Results 1 to 1 of 1
Values for VL and SW
Code:
root:# ifconfig eth0 up
eth0: ERROR while getting interface flags: No such device
vector6:/~
root:# lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 02-16-2011 #1Linux Newbie
- Join Date
- Nov 2005
- Location
- Philippines
- Posts
- 198
PPPOE in VL 6.0 does not connect. . .but it does in Slackware 12.0
Values for VL and SW
Code:root:# ifconfig eth0 up eth0: ERROR while getting interface flags: No such device vector6:/~ root:# lspci 00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 05) 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05) 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) 03:03.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 03:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 03:06.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 03:06.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 03:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) vector6:/~ root:# ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root:# cat resolv.conf (COPIED FROM SW) nameserver 208.67.222.222 nameserver 208.67.220.220 vector6://etc root:# cat resolv.conf.orig (ORIG FILE OF VL6.0) # Generated by dhcpcd for interface wlan0 search domain.actdsltmp nameserver 192.168.0.1 nameserver 205.171.3.65 root:# lsmod Module Size Used by vector6://etc SLACKWARE: root@slackerz:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:07:95:33:C1:B4 inet6 addr: fe80::207:95ff:fe33:c1b4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:95 errors:0 dropped:0 overruns:0 frame:0 TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6666 (6.5 KiB) TX bytes:9646 (9.4 KiB) Interrupt:20 Base address:0xc800 root@slackerz:~# lspci 00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 05) 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05) 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) 03:03.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 03:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 03:06.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 03:06.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 03:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) oot@slackerz:~# lsmod Module Size Used by bsd_comp 9600 0 ipv6 254496 10 ipt_LOG 10112 3 ppp_synctty 11392 0 ppp_async 13056 1 crc_ccitt 5888 1 ppp_async ppp_generic 26772 7 bsd_comp,ppp_synctty,ppp_async slhc 9856 1 ppp_generic snd_seq_dummy 6788 0 snd_seq_oss 32896 0 snd_seq_midi_event 10112 1 snd_seq_oss snd_seq 50640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 10508 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42784 0 snd_mixer_oss 18048 1 snd_pcm_oss xt_tcpudp 7040 6 nf_conntrack_ipv4 17676 0 xt_state 6016 0 nf_conntrack 52616 2 nf_conntrack_ipv4,xt_state nfnetlink 8856 2 nf_conntrack_ipv4,nf_conntrack iptable_filter 6400 1 ip_tables 14276 1 iptable_filter x_tables 15748 4 ipt_LOG,xt_tcpudp,xt_state,ip_tables pcmcia 34988 0 pcmcia_core 36500 1 pcmcia fuse 42516 4 capability 7304 0 commoncap 9344 1 capability lp 13736 0 parport_pc 27812 1 parport 34760 2 lp,parport_pc pcspkr 6528 0 psmouse 39048 0 nvidia 4710100 22 serio_raw 9220 0 8139too 25472 0 mii 8576 1 8139too snd_intel8x0 32412 5 snd_ac97_codec 98980 1 snd_intel8x0 ac97_bus 6016 1 snd_ac97_codec snd_pcm 72068 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd_timer 22532 3 snd_seq,snd_pcm snd 47204 17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 9824 1 snd snd_page_alloc 11528 2 snd_intel8x0,snd_pcm iTCO_wdt 12964 0 iTCO_vendor_support 7172 1 iTCO_wdt intel_agp 25116 1 shpchp 33172 0 agpgart 31432 2 nvidia,intel_agp ata_generic 9220 0 evdev 11904 1 root@slackerz:~# root@slackerz:~# cat /etc/resolv.conf nameserver 208.67.222.222 nameserver 208.67.220.220 root@slackerz:/etc/rc.d# ls -l rc.in* -rwxr-xr-x 1 root root 9237 2007-07-01 10:04 rc.inet1* -rw-r--r-- 1 root root 3543 2009-10-04 18:29 rc.inet1.conf -rwxr-xr-x 1 root root 4477 2006-09-21 10:44 rc.inet2* -rwxrwxrwx 1 root root 497 2003-09-12 11:27 rc.inetd* root@slackerz:/etc/rc.d# cat rc.inet1.conf # /etc/rc.d/rc.inet1.conf ============================================================================= # Config information for eth0: IPADDR[0]="" NETMASK[0]="" USE_DHCP[0]="yes" DHCP_HOSTNAME[0]=""1. did i missed something? 2. does the "no output" of lsmod in VL serves as one of the culprit?
1. did i missed something?
2. does the "no output" of lsmod in VL serves as one of the culprit?P4 1.8, 1G DDR ram, 64mb GF2 MX400, 80G WD and 40G Maxtor, ECS mobo. Playing XP,Slack 12.0 and Vector Linux 5.8 GOLD, STD 6.0 Zenwalk 4.6.1, OpenBSD 3.9
Reply With Quote 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
