Find the answer to your Linux question:
Results 1 to 2 of 2
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1

    Question solution of error


    hi all,

    when i m running wireless simulation that give me this type of error. so please give me guide how to solve this. this error is in running mixim1.2 framework in omnet++4.1.

    now i m putting the exact error. when i m running simulation that show me.

    ERROR:

    OMNeT++ Discrete Event Simulation (C) 1992-2010 Andras Varga, OpenSim Ltd.
    Version: 4.1, build: 100611-4b63c38, edition: Academic Public License -- NOT FOR COMMERCIAL USE
    See the license for distribution terms and warranty disclaimer
    Setting up Cmdenv...
    Loading NED files from /home/staff/omnetpp-4.1/samples/example7/createsensornode: 3
    Loading NED files from /home/staff/omnetpp-4.1/samples/example7/MiXiM/base: 17
    Loading NED files from /home/staff/omnetpp-4.1/samples/example7/MiXiM/examples: 23
    Loading NED files from /home/staff/omnetpp-4.1/samples/example7/MiXiM/modules: 40

    Preparing for running configuration General, run #0...
    Scenario: $repetition=0
    Assigned runID=General-0-20101005-10:32:08-8053
    Setting up network `Createsensornode'...
    Initializing...
    myNetwAddr 18
    myNetwAddr 26
    myNetwAddr 34
    myNetwAddr 42
    myNetwAddr 50
    myNetwAddr 58
    myNetwAddr 66
    myNetwAddr 74
    myNetwAddr 82
    myNetwAddr 90
    updatePosition: HostMove startPos: (150,200) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (250,100) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (250,200) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (50,100) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (150,180) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (150,200) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (250,100) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (250,200) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (50,100) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.
    updatePosition: HostMove startPos: (150,180) direction: (0,0) startTime: 0 speed: 0
    queueLength = 5 bitrate = 15360 backoff method = linear
    finished csma init stage 1.

    Running simulation...
    ** Event #1 T=0 Elapsed: 0.000s (0m 00s) 0% completed
    Speed: ev/sec=0 simsec/sec=0 ev/simsec=0
    Messages: created: 70 present: 70 in FES: 10
    ** Event #25 T=0.13649543428 Elapsed: 0.000s (0m 00s) 0% completed
    Speed: ev/sec=0 simsec/sec=0 ev/simsec=0
    Messages: created: 93 present: 91 in FES: 16

    <!> Error in module (PhyLayer) Createsensornode.node[3].nic.phy (id=45) at event #25, t=0.13649543428: Model error:

    Error: message for sending received, but radio not in state TX.
    End.

    Simulation terminated with exit code: 1
    Command line: /home/staff/omnetpp-4.1/samples/example7/createsensornode/createsensornode -r 0 -n /home/staff/omnetpp-4.1/samples/example7/createsensornode:/home/staff/omnetpp-4.1/samples/example7/MiXiM/base:/home/staff/omnetpp-4.1/samples/example7/MiXiM/examples:/home/staff/omnetpp-4.1/samples/example7/MiXiM/modules -l /home/staff/omnetpp-4.1/samples/example7/MiXiM/tests/testUtils/miximtestUtils -l /home/staff/omnetpp-4.1/samples/example7/MiXiM/base/miximbase -l /home/staff/omnetpp-4.1/samples/example7/MiXiM/tests/power/utils/powerTestUtils -l /home/staff/omnetpp-4.1/samples/example7/MiXiM/modules/miximmodules /home/staff/omnetpp-4.1/samples/example7/createsensornode/omnetpp.ini

    Working directory: /home/staff/omnetpp-4.1/samples/example7/createsensornode

    PATH=/home/staff/omnetpp-4.1/bin::/usr/java/jdk1.7.0/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/opt/real/RealPlayer:/opt/ns/bin:/opt/ns/tcl8.4.18/unix:/opt/ns/tk8.4.18/unix:/home/staff/omnetpp-4.1/bin:/home/staff/andras/omnetpp-2.3p1:/home/staff/LSU-SensorSimulator/src:/root/bin:/home/programmer/ns-allinone-2.33/bin:/home/programmer/ns-allinone-2.33/tcl8.4.18/unix:/home/programmer/ns-allinone-2.33/tk8.4.18/unix:/home/programmer/ns-allinone-2.33/xgraph-12.1/:/home/programmer/ns-allinone-2.33/ns-2.33/:/home/programmer/ns-allinone-2.33/nam-1.13/:/opt/real/RealPlayer:/home/staff/omnetpp-4.1/bin:/home/staff/andras/omnetpp-2.3p1:/home/staff/LSU-SensorSimulator/src
    LD_LIBRARY_PATH=/home/staff/omnetpp-4.1/lib::/home/staff/omnetpp-4.1/samples/example7/MiXiM/tests/testUtils:/home/staff/omnetpp-4.1/samples/example7/MiXiM/base:/home/staff/omnetpp-4.1/samples/example7/MiXiM/tests/power/utils:/home/staff/omnetpp-4.1/samples/example7/MiXiM/modules:/usr/java/jdk1.7.0/jre/lib/i386/client:/usr/java/jdk1.7.0/jre/lib/i386:/opt/ns/otcl-1.13:/opt/ns/lib:/opt/mobility-fw2.0p2/contrib/lib:/home/programmer/ns-allinone-2.33/otcl-1.13:/home/programmer/ns-allinone-2.33/lib:/opt/mobility-fw2.0p2/contrib/lib:/usr/lib/xulrunner-1.9:/usr/lib/xulrunner-1.9
    OMNETPP_IMAGE_PATH=/home/staff/omnetpp-4.1/images
    Last edited by va1234; 10-05-2010 at 05:16 AM. Reason: exact error

  2. #2
    Linux User ved's Avatar
    Join Date
    Jan 2008
    Location
    New Delhi
    Posts
    309
    welcome in Linux
    Can you post what is your exact error ?
    http://www.linuxforums.org/forum/new...ead-first.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •