Find the answer to your Linux question:
Results 1 to 10 of 10
Hi all, Hopefully someone will have the answer! I have just installed Linux Mint 13 with xfce desktop on a new pc and I am unable to get a connection ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    May 2010
    Posts
    11

    Internet Connecton


    Hi all,

    Hopefully someone will have the answer!

    I have just installed Linux Mint 13 with xfce desktop on a new pc and I am unable to get a connection to the Internet. I have some outputs for you:

    ifconfig -a
    eth0 Link encap:Ethernet HWaddr bc:5f:f4:03:b2:8f
    inet6 addr: fe80::be5f:f4ff:fe03:b28f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:155 dropped:0 overruns:154 frame:1
    TX packets:765 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:184647 (184.6 KB)
    Interrupt:43 Base address:0x4000

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:36 errors:0 dropped:0 overruns:0 frame:0
    TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2472 (2.4 KB) TX bytes:2472 (2.4 KB)

    dmesg
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-23-generic (buildd at crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=75503f77-2223-48ac-8c6d-fa22dcf088f6 ro quiet splash vt.handoff=7
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   Centaur CentaurHauls
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
    [    0.000000]  BIOS-e820: 00000000bffa0000 - 00000000bffb0000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bffb0000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68-VS3 FX, BIOS P1.20 10/07/2011
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
    [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
    [    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 000000042f000000 aka 17136M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000bffa0000
    [    0.000000]  0000000000 - 0080000000 page 1G
    [    0.000000]  0080000000 - 00bfe00000 page 2M
    [    0.000000]  00bfe00000 - 00bffa0000 page 4k
    [    0.000000] kernel direct mapping tables up to bffa0000 at 1fffd000-20000000
    [    0.000000] init_memory_mapping: 0000000100000000-000000042f000000
    [    0.000000]  0100000000 - 0400000000 page 1G
    [    0.000000]  0400000000 - 042f000000 page 2M
    [    0.000000] kernel direct mapping tables up to 42f000000 at bff9e000-bffa0000
    [    0.000000] RAMDISK: 364e8000 - 3726c000
    [    0.000000] ACPI: RSDP 00000000000f9df0 00014 (v00 ACPIAM)
    [    0.000000] ACPI: RSDT 00000000bffa0000 00040 (v01 100711 RSDT1046 20111007 MSFT 00000097)
    [    0.000000] ACPI: FACP 00000000bffa0200 00084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
    [    0.000000] ACPI: DSDT 00000000bffa0470 04C96 (v01  AS569 AS569111 00000111 INTL 20051117)
    [    0.000000] ACPI: FACS 00000000bffb0000 00040
    [    0.000000] ACPI: APIC 00000000bffa0390 000A0 (v01 100711 APIC1046 20111007 MSFT 00000097)
    [    0.000000] ACPI: MCFG 00000000bffa0430 0003C (v01 100711 OEMMCFG  20111007 MSFT 00000097)
    [    0.000000] ACPI: OEMB 00000000bffb0040 00072 (v01 100711 OEMB1046 20111007 MSFT 00000097)
    [    0.000000] ACPI: AAFT 00000000bffaa470 00027 (v01 100711 OEMAAFT  20111007 MSFT 00000097)
    [    0.000000] ACPI: HPET 00000000bffaa4a0 00038 (v01 100711 OEMHPET0 20111007 MSFT 00000097)
    [    0.000000] ACPI: SSDT 00000000bffaa4e0 00B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-000000042f000000
    [    0.000000] Initmem setup node 0 0000000000000000-000000042f000000
    [    0.000000]   NODE_DATA [000000042effb000 - 000000042effffff]
    [    0.000000]  [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041ea00000-ffff88042e5fffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x0042f000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000bffa0
    [    0.000000]     0: 0x00100000 -> 0x0042f000
    [    0.000000] On node 0 totalpages: 4124463
    [    0.000000]   DMA zone: 64 pages used for memmap
    [    0.000000]   DMA zone: 5 pages reserved
    [    0.000000]   DMA zone: 3914 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 16320 pages used for memmap
    [    0.000000]   DMA32 zone: 765920 pages, LIFO batch:31
    [    0.000000]   Normal zone: 52160 pages used for memmap
    [    0.000000]   Normal zone: 3286080 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x508
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    [    0.000000] ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 20, version 17, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] ACPI: IRQ14 used by override.
    [    0.000000] ACPI: IRQ15 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffb0000
    [    0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffe0000
    [    0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
    [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
    [    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
    [    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu  at ffff88042ec00000 s83072 r8192 d23424 u262144
    [    0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4055914
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=75503f77-2223-48ac-8c6d-fa22dcf088f6 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture  0 size 32 MB
    [    0.000000] Your BIOS doesn't leave a aperture memory hole
    [    0.000000] Please enable the IOMMU option in the BIOS setup
    [    0.000000] This costs you 64 MB of RAM
    [    0.000000] Mapping aperture over 65536 KB of RAM  b4000000
    [    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    [    0.000000] Memory: 16077648k/17547264k available (6566k kernel code, 1049412k absent, 420204k reserved, 6637k data, 920k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:16640 nr_irqs:744 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 132120576 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 4018.069 MHz processor.
    [    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.13 BogoMIPS (lpj=16072276)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004037] AppArmor: AppArmor initialized
    [    0.004038] Yama: becoming mindful.
    [    0.009295] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [    0.013558] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.015325] Mount-cache hash table entries: 256
    [    0.015431] Initializing cgroup subsys cpuacct
    [    0.015436] Initializing cgroup subsys memory
    [    0.015443] Initializing cgroup subsys devices
    [    0.015445] Initializing cgroup subsys freezer
    [    0.015446] Initializing cgroup subsys blkio
    [    0.015450] Initializing cgroup subsys perf_event
    [    0.015470] tseg: 0000000000
    [    0.015480] CPU: Physical Processor ID: 0
    [    0.015481] CPU: Processor Core ID: 0
    [    0.015483] mce: CPU supports 7 MCE banks
    [    0.016798] ACPI: Core revision 20110623
    [    0.018978] ftrace: allocating 27049 entries in 107 pages
    [    0.020597] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062646] CPU0: AMD FX(tm)-4100 Quad-Core Processor             stepping 02
    [    0.064003] Performance Events: AMD Family 15h PMU driver.
    [    0.064003] ... version:                0
    [    0.064003] ... bit width:              48
    [    0.064003] ... generic registers:      6
    [    0.064003] ... value mask:             0000ffffffffffff
    [    0.064003] ... max period:             00007fffffffffff
    [    0.064003] ... fixed-purpose events:   0
    [    0.064003] ... event mask:             000000000000003f
    [    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.064003] Booting Node   0, Processors  #1
    [    0.064003] smpboot cpu 1: start_ip = 9a000
    [    0.152029] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.152117]  #2
    [    0.152119] smpboot cpu 2: start_ip = 9a000
    [    0.244027] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.244084]  #3
    [    0.244086] smpboot cpu 3: start_ip = 9a000
    [    0.336032] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.336047] Brought up 4 CPUs
    [    0.336049] Total of 4 processors activated (32144.94 BogoMIPS).
    [    0.340161] devtmpfs: initialized
    [    0.341324] EVM: security.selinux
    [    0.341325] EVM: security.SMACK64
    [    0.341326] EVM: security.capability
    [    0.341414] PM: Registering ACPI NVS region at bffb0000 (196608 bytes)
    [    0.344398] print_constraints: dummy: 
    [    0.344434] RTC time:  8:05:23, date: 08/24/12
    [    0.344463] NET: Registered protocol family 16
    [    0.344556] Extended Config Space enabled on 1 nodes
    [    0.344570] ACPI: bus type pci registered
    [    0.344471] Trying to unpack rootfs image as initramfs...
    [    0.344627] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.344630] PCI: not using MMCONFIG
    [    0.344631] PCI: Using configuration type 1 for base access
    [    0.344633] PCI: Using configuration type 1 for extended access
    [    0.345549] bio: create slab <bio-0> at 0
    [    0.345549] ACPI: Added _OSI(Module Device)
    [    0.345549] ACPI: Added _OSI(Processor Device)
    [    0.345549] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.345549] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.345549] ACPI: EC: Look up EC in DSDT
    [    0.345971] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.350195] ACPI: Interpreter enabled
    [    0.350197] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.350214] ACPI: Using IOAPIC for interrupt routing
    [    0.350230] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.351203] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.378179] ACPI: No dock devices found.
    [    0.378181] HEST: Table not found.
    [    0.378183] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.378397] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.378558] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    [    0.378560] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    [    0.378562] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.378564] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.378566] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
    [    0.378568] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [    0.378572] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d07ff])
    [    0.378593] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
    [    0.378766] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
    [    0.378773] pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
    [    0.378808] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
    [    0.378819] pci 0000:00:01.1: reg 10: [io  0x0e00-0x0e3f]
    [    0.378835] pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
    [    0.378841] pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
    [    0.378869] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [    0.378874] pci 0000:00:01.1: PME# disabled
    [    0.378884] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
    [    0.378927] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
    [    0.378936] pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
    [    0.378972] pci 0000:00:02.0: supports D1 D2
    [    0.378974] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.378977] pci 0000:00:02.0: PME# disabled
    [    0.378987] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
    [    0.378998] pci 0000:00:02.1: reg 10: [mem 0xfebfec00-0xfebfecff]
    [    0.379041] pci 0000:00:02.1: supports D1 D2
    [    0.379043] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.379045] pci 0000:00:02.1: PME# disabled
    [    0.379064] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
    [    0.379106] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
    [    0.379116] pci 0000:00:05.0: reg 10: [mem 0xfebf8000-0xfebfbfff]
    [    0.379160] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [    0.379163] pci 0000:00:05.0: PME# disabled
    [    0.379183] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
    [    0.379205] pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
    [    0.379238] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
    [    0.379248] pci 0000:00:07.0: reg 10: [mem 0xfebfd000-0xfebfdfff]
    [    0.379252] pci 0000:00:07.0: reg 14: [io  0xe080-0xe087]
    [    0.379289] pci 0000:00:07.0: supports D1 D2
    [    0.379290] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.379294] pci 0000:00:07.0: PME# disabled
    [    0.379306] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
    [    0.379315] pci 0000:00:08.0: reg 10: [io  0xe000-0xe007]
    [    0.379319] pci 0000:00:08.0: reg 14: [io  0xdc00-0xdc03]
    [    0.379324] pci 0000:00:08.0: reg 18: [io  0xd880-0xd887]
    [    0.379328] pci 0000:00:08.0: reg 1c: [io  0xd800-0xd803]
    [    0.379332] pci 0000:00:08.0: reg 20: [io  0xd480-0xd48f]
    [    0.379337] pci 0000:00:08.0: reg 24: [mem 0xfebfc000-0xfebfcfff]
    [    0.379366] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
    [    0.379375] pci 0000:00:08.1: reg 10: [io  0xd400-0xd407]
    [    0.379379] pci 0000:00:08.1: reg 14: [io  0xd080-0xd083]
    [    0.379384] pci 0000:00:08.1: reg 18: [io  0xd000-0xd007]
    [    0.379388] pci 0000:00:08.1: reg 1c: [io  0xcc00-0xcc03]
    [    0.379392] pci 0000:00:08.1: reg 20: [io  0xc880-0xc88f]
    [    0.379397] pci 0000:00:08.1: reg 24: [mem 0xfebf3000-0xfebf3fff]
    [    0.379434] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
    [    0.379463] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.379466] pci 0000:00:09.0: PME# disabled
    [    0.379480] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
    [    0.379509] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.379512] pci 0000:00:0b.0: PME# disabled
    [    0.379524] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
    [    0.379554] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.379556] pci 0000:00:0c.0: PME# disabled
    [    0.379567] pci 0000:00:0d.0: [10de:03d6] type 0 class 0x000300
    [    0.379574] pci 0000:00:0d.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [    0.379580] pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.379585] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [    0.379592] pci 0000:00:0d.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
    [    0.379622] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
    [    0.379640] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
    [    0.379654] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
    [    0.379670] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
    [    0.379688] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
    [    0.379702] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
    [    0.379767] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    [    0.379772] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.379775] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.379777] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.379779] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
    [    0.379781] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [    0.379804] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    0.379828] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    [    0.379853] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    [    0.379865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.379977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [    0.380030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
    [    0.380061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
    [    0.380094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    [    0.380244]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.380479]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
    [    0.380481] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.384987] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    [    0.385084] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
    [    0.385178] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    [    0.385273] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    [    0.385366] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    [    0.385459] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    [    0.385552] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    [    0.385646] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
    [    0.385742] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
    [    0.385837] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
    [    0.385934] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
    [    0.386030] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    [    0.386126] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
    [    0.386222] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
    [    0.386316] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
    [    0.386412] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
    [    0.386508] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
    [    0.386622] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    [    0.386688] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.386688] vgaarb: loaded
    [    0.386688] vgaarb: bridge control possible 0000:00:0d.0
    [    0.386688] i2c-core: driver [aat2870] using legacy suspend method
    [    0.386688] i2c-core: driver [aat2870] using legacy resume method
    [    0.386688] SCSI subsystem initialized
    [    0.386745] libata version 3.00 loaded.
    [    0.386745] usbcore: registered new interface driver usbfs
    [    0.386745] usbcore: registered new interface driver hub
    [    0.386745] usbcore: registered new device driver usb
    [    0.386745] PCI: Using ACPI for IRQ routing
    [    0.393901] PCI: pci_cache_line_size set to 64 bytes
    [    0.393946] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    0.393948] reserve RAM buffer: 00000000bffa0000 - 00000000bfffffff 
    [    0.393950] reserve RAM buffer: 000000042f000000 - 000000042fffffff 
    [    0.394020] NetLabel: Initializing
    [    0.394022] NetLabel:  domain hash size = 128
    [    0.394023] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.394032] NetLabel:  unlabeled traffic allowed by default
    [    0.394047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
    [    0.394047] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [    0.396050] Switching to clocksource hpet
    [    0.401807] AppArmor: AppArmor Filesystem Enabled
    [    0.401821] pnp: PnP ACPI init
    [    0.401831] ACPI: bus type pnp registered
    [    0.401922] pnp 00:00: [bus 00-ff]
    [    0.401925] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.401926] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.401928] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.401930] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.401934] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.401935] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
    [    0.401937] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [    0.401972] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.401994] pnp 00:01: [dma 4]
    [    0.401996] pnp 00:01: [io  0x0000-0x000f]
    [    0.401997] pnp 00:01: [io  0x0081-0x0083]
    [    0.401999] pnp 00:01: [io  0x0087]
    [    0.402000] pnp 00:01: [io  0x0089-0x008b]
    [    0.402001] pnp 00:01: [io  0x008f]
    [    0.402003] pnp 00:01: [io  0x00c0-0x00df]
    [    0.402020] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.402026] pnp 00:02: [io  0x0061]
    [    0.402044] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.402051] pnp 00:03: [io  0x00f0-0x00ff]
    [    0.402062] pnp 00:03: [irq 13]
    [    0.402080] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.402631] pnp 00:04: [mem 0x000d0000-0x000d3fff window]
    [    0.402633] pnp 00:04: [mem 0x000d4000-0x000d7fff window]
    [    0.402635] pnp 00:04: [mem 0x000de000-0x000dffff window]
    [    0.402637] pnp 00:04: [io  0x0010-0x001f]
    [    0.402638] pnp 00:04: [io  0x0022-0x003f]
    [    0.402640] pnp 00:04: [io  0x0044-0x004d]
    [    0.402641] pnp 00:04: [io  0x0050-0x005f]
    [    0.402642] pnp 00:04: [io  0x0062-0x0063]
    [    0.402644] pnp 00:04: [io  0x0065-0x006f]
    [    0.402645] pnp 00:04: [io  0x0072-0x007f]
    [    0.402647] pnp 00:04: [io  0x0080]
    [    0.402648] pnp 00:04: [io  0x0084-0x0086]
    [    0.402649] pnp 00:04: [io  0x0088]
    [    0.402651] pnp 00:04: [io  0x008c-0x008e]
    [    0.402652] pnp 00:04: [io  0x0090-0x009f]
    [    0.402653] pnp 00:04: [io  0x00a2-0x00bf]
    [    0.402655] pnp 00:04: [io  0x00e0-0x00ef]
    [    0.402656] pnp 00:04: [io  0x04d0-0x04d1]
    [    0.402658] pnp 00:04: [io  0x0500-0x057f]
    [    0.402659] pnp 00:04: [io  0x0580-0x05ff]
    [    0.402661] pnp 00:04: [io  0x0800-0x087f]
    [    0.402662] pnp 00:04: [io  0x0880-0x08ff]
    [    0.402663] pnp 00:04: [io  0x0d00-0x0d7f]
    [    0.402665] pnp 00:04: [io  0x0d80-0x0dff]
    [    0.402666] pnp 00:04: [io  0x1100-0x117f]
    [    0.402668] pnp 00:04: [io  0x1180-0x11ff]
    [    0.402670] pnp 00:04: [mem 0xfec80000-0xfecfffff]
    [    0.402671] pnp 00:04: [mem 0xfefe0000-0xfefe01ff]
    [    0.402673] pnp 00:04: [mem 0xfefe1000-0xfefe1fff]
    [    0.402676] pnp 00:04: [mem 0xfee01000-0xfeefffff]
    [    0.402677] pnp 00:04: [mem 0xffb80000-0xffffffff]
    [    0.402730] system 00:04: [io  0x04d0-0x04d1] has been reserved
    [    0.402732] system 00:04: [io  0x0500-0x057f] has been reserved
    [    0.402734] system 00:04: [io  0x0580-0x05ff] has been reserved
    [    0.402736] system 00:04: [io  0x0800-0x087f] has been reserved
    [    0.402738] system 00:04: [io  0x0880-0x08ff] has been reserved
    [    0.402740] system 00:04: [io  0x0d00-0x0d7f] has been reserved
    [    0.402742] system 00:04: [io  0x0d80-0x0dff] has been reserved
    [    0.402744] system 00:04: [io  0x1100-0x117f] has been reserved
    [    0.402746] system 00:04: [io  0x1180-0x11ff] has been reserved
    [    0.402748] system 00:04: [mem 0x000d0000-0x000d3fff window] could not be reserved
    [    0.402750] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
    [    0.402753] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
    [    0.402755] system 00:04: [mem 0xfec80000-0xfecfffff] has been reserved
    [    0.402757] system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved
    [    0.402759] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved
    [    0.402761] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
    [    0.402763] system 00:04: [mem 0xffb80000-0xffffffff] could not be reserved
    [    0.402766] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402855] pnp 00:05: [mem 0xfed00000-0xfed00fff]
    [    0.402857] pnp 00:05: [irq 2 disabled]
    [    0.402864] pnp 00:05: [irq 8]
    [    0.402883] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.402903] pnp 00:06: [io  0x0070-0x0071]
    [    0.402922] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.402995] pnp 00:07: [mem 0xfec00000-0xfec00fff]
    [    0.402996] pnp 00:07: [mem 0xfee00000-0xfee00fff]
    [    0.403027] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.403030] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.403032] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.403054] pnp 00:08: [io  0x0060]
    [    0.403056] pnp 00:08: [io  0x0064]
    [    0.403063] pnp 00:08: [irq 1]
    [    0.403087] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.403288] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.403290] pnp 00:09: [io  0x0280-0x028f]
    [    0.403292] pnp 00:09: [io  0x0290-0x029f]
    [    0.403322] system 00:09: [io  0x0280-0x028f] has been reserved
    [    0.403324] system 00:09: [io  0x0290-0x029f] has been reserved
    [    0.403327] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.403365] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [    0.403396] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.403399] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.403535] pnp 00:0b: [mem 0x00000000-0x0009ffff]
    [    0.403536] pnp 00:0b: [mem 0x000c0000-0x000cffff]
    [    0.403538] pnp 00:0b: [mem 0x000e0000-0x000fffff]
    [    0.403539] pnp 00:0b: [mem 0x00100000-0xcfffffff]
    [    0.403541] pnp 00:0b: [mem 0xfec00000-0xffffffff]
    [    0.403579] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.403581] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.403583] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.403586] system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
    [    0.403588] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
    [    0.403590] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.403827] pnp: PnP ACPI: found 12 devices
    [    0.403829] ACPI: ACPI bus type pnp unregistered
    [    0.410675] PCI: max bus depth: 1 pci_try_num: 2
    [    0.410689] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    [    0.410695] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    0.410699] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    [    0.410704] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    [    0.410713] pci 0000:00:04.0: setting latency timer to 64
    [    0.410717] pci 0000:00:09.0: setting latency timer to 64
    [    0.410721] pci 0000:00:0b.0: setting latency timer to 64
    [    0.410724] pci 0000:00:0c.0: setting latency timer to 64
    [    0.410727] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.410729] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.410731] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.410732] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff]
    [    0.410734] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
    [    0.410736] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
    [    0.410738] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
    [    0.410739] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.410741] pci_bus 0000:01: resource 7 [mem 0xd0000000-0xdfffffff]
    [    0.410743] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
    [    0.410769] NET: Registered protocol family 2
    [    0.411187] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.412895] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.414894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.415128] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.415130] TCP reno registered
    [    0.415158] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [    0.415245] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [    0.415375] NET: Registered protocol family 1
    [    0.415606] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
    [    0.415620] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
    [    0.492045] pci 0000:00:02.0: PCI INT A disabled
    [    0.492231] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
    [    0.492244] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
    [    0.492271] pci 0000:00:02.1: PCI INT B disabled
    [    0.492315] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492364] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492424] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492482] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492541] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492605] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492673] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492746] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.492751] pci 0000:00:0d.0: Boot video device
    [    0.492763] PCI: CLS 64 bytes, default 64
    [    0.493192] PCI-DMA: Disabling AGP.
    [    0.493264] PCI-DMA: aperture base at b4000000 size 65536 KB
    [    0.493266] PCI-DMA: using GART IOMMU.
    [    0.493268] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    0.497290] perf: AMD IBS detected (0x000000ff)
    [    0.497458] audit: initializing netlink socket (disabled)
    [    0.497466] type=2000 audit(1345795522.492:1): initialized
    [    0.540557] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.595296] VFS: Disk quotas dquot_6.5.2
    [    0.595343] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.595746] fuse init (API version 7.17)
    [    0.595819] msgmni has been set to 31530
    [    0.596220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.596251] io scheduler noop registered
    [    0.596254] io scheduler deadline registered
    [    0.596277] io scheduler cfq registered (default)
    [    0.596354] pcieport 0000:00:09.0: setting latency timer to 64
    [    0.596379] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [    0.596411] pcieport 0000:00:0b.0: setting latency timer to 64
    [    0.596430] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [    0.596458] pcieport 0000:00:0c.0: setting latency timer to 64
    [    0.596477] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
    [    0.596521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.596540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.596634] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.596638] ACPI: Power Button [PWRB]
    [    0.596671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.596674] ACPI: Power Button [PWRF]
    [    0.596719] ACPI: acpi_idle registered with cpuidle
    [    0.598192] ERST: Table is not found!
    [    0.598194] GHES: HEST is not enabled!
    [    0.598254] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.613117] Freeing initrd memory: 13840k freed
    [    0.844411] Linux agpgart interface v0.103
    [    0.845590] brd: module loaded
    [    0.846200] loop: module loaded
    [    0.846370] pata_acpi 0000:00:06.0: setting latency timer to 64
    [    0.846548] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    [    0.846561] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    [    0.846572] pata_acpi 0000:00:08.0: setting latency timer to 64
    [    0.846577] pata_acpi 0000:00:08.0: PCI INT A disabled
    [    0.846734] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
    [    0.846743] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    [    0.846753] pata_acpi 0000:00:08.1: setting latency timer to 64
    [    0.846758] pata_acpi 0000:00:08.1: PCI INT B disabled
    [    0.846988] Fixed MDIO Bus: probed
    [    0.847004] tun: Universal TUN/TAP device driver, 1.6
    [    0.847005] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
    [    0.847055] PPP generic driver version 2.4.2
    [    0.847131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.847140] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
    [    0.847161] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    0.847163] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    0.847195] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    [    0.847213] ehci_hcd 0000:00:02.1: debug port 1
    [    0.847218] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    [    0.847235] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfebfec00
    [    0.856024] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [    0.856123] hub 1-0:1.0: USB hub found
    [    0.856126] hub 1-0:1.0: 10 ports detected
    [    0.856189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.856199] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
    [    0.856208] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    0.856211] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    0.856246] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [    0.856266] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000
    [    0.914108] hub 2-0:1.0: USB hub found
    [    0.914112] hub 2-0:1.0: 10 ports detected
    [    0.914171] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.914212] usbcore: registered new interface driver libusual
    [    0.914237] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    0.914239] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    0.914732] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.914845] mousedev: PS/2 mouse device common for all mice
    [    0.914980] rtc_cmos 00:06: RTC can wake from S4
    [    0.915106] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [    0.915144] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    [    0.915202] device-mapper: uevent: version 1.0.3
    [    0.915259] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
    [    0.915325] cpuidle: using governor ladder
    [    0.915433] cpuidle: using governor menu
    [    0.915434] EFI Variables Facility v0.08 2004-May-17
    [    0.915599] TCP cubic registered
    [    0.915671] NET: Registered protocol family 10
    [    0.916042] NET: Registered protocol family 17
    [    0.916051] Registering the dns_resolver key type
    [    0.916178] PM: Hibernation image not present or could not be loaded.
    [    0.916186] registered taskstats version 1
    [    0.948369]   Magic number: 8:176:69
    [    0.948449] rtc_cmos 00:06: setting system clock to 2012-08-24 08:05:23 UTC (1345795523)
    [    0.948477] powernow-k8: Found 1 AMD FX(tm)-4100 Quad-Core Processor             (4 cpu cores) (version 2.20.00)
    [    0.948506] powernow-k8: Core Performance Boosting: on.
    [    0.948548] powernow-k8:    0 : pstate 0 (4000 MHz)
    [    0.948550] powernow-k8:    1 : pstate 1 (3300 MHz)
    [    0.948551] powernow-k8:    2 : pstate 2 (2500 MHz)
    [    0.948553] powernow-k8:    3 : pstate 3 (1700 MHz)
    [    0.948554] powernow-k8:    4 : pstate 4 (1400 MHz)
    [    0.948849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.948852] EDD information not available.
    [    0.950952] Freeing unused kernel memory: 920k freed
    [    0.951130] Write protecting the kernel read-only data: 12288k
    [    0.957229] Freeing unused kernel memory: 1608k freed
    [    0.958091] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    0.961886] Freeing unused kernel memory: 1196k freed
    [    0.975003] udevd[101]: starting version 175
    [    1.002694] pata_amd 0000:00:06.0: version 0.4.1
    [    1.002729] pata_amd 0000:00:06.0: setting latency timer to 64
    [    1.003955] scsi0 : pata_amd
    [    1.005360] scsi1 : pata_amd
    [    1.006660] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    1.006663] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    1.006682] sata_nv 0000:00:08.0: version 3.5
    [    1.006707] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    [    1.006739] sata_nv 0000:00:08.0: setting latency timer to 64
    [    1.007778] scsi2 : sata_nv
    [    1.007880] scsi3 : sata_nv
    [    1.007999] ata3: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21
    [    1.008042] ata4: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21
    [    1.008062] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    [    1.008093] sata_nv 0000:00:08.1: setting latency timer to 64
    [    1.010574] scsi4 : sata_nv
    [    1.010655] scsi5 : sata_nv
    [    1.010803] ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
    [    1.010806] ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
    [    1.010828] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [    1.011033] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    [    1.011036] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    [    1.011040] forcedeth 0000:00:07.0: setting latency timer to 64
    [    1.168527] ata1.00: ATA-6: WDC WD800BB-55JKC0, 05.01C05, max UDMA/100
    [    1.168530] ata1.00: 156301488 sectors, multi 16: LBA 
    [    1.168538] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
    [    1.176486] ata1.00: configured for UDMA/100
    [    1.176610] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-55JK 05.0 PQ: 0 ANSI: 5
    [    1.176751] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.176790] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    1.176840] ata2: port disabled--ignoring
    [    1.176878] sd 0:0:0:0: [sda] Write Protect is off
    [    1.176880] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.176924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.279836]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 >
    [    1.280513] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.330441] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.416115] usb 2-5: new low-speed USB device number 2 using ohci_hcd
    [    1.476137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.484314] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN04, max UDMA/100
    [    1.496106] Refined TSC clocksource calibration: 4018.274 MHz.
    [    1.496119] Switching to clocksource tsc
    [    1.500309] ata5.00: configured for UDMA/100
    [    1.532859] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 at 1, addr bc:5f:f4:03:b2:8f
    [    1.532862] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
    [    1.650441] ata4: SATA link down (SStatus 0 SControl 300)
    [    1.654085] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN04 PQ: 0 ANSI: 5
    [    1.663944] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.663952] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.664226] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [    1.664347] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [    1.986427] ata6: SATA link down (SStatus 0 SControl 300)
    [    1.993387] input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
    [    1.993543] generic-usb 0003:15D9:0A33.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-5/input0
    [    1.993554] usbcore: registered new interface driver usbhid
    [    1.993556] usbhid: USB HID core driver
    [    2.856113] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [   16.152891] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.168885] udevd[308]: starting version 175
    [   16.219859] Adding 12287996k swap on /dev/sda5.  Priority:-1 extents:1 across:12287996k 
    [   16.221775] i2c i2c-0: nForce2 SMBus adapter at 0x600
    [   16.221780] ACPI: resource nForce2_smbus [io  0x0700-0x073f] conflicts with ACPI region SM00 [io 0x700-0x73f]
    [   16.221783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   16.224484] lp: driver loaded but no devices found
    [   16.226198] wmi: Mapper loaded
    [   16.226474] MCE: In-kernel MCE decoding enabled.
    [   16.228060] EDAC MC: Ver: 2.1.0
    [   16.229056] [drm] Initialized drm 1.1.0 20060810
    [   16.230221] AMD64 EDAC driver v3.4.0
    [   16.232155] fam15h_power 0000:00:18.4: Bogus value for ProcessorPwrWatts (processor_pwr_watts>=19647)
    [   16.235672] EDAC amd64: DRAM ECC disabled.
    [   16.235680] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [   16.235681]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [   16.235683]  (Note that use of the override may cause unknown side effects.)
    [   16.236978] VGA switcheroo: detected Optimus DSM method \ handle
    [   16.237234] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
    [   16.237238] nouveau 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22
    [   16.237243] nouveau 0000:00:0d.0: setting latency timer to 64
    [   16.238498] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
    [   16.242699] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
    [   16.287454] [drm] nouveau 0000:00:0d.0: ... appears to be valid
    [   16.287459] [drm] nouveau 0000:00:0d.0: BIT BIOS found
    [   16.287463] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.28
    [   16.287466] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1
    [   16.287468] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
    [   16.287472] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
    [   16.287474] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 942b0003
    [   16.287477] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
    [   16.287480] [drm] nouveau 0000:00:0d.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
    [   16.287483] [drm] nouveau 0000:00:0d.0:   1: 0x00001131: type 0x31 idx 1 tag 0x07
    [   16.287486] [drm] nouveau 0000:00:0d.0:   2: 0x00000110: type 0x10 idx 2 tag 0xff
    [   16.287488] [drm] nouveau 0000:00:0d.0:   3: 0x00000111: type 0x11 idx 3 tag 0xff
    [   16.287491] [drm] nouveau 0000:00:0d.0:   4: 0x00000113: type 0x13 idx 4 tag 0xff
    [   16.287497] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xD9C9
    [   16.287500] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
    [   16.287503] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
    [   16.287542] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDB17
    [   16.287545] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDB18
    [   16.287581] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDC9A
    [   16.287586] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDCE3
    [   16.768053] [drm] nouveau 0000:00:0d.0: 1 available performance level(s)
    [   16.768057] [drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz fanspeed 100%
    [   16.768063] [drm] nouveau 0000:00:0d.0: c:
    [   16.768207] [TTM] Zone  kernel: Available graphics memory: 8080582 kiB.
    [   16.768209] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
    [   16.768211] [TTM] Initializing pool allocator.
    [   16.768219] [drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM
    [   16.774425] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
    [   16.778243] [drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!!
    [   16.779770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   16.779771] [drm] No driver support for vblank timestamp query.
    [   16.779775] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
    [   16.903743] [drm] nouveau 0000:00:0d.0: allocated 1600x900 fb: 0x49000, bo ffff8804107bb400
    [   16.903806] fbcon: nouveaufb (fb0) is primary device
    [   16.903899] Console: switching to colour frame buffer device 200x56
    [   16.903918] fb0: nouveaufb frame buffer device
    [   16.903920] drm: registered panic notifier
    [   16.903925] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0
    [   16.904189] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
    [   16.904194] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
    [   16.904197] hda_intel: Disabling MSI
    [   16.904221] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [   17.644409] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
    [   17.908337] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input4
    [   17.908435] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
    [   17.908500] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [   18.099593] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [   18.385212] init: failsafe main process (608) killed by TERM signal
    [   18.476139] Bluetooth: Core ver 2.16
    [   18.476155] NET: Registered protocol family 31
    [   18.476157] Bluetooth: HCI device and connection manager initialized
    [   18.476160] Bluetooth: HCI socket layer initialized
    [   18.476161] Bluetooth: L2CAP socket layer initialized
    [   18.476166] Bluetooth: SCO socket layer initialized
    [   18.477670] Bluetooth: RFCOMM TTY layer initialized
    [   18.477675] Bluetooth: RFCOMM socket layer initialized
    [   18.477676] Bluetooth: RFCOMM ver 1.11
    [   18.485125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   18.485127] Bluetooth: BNEP filters: protocol multicast
    [   18.602818] ppdev: user-space parallel port driver
    [   18.772508] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
    [   19.494354] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
    [   19.494358] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
    [   29.520082] eth0: no IPv6 routers present
    [   77.792058] eth0: no IPv6 routers present
    [  125.904029] eth0: no IPv6 routers present
    [  194.304083] eth0: no IPv6 routers present
    [  242.704086] eth0: no IPv6 routers present
    [  281.304088] eth0: no IPv6 routers present
    [  299.816091] [Hardware Error]: Machine check events logged
    [  329.744082] eth0: no IPv6 routers present
    [  377.584028] eth0: no IPv6 routers present
    [  396.660178] usb 1-4: new high-speed USB device number 3 using ehci_hcd
    [  396.830264] Initializing USB Mass Storage driver...
    [  396.830501] scsi6 : usb-storage 1-4:1.0
    [  396.830659] usbcore: registered new interface driver usb-storage
    [  396.830663] USB Mass Storage support registered.
    [  396.885814] usbcore: registered new interface driver uas
    [  397.830290] scsi 6:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
    [  397.831489] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [  398.418332] sd 6:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
    [  398.419144] sd 6:0:0:0: [sdb] Write Protect is off
    [  398.419152] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [  398.420047] sd 6:0:0:0: [sdb] No Caching mode page present
    [  398.420055] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [  398.423522] sd 6:0:0:0: [sdb] No Caching mode page present
    [  398.423530] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [  398.424611]  sdb: sdb1
    [  398.427526] sd 6:0:0:0: [sdb] No Caching mode page present
    [  398.427537] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [  398.427545] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [  399.711473] EXT4-fs (sdb1): recovery complete
    [  399.950976] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [  418.800100] ------------[ cut here ]------------
    [  418.800112] WARNING: at /build/buildd/linux-3.2.0/net/sched/sch_generic.c:255 dev_watchdog+0x25a/0x270()
    [  418.800119] Hardware name: To Be Filled By O.E.M.
    [  418.800123] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out
    [  418.800128] Modules linked in: uas usb_storage parport_pc ppdev bnep rfcomm bluetooth binfmt_misc snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq nouveau snd_timer snd_seq_device ttm drm_kms_helper snd drm k10temp mac_hid fam15h_power edac_core i2c_algo_bit edac_mce_amd mxm_wmi wmi video soundcore snd_page_alloc lp i2c_nforce2 parport usbhid hid forcedeth sata_nv pata_amd
    [  418.800192] Pid: 0, comm: swapper/2 Not tainted 3.2.0-23-generic #36-Ubuntu
    [  418.800197] Call Trace:
    [  418.800200]  <IRQ>  [<ffffffff8106712f>] warn_slowpath_common+0x7f/0xc0
    [  418.800216]  [<ffffffff81067226>] warn_slowpath_fmt+0x46/0x50
    [  418.800225]  [<ffffffff81078553>] ? mod_timer+0x143/0x2f0
    [  418.800234]  [<ffffffff8155e22a>] dev_watchdog+0x25a/0x270
    [  418.800243]  [<ffffffff81136820>] ? bdi_arm_supers_timer+0x50/0x50
    [  418.800249]  [<ffffffff8155dfd0>] ? qdisc_reset+0x50/0x50
    [  418.800255]  [<ffffffff8155dfd0>] ? qdisc_reset+0x50/0x50
    [  418.800262]  [<ffffffff81076086>] call_timer_fn+0x46/0x160
    [  418.800269]  [<ffffffff8107713c>] ? cascade+0x7c/0xa0
    [  418.800275]  [<ffffffff8155dfd0>] ? qdisc_reset+0x50/0x50
    [  418.800282]  [<ffffffff810779d2>] run_timer_softirq+0x132/0x2a0
    [  418.800290]  [<ffffffff810950c5>] ? ktime_get+0x65/0xe0
    [  418.800298]  [<ffffffff8106e928>] __do_softirq+0xa8/0x210
    [  418.800305]  [<ffffffff8101a779>] ? read_tsc+0x9/0x20
    [  418.800312]  [<ffffffff8109c054>] ? tick_program_event+0x24/0x30
    [  418.800320]  [<ffffffff81666cec>] call_softirq+0x1c/0x30
    [  418.800327]  [<ffffffff81015305>] do_softirq+0x65/0xa0
    [  418.800334]  [<ffffffff8106ed0e>] irq_exit+0x8e/0xb0
    [  418.800341]  [<ffffffff8166768e>] smp_apic_timer_interrupt+0x6e/0x99
    [  418.800349]  [<ffffffff8166555e>] apic_timer_interrupt+0x6e/0x80
    [  418.800353]  <EOI>  [<ffffffff813941af>] ? arch_local_irq_enable+0x8/0xd
    [  418.800366]  [<ffffffff8109121a>] ? sched_clock_idle_wakeup_event+0x1a/0x20
    [  418.800373]  [<ffffffff81394cde>] acpi_idle_enter_simple+0xd3/0x115
    [  418.800381]  [<ffffffff81504a01>] cpuidle_idle_call+0xc1/0x280
    [  418.800388]  [<ffffffff8101222a>] cpu_idle+0xca/0x120
    [  418.800396]  [<ffffffff8163a7fa>] start_secondary+0xd9/0xdb
    [  418.800402] ---[ end trace e4254848a6db039a ]---
    [  418.800410] forcedeth 0000:00:07.0: eth0: Got tx_timeout. irq: 00000032
    [  418.800415] forcedeth 0000:00:07.0: eth0: Ring at 41049c000
    [  418.800420] forcedeth 0000:00:07.0: eth0: Dumping tx registers
    [  418.800429] forcedeth 0000:00:07.0: eth0:   0: 00000032 000000df 00000003 0003000d 00000000 00000000 00000000 00000000
    [  418.800440] forcedeth 0000:00:07.0: eth0:  20: 00000000 00000000 00000000 00000000 00000001 00000000 00000000 00000000
    [  418.800450] forcedeth 0000:00:07.0: eth0:  40: 0420e20e 0000a455 00002e20 00000000 00000000 00000000 00000000 00000000
    I would be greatful if any one can help.

    Kind regards.
    Last edited by jayd512; 08-24-2012 at 06:05 PM. Reason: added code tag

  2. #2
    Just Joined!
    Join Date
    Aug 2012
    Location
    Toronto
    Posts
    7
    Could it be something with the network connection?

    You have this line in the logs:
    [ 16.152891] ADDRCONF(NETDEV_UP): eth0: link is not ready
    You should see 'link is up' or something similar.
    Last edited by oz; 08-24-2012 at 06:02 PM. Reason: signature removal

  3. #3
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Hi, tranzed.
    Are you trying for a wired connection? Or wireless?
    I wireless, take a look at this page, and post back here with all requested information.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  4. #4
    Just Joined!
    Join Date
    May 2010
    Posts
    11
    Thanks for your in put so far.

    This is a wired connection.

    With this line:
    eth0: no IPv6 routers present
    Would it have any things to do with the differences between ipv4 and ipv6
    on the new hardware?

    I would be greatful if any one can help.

    Kind regards.

  5. #5
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    It might make the difference. Try disabling IPv6. See here.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  6. #6
    Just Joined!
    Join Date
    May 2010
    Posts
    11
    Thanks Jay,

    I see this works for some but not others, I followed the instructions and this did not work for me.

    Is there another way to disable ipv6 do you know?

    Kind regards.

  7. #7
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    I see that the forcedeth module is loading. Very common NIC driver, but I'm wondering if it's the right one.
    Could you post the output of
    Code:
    lspci -knn
    lsmod
    And just for giggles:
    Code:
    rfkill list all
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  8. #8
    Just Joined!
    Join Date
    Aug 2012
    Location
    Toronto
    Posts
    7
    Quote Originally Posted by tranzed View Post
    This is a wired connection.
    Do you have link?
    Can you check that same cable on another computer?

    Also, reboot your computer and try this:
    service network-manager stop
    rm /var/lib/NetworkManager/NetworkManager.state
    service network-manager start

    Eyal

  9. #9
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Quote Originally Posted by eyal_tst View Post
    Do you have link?
    Can you check that same cable on another computer?
    I was starting to wonder the same thing.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  10. #10
    Just Joined!
    Join Date
    May 2010
    Posts
    11
    Thanks guys,

    I just tried that Eyal and got; network-manager start/running, process 2052 but still not connecting.

    I have tried different cables on different router ports and the other pc's are fine.

    Would it be that the router is not IPv6 compatable and the NIC will not run IPv4?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •