Hello


actually when I connect laptop to my home internet I get this
as output through this command :

# /etc/init.d/networking start
Configuring network interfaces...Internet Systems Consortium DHCP Client
V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit

eth1: link down
Listening on LPF/eth1/00:1b:fc:c5:1a:12
Sending on LPF/eth1/00:1b:fc:c5:1a:12
Sending on Socket/fallback
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 10.128.0.1
DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPACK from 10.128.0.1
bound to 116.74.41.85 -- renewal in 378 seconds.
done.


there is no " SIOCADDRT: No such process " in the above connection

but in my college I get this :


Configuring network interfaces...Internet Systems Consortium DHCP Client
V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit
eth1: link down
Listening on LPF/eth1/00:23:54:a8:7f:26
Sending on LPF/eth1/00:23:54:a8:7f:26
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
DHCPOFFER from 192.168.10.1
DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPACK from 192.168.10.1
SIOCADDRT: No such process
bound to 192.168.10.27 -- renewal in 12520317 seconds.
done.



everything is ok except this " SIOCADDRT: No such process " and I am not
able to get this problem that why this is happening and also the result of
my route -n command is as follows :

# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1

it does not show the entire route table


whereas in my home network it shows this on route :

route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
116.74.40.0 0.0.0.0 255.255.248.0 U 0 0 0
eth1
0.0.0.0 116.74.40.1 0.0.0.0 UG 0 0 0
eth1


Please give me solution to this that what is this and how to get rid of
this.


Thank you