Linksys WPC54G V2 Adapter Doesn't Connect

[cheetahman]

The power light is on but it doesn't connect to the internet.The router is a Linksys WRT54G and have checked every settings on the router and through Yast Network Configuration also have checked the DriverLoader Website and it still doesn't work

[loft306]

heh i have the same nic actualy im on it rite now it works great with the ndiswrapper here is the l link to the directions for installing it and where to get the drivers for your nic...use the ones that the list of drivers says to use not the ones on your windows driver cd...better results!
[/url]http://ndiswrapper.sourceforge.net/phpwiki/index.php/Installation?PHPSESSID=a6fcfc3d1cc4e81a9b98b64304a bfbbf[url]and the list of drivers is a link on that page.....and use the

lspci -n

&

lspci

to fine the pci id of the nic then use that to get the proper driver from where the list links u to get it.
Also the ndiswrapper might already be in suse but just not configured!
i know it is included with SuSE 9.2

then after the nic is configged and the module loaded you need to start the nic the same way that you start anyother nic

[cheetahman]

I think driverloader is way easier and i have checked the faq on the driverloader website i think its a problem with the Router not detecting it.

[cusco]

Hello!! Im using ubuntu and I also have the wcp54g linksys pci adaptor

On device manager it detects my wireless device...

I go to networks settings

and I put in th0 as my device
.
.
root@ubuntu:/home/cusco # ../../sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:08:0D:AB:E0:F5
inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::208:dff:feab:e0f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5367 errors:0 dropped:0 overruns:0 frame:0
TX packets:4970 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1794960 (1.7 MiB) TX bytes:495731 (484.1 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32578 errors:0 dropped:0 overruns:0 frame:0
TX packets:32578 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2375730 (2.2 MiB) TX bytes:2375730 (2.2 MiB)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
.
.

then I put the ssid which is linksys (it is on the router page)

and I put the automatic dchp (I could do it by hand thats not the problem)

I activate it... bu as soon as I take the cable out it won't connect..

I reboot and the only connection is the wireless but it just doesn't work

help me!

thanks in advance