Hi all, I have made a virtual server configuration in my lab. I have an active server with two NIC cards
eth0:192.168.24.100
eth1:192.168.25.35
I dont have any backupserver and has two real servers
with 192.168.25.103 and 192.168.25.105.
I have started the httpd in both the real servers.
I have installed the ipvsadm, pulse, pirahna-gui.
I got confused with the pirahna-gui, so I had manually added the configuration file as follows:
serial_no = 25
primary = 192.168.24.100
service = lvs
backup_active = 1
backup = 0.0.0.0
heartbeat = 1
heartbeat_port = 539
keepalive = 4
deadtime = 12
network = nat
nat_router = 192.168.25.35 eth1:0
nat_nmask = 255.255.255.0
reservation_conflict_action = preempt
debug_level = NONE
virtual web {
active = 1
vip_nmask = 255.255.255.0
port = 80
persistent = 600
send = "GET / HTTP/1.0\r\n\r\n"
expect = "HTTP"
load_monitor = none
scheduler = wlc
protocol = tcp
timeout = 6
reentry = 15
quiesce_server = 0
server webserver1 {
address = 192.168.25.103
active = 1
weight = 100
}
server webserver2 {
address = 192.168.25.105
active = 1
weight = 100
}
}
I have started the pulse, linux shows the pulse is started, but I dont think the pulse is started..
Do I need to extra stuff related to iptables for ip-forwarding and ipvsadm for the real server stuff..
Also please anyone the method of configuration and testing the stuff
Please can anyone help I need for my project very urgently.

Thanks in advnce