Dual Wan's CentOS "Adding More IPS"

[niceguy167]

I've been searching everywhere on the web for this.
I have dual nic's, I want to assign multiple static ips on each network
I already have it configured so that ISP 1
is eth0, eth0:0, and eth0:1 the network config is a block of statics
and I am using say 75.160.x.x, 75.160.x.y and 75.160.x.z it has a subnet mask of 255.255.255.248

isp 2 I have configured this nic as eth1, eth1:0 and eth1:1, I have also enabled tcp ip v4 ip forwarding in my sysctl file. and its subnetmask is 255.255.255.240
ips are 75.161.x.x, 75.161.x.y and 75.161.x.z
Also both networks have separate gateways and should use the separate gateways.

However whenever I enable eth1 both nic's no longer work eth0 dies and cannot be pinged from the internet. neither can eth1
So the question is how can I get both nic’s working and allowing both ips to function with the isps.
I am trying to move my mail accounts and a few virtual website to the new isp so I need each nic and ips to work there respected isps
also each network has its own router and gateway.

[ktech11]

Can you post the following:

ifconfig -a
route
cat /etc/sysconfig/static-routes

[niceguy167]

Sorry for a big wait on the info but I have been out of town. Here you are
Thanks again for your help
Steven

Ifconfig Looks Like This

eth0      Link encap:Ethernet  HWaddr 00:50:BA:B9:78:4F  
          inet addr:71.152.59.169  Bcast:71.152.59.175  Mask:255.255.255.248
          inet6 addr: fe80::250:baff:feb9:784f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3061719 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2428949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:706723615 (673.9 MiB)  TX bytes:977475547 (932.1 MiB)
          Interrupt:185 Base address:0x6000 

eth0:0    Link encap:Ethernet  HWaddr 00:50:BA:B9:78:4F  
          inet addr:71.152.59.170  Bcast:71.152.59.175  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:185 Base address:0x6000 

eth0:1    Link encap:Ethernet  HWaddr 00:50:BA:B9:78:4F  
          inet addr:71.152.59.171  Bcast:71.152.59.175  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:185 Base address:0x6000 

eth0:2    Link encap:Ethernet  HWaddr 00:50:BA:B9:78:4F  
          inet addr:71.152.59.172  Bcast:71.152.59.175  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:185 Base address:0x6000 

eth1      Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.17  Bcast:75.162.50.31  Mask:255.255.255.240
          inet6 addr: fd00::204:5aff:fe7c:3fcb/64 Scope:Global
          inet6 addr: fe80::204:5aff:fe7c:3fcb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:586 errors:0 dropped:0 overruns:0 frame:0
          TX packets:127 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:38832 (37.9 KiB)  TX bytes:7992 (7.8 KiB)
          Interrupt:201 Base address:0x8000 

eth1:0    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.18  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

eth1:1    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.19  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

eth1:2    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.20  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

eth1:3    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.21  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

eth1:4    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.22  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

eth1:5    Link encap:Ethernet  HWaddr 00:04:5A:7C:3F:CB  
          inet addr:75.162.50.23  Bcast:75.162.50.31  Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:201 Base address:0x8000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:600003 errors:0 dropped:0 overruns:0 frame:0
          TX packets:600003 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:361193178 (344.4 MiB)  TX bytes:361193178 (344.4 MiB)

sit0      Link encap:IPv6-in-IPv4  
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Route is

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
71.152.59.168   *               255.255.255.248 U     0      0        0 eth0
75.162.50.16    *               255.255.255.240 U     0      0        0 eth1
169.254.0.0     *               255.255.0.0     U     0      0        0 eth1
default         75.162.50.30    0.0.0.0         UG    0      0        0 eth1

There do not appear to be any static routes setup at this time
as both static-routes does not exist and /etc/sysconfig/network-scripts/ no route-interface or anything like that exists
This is Centos thanks again.
Steven

[ktech11]

When you say "eth0 dies" do you mean it goes down, or you just can't ping it from outside. Can you send pings from it? Your routing table shows your default gateway is only on the second ISP. I would put in some static routes to tell the server where to send traffic coming from each subnet.

[niceguy167]

When you say "eth0 dies" do you mean it goes down, or you just can't ping it from outside. Can you send pings from it? Your routing table shows your default gateway is only on the second ISP. I would put in some static routes to tell the server where to send traffic coming from each subnet.

I cannot ping it form outside the network and both eth1 and eth0 are offline at that point.
What is the settings to add the static routes for each adapter?
Thanks
Steven