incidentally, there's an internal wireless card (Broadcom4312) which I've blacklisted the driver for. It doesn't perform at all well with my router, and I was told that the wg111v2 dongle not only worked out of the box, but would work much better with the router....
The broadcom card seems to show as "wlanmaster" even if it is disabled..... could this be anything to do with the problem?
Thanks in advance,
Cwis.
Code:============ lspci ============ 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) Kernel modules: i2c-i801 01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Kernel modules: wl, ssb ============ lsusb ============ Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0846:6a00 NetGear, Inc. WG111v2 54 Mbps Wireless [RealTek RTL8187L] Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive Bus 001 Device 002: ID 10f1:1a08 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============ lsmod ============ Module Size Used by nls_iso8859_1 3740 1 nls_cp437 5372 1 vfat 10716 1 fat 51452 1 vfat binfmt_misc 8356 1 ppdev 6688 0 arc4 1660 2 ecb 2524 2 joydev 10240 0 snd_hda_codec_idt 59844 1 rtl8187 50624 0 mac80211 181140 1 rtl8187 led_class 4096 1 rtl8187 eeprom_93cx6 1916 1 rtl8187 snd_hda_intel 26920 2 snd_hda_codec 75708 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 7200 1 snd_hda_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss iptable_filter 3100 0 snd_seq_dummy 2656 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables snd_seq_oss 28576 0 snd_seq_midi 6432 0 snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event uvcvideo 59080 0 videodev 36736 1 uvcvideo v4l1_compat 14496 2 uvcvideo,videodev snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq cfg80211 93052 2 rtl8187,mac80211 psmouse 56500 0 serio_raw 5280 0 snd 59204 16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7264 1 snd snd_page_alloc 9156 2 snd_hda_intel,snd_pcm lp 8964 0 parport 35340 2 ppdev,lp fbcon 36640 72 tileblit 2460 1 fbcon font 8124 1 fbcon bitblit 5372 1 fbcon softcursor 1756 1 bitblit usb_storage 52576 1 i915 221320 2 drm 159584 2 i915 i2c_algo_bit 5760 1 i915 intel_agp 27484 2 i915 agpgart 34988 2 drm,intel_agp video 19380 1 i915 output 2780 1 video ============ dmesg-firmware ============ ============ kernel version ============ 2.6.31-17-generic ============ ifconfig ============ lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:360 (360.0 B) TX bytes:360 (360.0 B) wlan0 Link encap:Ethernet HWaddr 00:1f:33:7b:51:4d inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21f:33ff:fe7b:514d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:38 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7507 (7.5 KB) TX bytes:5725 (5.7 KB) wmaster0 Link encap:UNSPEC HWaddr 00-1F-33-7B-51-4D-37-62-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ============ iwconfig ============ wlan0 IEEE 802.11bg ESSID:"NETGEAR" Mode:Managed Frequency:2.437 GHz Access Point: 00:0F:B5:E4:27:4C Bit Rate=48 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
- 02-02-2010 #6Just Joined!
- Join Date
- Jan 2010
- Posts
- 4
<bump!>>


Reply With Quote
