Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
I removed the Broadcom Azurewave combo wifi/bluetooth half mini PCI card. I am not hard wired to ethernet. To my knowledge, my netbook does not have 3G or Wimax. Yet, ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Oct 2012
    Posts
    7

    No network device yet network detected


    I removed the Broadcom Azurewave combo wifi/bluetooth half mini PCI card. I am not hard wired to ethernet. To my knowledge, my netbook does not have 3G or Wimax. Yet, diagnostic tests detect network activity and shared directories which cannot be opened. Am I being cracked? How can I disable loopback?

    Diagnostic tool in live CD of Lightweight Portable Security detected ipv6 size 213688 used by 10.

    From DMESG with Fedora installed

    [ 1.219628] Initializing network drop monitor service
    [ 2.473751] usb 1-6: Manufacturer: Azurewave

    [ 0.209090] NET: Registered protocol family 2
    [ 0.209219] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.209512] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.210422] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.210848] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.210855] TCP: reno registered
    [ 0.210865] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.210882] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.211132] NET: Registered protocol family 1
    [ 1.120148] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

    Network detected by HardInfo in live CD of Parted Magic:

    Network Interfaces
    lo 0.06MiB 0.06MiB 127.0.0.1

    IP Connections
    Connections
    0.0.0.0:704 LISTEN 0.0.0.0:* tcp
    0.0.0.0:37 0.0.0.0:* udp
    0.0.0.0:38053 LISTEN 0.0.0.0:* tcp
    0.0.0.0:7 0.0.0.0:* udp
    0.0.0.0:54056 LISTEN 0.0.0.0:* tcp
    0.0.0.0:13 0.0.0.0:* udp
    0.0.0.0:111 0.0.0.0:* udp
    0.0.0.0:6000 LISTEN 0.0.0.0:* tcp
    0.0.0.0:22 LISTEN 0.0.0.0:* tcp
    0.0.0.0:23 LISTEN 0.0.0.0:* tcp
    :::6000 LISTEN :::* tcp
    :::22 LISTEN :::* tcp
    0.0.0.0:696 0.0.0.0:* udp
    0.0.0.0:701 0.0.0.0:* udp
    0.0.0.0:52456 0.0.0.0:* udp
    0.0.0.0:7 0.0.0.0:* udp
    0.0.0.0:13 0.0.0.0:* udp
    0.0.0.0:59405 0.0.0.0:* udp
    0.0.0.0:37 0.0.0.0:* udp
    0.0.0.0:111 0.0.0.0:* udp
    127.0.0.1:123 0.0.0.0:* udp
    0.0.0.0:123 0.0.0.0:* udp
    ::1:123 :::* udp
    :::123 :::* udp

    Routing Table
    IP routing table
    127.0.0.0 / 0.0.0.0 255.0.0.0 U lo
    ARP Table
    ARP Table
    DNS Servers
    Name servers
    Statistics
    IP
    714 Requests sent out
    0 Incoming packets discarded
    0 Incoming packets discarded
    714 Requests sent out
    714 Requests sent out
    ICMP
    336 ICMP messages sent
    0 ICMP messages failed
    336 ICMP messages sent
    0 ICMP messages failed
    ICMPMSG

    TCP
    3 Resets sent
    0 Bad segments received.
    3 Resets sent
    0 Bad segments received.
    0 Bad segments received.
    6 Segments send out
    6 Segments send out
    0 Bad segments received.
    0 Bad segments received.
    3 Resets sent

    UDP
    38 Packets received
    336 Packets to unknown port received.
    0 Packet receive errors
    374 Packets sent
    UDPLITE

    Shared Directories
    SAMBA Cannot open etc/samba/smb.conf
    NFS

  2. #2
    Trusted Penguin
    Join Date
    May 2011
    Posts
    4,353
    i don't see any network devices.

    the kernel stuff listed in dmesg is just kernel networking subsystem starting up - it doesn't mean you've got a network device.

    the loopback device isn't a physical device and you do not want to disable it anyway. there are too many dependencies on it. it is what is using the ip address 127.0.0.1, which you see in your routing table, btw.

    there seem to be a lot of network services (ssh, telnet, ftp, judging by the open ports) running for some reason, but again, that doesn't mean there is network connectivity to your box.

    to be really sure, you can post the output of the following commands here:

    Code:
    lspci
    Code:
    lsusb
    Code:
    ifconfig
    Code:
    iwconfig
    Code:
    ls /sys/class/net

  3. #3
    Just Joined!
    Join Date
    Oct 2012
    Posts
    7
    I tried to enter the logs into the boxes you set up, but there was no option to do so. Here are the logs. I appreciate your

    review and advice.

    lspci

    00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
    00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
    00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
    00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
    00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)

    lsusb

    Bus 001 Device 003: ID 13d3:5702 IMC Networks
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    ifconfig

    [04:48] user@pc ~ $ ifconfig
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
    inet 127.0.0.1 netmask 255.0.0.0
    loop txqueuelen 0 (Local Loopback)
    RX packets 8 bytes 496 (496.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 8 bytes 496 (496.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    iwconfig

    lo no wireless extensions

    ls /sys/class/net

    lo

  4. $spacer_open
    $spacer_close
  5. #4
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Looking at that output, you don't have any network activity... cuz you have no active network adapters.
    No net activity means only one thing... you can't be hacked!
    After all, the only safe computer on the net... is the one that's not on the net.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  6. #5
    Trusted Penguin
    Join Date
    May 2011
    Posts
    4,353
    Right, what Jay said.

    That IMC Networks thing on your USB bus was interesting, but it turns out its just a webcam, at least according to this USB ID database.

    To make the boxes in your post, highlight your text and then click the # icon in the tool bar above the text box in which you're typing.

  7. #6
    Just Joined!
    Join Date
    Oct 2012
    Posts
    7
    Thank you Jay512 and atreyu for reviewing my logs. Could you please also review the cpu and memory logs posted below? My abuser hired investigators and crackers. They broke into my car and storage unit where my netbooks were. They swapped my harddrives. I think they could have also swapped my motherboards. Jack Alter's crackers infected my BIOS, graphic card and HPA in my hard drive with firmware rootkits. After flashing the graphic card and repeatedly flashing the BIO and wiping the HPA with internal Secure Erase, my netbook and removable media are still infected. Navratil in Ultimate Boot CD and Hiren's Boot CD detects a "virus in memory."

    Previously, encrypted frameless packets were being sent ad hock to a Roadrunner IP address in northern Virginia. I would attach some of the BIN files of the packets if this forum allowed uploading attachments.

    Jack's crackers still have complete remote control over my netbooks. I think his controllers either have taken complete control over one of the cores of my dual core Atom N570 processor or installed an additional processor on the motherboard and/or is using Intel's virtualization. Bank1 of memory has been compromised. I think they are hiding network activity from my OS.

    I ran three memory tests on Asus 1015PX in October 2012: Hardware Detection Tool, MBR86+, lshd tool and Diagnostic in Lightweight Portable Security live CD. All three tests could not detect the size, width and clock of bank:1. DIMM1 could not be detected. Lightweight Portable Security could not detect memory information for cpu:1.

    Hardware Detection Tool in Parted Magic

    Code:
    Memory BANK 0, Form factor: DIMM, type: other, Type details: synchronous, speed 667 MHz, size 1024 MB Device set: none, Device location: DIMM0, bank location: BANK0, total width 64 bits, data width 64 bits
    
    Memory BANK 1: Form factor DIMM, Type unknown, type detail unknown, speed unknown, size: free, device set none, Device location: DIMM1, bank location: BANK1, total width unknown 
    
    e80: low memory 15 MiB, high memory 997 MiB
    
    88 information: 63 MiB
    
    memory > run test> MemTest 86+ v.4.2.0.0
    
    L1 cache 24k 20574 MB
    L2 cache 512k 10547 MB
    L3 cache none
    Memory 1013M 1937 MB
    
    select C for Configuration, select 5 DMI Memory Device Information:
    
    DIMM0 size 1024, speed 667, type other, form DIMM, mapped to 00003ffffc00
    
    DIMM1 size empty, speed unknown, type unknown, mapped to unknown
    
    lshd Tool
    
    lshd tool also cannot detect size, width and clock of bank:1. 
    
       *-memory
              description: System Memory
              physical id: 15
              slot: System board or motherboard
              size: 1GiB
    
            *-bank:0
                description: DIMM Synchronous 667 MHz (1.5 ns)
                 product: ModulePartNumber00
                 vendor: Manufacturer00
                 physical id: 0
                 serial: SerNum00
                 slot: DIMM0
                 size: 1GiB
                 width: 64 bits
                 clock: 667MHz (1.5ns)
    
            *-bank:1
                 description: DIMM [empty]
                 product: ModulePartNumber01
                vendor: Manufacturer01
                 physical id: 1
                 serial: SerNum01
                 slot: DIMM1
    
    (Missing size, width and clock of bank:1)
    Last edited by jayd512; 10-13-2012 at 08:49 PM. Reason: added [CODE] tags

  8. #7
    Just Joined!
    Join Date
    Oct 2012
    Posts
    7
    DIAGNOSTIC IN LIGHTWEIGHT PORTABLE SECURITY

    Code:
                              memory      DIMM [empty]
    
    cpu@1               processor   
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
    
    (Missing speed, memory cache and stats on performance for cpu1.)
    HARDWARE DETECTION TOOL IN PARTED MAGIC

    Code:
    Main Processor (4 logical/4 physical)
    CPU cores: 1
    CPU enabled: 2
    CPU threads: 4
    L1 cache 0K + 0K (I + D)
    L2 cache 512k
    
    (Hardware Detection Tool detected only one core, whereas N570 has two cores. Hardware Detection Tool detected two enabled CPUs whereas there should be 4.  L1 cache is zero.)
    Diagnostic test by Lightweight Portable Security LPS-1.3.6_public_deluxe_20120914

    Code:
    Bus info          Device  Class       Description
    
    =================================================
                              system      1015PX (1015PX)
                              bus         1015PE
                              memory      64KiB BIOS
    
    cpu@0               processor   Intel(R) Atom(TM) CPU N570   @ 1.66GHz
    
                              memory      48KiB L1 cache
                              memory      1MiB L2 cache
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
                              memory      1GiB System Memory
                              memory      1GiB DIMM Synchronous 667 MHz (1.5 ns)
                              memory      DIMM [empty]
    
    cpu@1                     processor   
    
    (Missing vendor ID and model name of cpu1)
    
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
                              processor   Logical CPU
    
    (Missing speed, system memory, memory cache and stats on performance for cpu1.)
    LSHW TOOL IN PARTED MAGIC LIVE CD

    Code:
    *-cpu:0
    
              description: CPU
              product: Intel(R) Atom(TM) CPU N570   @ 1.66GHz
              vendor: Intel Corp.
              physical id: 4
              bus info: cpu@0
              version: 6.12.10
              serial: 0001-06CA-0000-0000-0000-0000
              slot: CPU 1
              size: 1GHz
              capacity: 1GHz
              width: 64 bits
              clock: 167MHz
      
              capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm tpr_shadow vnmi flexpriority cpufreq
          
    (Capabilities is missing lm which should be between nx and constant.)
    
    (Capabilities has flags that are not preinstalled in Asus 1015PX that are posted at openbenchmarking.org: x86-64 boot, fpu_exception, wp, sep, dtherm and cpufreq.  cpufreq_ondemand is a dynamic cpufreq governor for Low Latency Frequency Tranition capable processors.)            
           
              configuration: cores=2 enabledcores=2 id=3 threads=4
         
            *-cache:0
                 description: L1 cache
                 physical id: 5
                 slot: L1-Cache
                 size: 48KiB
                 capacity: 48KiB
                 capabilities: internal write-back data
    
            *-cache:1
                 description: L2 cache
                 physical id: 6
                 slot: L2-Cache
                 size: 1MiB
                 capacity: 1MiB
                 capabilities: internal write-back unified
         
            *-logicalcpu:0
                 description: Logical CPU
                 physical id: 3.1
                 width: 64 bits
                 capabilities: logical
          
            *-logicalcpu:1
                 description: Logical CPU
                 physical id: 3.2
                 width: 64 bits
                 capabilities: logical
      
            *-logicalcpu:2
                 description: Logical CPU
                 physical id: 3.3
                 width: 64 bits
                 capabilities: logical
           
            *-logicalcpu:3
                 description: Logical CPU
                 physical id: 3.4
                 width: 64 bits
                 capabilities: logical
        
         *-memory
              description: System Memory
              physical id: 15
              slot: System board or motherboard
              size: 1GiB
    
            *-bank:0
                 description: DIMM Synchronous 667 MHz (1.5 ns)
                 product: ModulePartNumber00
                 vendor: Manufacturer00
                 physical id: 0
                 serial: SerNum00
                 slot: DIMM0
                 size: 1GiB
                 width: 64 bits
                 clock: 667MHz (1.5ns)
        
            *-bank:1
                 description: DIMM [empty]
                 product: ModulePartNumber01
                 vendor: Manufacturer01
                 physical id: 1
                 serial: SerNum01
                 slot: DIMM1
    
    (Bank:1 is missing size, width and clock.)
    
    *-cpu:1
              physical id: 1
    
    (Missing vendor ID and model name of cpu1)          
            
              bus info: cpu@1
              version: 6.12.10
              serial: 0001-06CA-0000-0000-0000-0000
              size: 1GHz
              capacity: 1GHz
    
    (Missing slot, width and clock of cpu1.)
    
              capabilities: vmx ht cpufreq
           
    (Capabilities is missing: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dts tpr_shadow vnmi flexpriority. 
    
    (Capabilities has cpufreq which is not preinstalled.  cpufreq_ondemand is a dynamic cpufreq governor for Low Latency Frequency Tranition capable processors.)
    
              configuration: id=3
             
    (Configuration is missing: number of cores, number of enabled cores and number of threads.)
    
    (Missing cache :0 and cache :1 of cpu1.)
    
            *-logicalcpu:0
                 description: Logical CPU
                 physical id: 3.1
                 capabilities: logical
            *-logicalcpu:1
                 description: Logical CPU
                 physical id: 3.2
                 capabilities: logical
            *-logicalcpu:2
                 description: Logical CPU
                 physical id: 3.3
                 capabilities: logical
            *-logicalcpu:3
                 description: Logical CPU
                 physical id: 3.4
                 capabilities: logical
    
    (Missing system memory, bank:0 and bank:1 for cpu:1)
    
    (Missing specifications of cpu2 and cpu3.)
    HARDINFO IN PARTED MAGIC

    Code:
    Processor: 4x Intel(R) Atom(TM) CPU N570 @ 1.66 GHz
    
    (4x means ?)
    
    Intel(R) Atom(TM) CPU N570 @ 1.66GHz  1667.00MHz 
    Intel(R) Atom(TM) CPU N570 @ 1.66GHz 1000.00MHz
    Intel(R) Atom(TM) CPU N570 @ 1.66GHz 1667.00MHz
    Intel(R) Atom(TM) CPU N570 @ 1.66GHz 1000.00MHz
    
    (Missing specifications on these processors.)
    Last edited by jayd512; 10-13-2012 at 08:50 PM. Reason: added [CODE] tags

  9. #8
    Linux Guru Jonathan183's Avatar
    Join Date
    Oct 2007
    Posts
    3,043
    Quote Originally Posted by freebirds View Post
    or installed an additional processor on the motherboard
    if you believe this to be the case buy another netbook

  10. #9
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    After looking through all of that, I came to the same thought.
    Sometimes you gotta just cut the losses and get replacement gear.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  11. #10
    Just Joined!
    Join Date
    Oct 2012
    Posts
    7
    This is my replacement netbook. This Asus 1015PX is my fifth netbook. Jack's investigators keep tracking where I relocate to and gain physical access to my netbooks even when they are locked up. They are adept at picking locks. I am trying to figure out what they are doing and how they are going it so I can prevent them from continuing to do it.

    Are the memory logs and processors I posted normal? Any more tests to run?

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •