Results 1 to 1 of 1
hi all, i have to put the error when i was running the simulation of wireless sensor network. error Error on parameter (n): Please enter a value between 1 and ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 10-05-2010 #1
- Join Date
- Oct 2010
error when executing wireless simulation
i have to put the error when i was running the simulation of wireless sensor network.
Error on parameter (n): Please enter a value between 1 and 300
usage: /home/staff/omnetpp-4.1/samples/example8/newNetwork/newNetwork -x int_size -y int_size -n int_nodes [-d 1-7] [-p 1-4] [-e double_energy] [-w 1-4] [-s int_seed] [-f tcl_name_file] [-h]
x : Sets map maximum X size (REQUIRED)
y : Sets map maximum Y size (REQUIRED)
n : Sets number of sensor nodes (REQUIRED)
d : Sets deployment: 1 - Grid (You need to set distance)
2 - Random (DEFAULT)
3 - One-by-one
4 - Two-by-two
5 - Three-by-three
6 - Properlant
7 - Cliff
k : Sets the distance between nodes (GRID)
p : Sets nodes position: 1 - ONE Position (DEFAULT)
2 - Two Positions
3 - Three Positions
4 - Four Positions
e : Sets maximum energy (DEFAULT=50.0)
i : Sets idle energy (DEFAULT=0.0001)
w : Sets number of energy levels : 1 - All nodes with same energy (DEFAULT)
2 - Two energy levels
3 - Three energy levels
4 - Four energy levels
s : Sets random seed
f : Sets tcl file name
h : Prints this help file
what is the solution???
i have also put the whole error of previous question. so please check and replay.