Hi - Im trying to install ACX100 drivers from http://acx100.sourceforge.net/

I am using the guide from that site by Craig

Details of failing--->>>

-Distribution : Linux Fedora Core 3
-Device : US Robotics USR805416
-The results of typing uname -r : 2.6.9-1.667
-The results of typing lspci -n in your root-console (with the card
plugged in or installed) :

00:00.0 Class 0600: 8086:7190 (rev 03)
00:01.0 Class 0604: 8086:7191 (rev 03)
00:07.0 Class 0601: 8086:7110 (rev 02)
00:07.1 Class 0101: 8086:7111 (rev 01)
00:07.2 Class 0c03: 8086:7112 (rev 01)
00:07.3 Class 0680: 8086:7113 (rev 02)
00:08.0 Class 0280: 104c:9066
00:0a.0 Class 0401: 1102:0002 (rev 07)
00:0a.1 Class 0980: 1102:7002 (rev 07)
01:00.0 Class 0300: 1002:5446

The results of typing lsmod in your root-console:

Module Size Used by
nls_utf8 1985 2
r128 97221 2
parport_pc 24705 1
lp 11565 0
parport 41737 2 parport_pc,lp
autofs4 24005 0
i2c_dev 10433 0
i2c_core 22081 1 i2c_dev
sunrpc 160421 1
ipt_REJECT 6465 1
ipt_state 1857 3
ip_conntrack 40693 1 ipt_state
iptable_filter 2753 1
ip_tables 16193 3 ipt_REJECT,ipt_state,iptable_filter
md5 4033 1
ipv6 232577 8
uhci_hcd 31449 0
emu10k1_gp 3649 0
gameport 4801 1 emu10k1_gp
snd_emu10k1 93769 2
snd_rawmidi 26725 1 snd_emu10k1
snd_pcm_oss 47609 0
snd_mixer_oss 17217 2 snd_pcm_oss
snd_pcm 97993 2 snd_emu10k1,snd_pcm_oss
snd_timer 29765 1 snd_pcm
snd_seq_device 8137 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 64401 1 snd_emu10k1
snd_page_alloc 9673 2 snd_emu10k1,snd_pcm
snd_util_mem 4801 1 snd_emu10k1
snd_hwdep 9413 1 snd_emu10k1
snd 54053 11
snd_emu10k1,snd_rawmidi,snd_pcm_oss,snd_mixer_oss, snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,sn d_hwdep
soundcore 9889 2 snd
floppy 58609 0
dm_snapshot 17029 0
dm_zero 2369 0
dm_mirror 23341 2
ext3 116809 2
jbd 74969 1 ext3
dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror

A brief description of when/where things went wrong, or what exactly
is not working:
-> I have sucessfully followed your tutorial a few days ago with the
same setup and it worked perfectly. However, I have just reinstalled
Fedora 3 and I not get error messages when typing make in the
/home/alan/acx100-0.2.0pre8_plus_fixes_45. Could this be because I
forgot to log in as root the first time i tried this command. I have
done a make clean command and tried again in root to no avail.

Any relevant errors you may have received during the process :

Kernel configuration found, performing sanity checks
All of the following items are required by the driver:
Loadable modules support is enabled.
Wireless LAN (non-hamradio) support is enabled.
Wireless extensions support is enabled.
The following is needed for PCMCIA/CardBus cards:
PCMCIA support is enabled.
CardBus support is enabled.
The following is needed for USB card support:
USB support is enabled.
The following is needed for PCI card support:
PCI support is enabled.
Kernel configuration satisfies the minimum requirements, continuing.
Wireless header file is WIRELESS_EXT version 16.
Running linux 2.6.9-1.667
Compile info: will choose to use code infrastructure for NEWER
wireless extension interface version (>= 13)
Symmetric multiprocessing support (CONFIG_SMP) is disabled.
make -C src
make[1]: Entering directory `/home/alan/acx100-0.2.0pre8_plus_fixes_45/src'
if test -n ; then \
mkdir -p /home/alan/acx100-0.2.0pre8_plus_fixes_45/src/tmp; \
cp /lib/modules/2.6.9-1.667/build/.config
/home/alan/acx100-0.2.0pre8_plus_fixes_45/src/tmp; \
fi
# use "make V=1" to see full compile execution
make -C /lib/modules/2.6.9-1.667/build
SUBDIRS=/home/alan/acx100-0.2.0pre8_plus_fixes_45/src \
MODVERDIR=/home/alan/acx100-0.2.0pre8_plus_fixes_45/src
WLAN_HOSTIF=WLAN_PCI modules
/lib/modules/2.6.9-1.667/build/scripts/gcc-version.sh: line 11: gcc:
command not found
/lib/modules/2.6.9-1.667/build/scripts/gcc-version.sh: line 12: gcc:
command not found
make[2]: Entering directory `/lib/modules/2.6.9-1.667/build'
CC [M] /home/alan/acx100-0.2.0pre8_plus_fixes_45/src/acx100.o
/bin/sh: gcc: command not found
make[3]: *** [/home/alan/acx100-0.2.0pre8_plus_fixes_45/src/acx100.o] Error 127
make[2]: *** [_module_/home/alan/acx100-0.2.0pre8_plus_fixes_45/src] Error 2
make[2]: Leaving directory `/lib/modules/2.6.9-1.667/build'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/home/alan/acx100-0.2.0pre8_plus_fixes_45/src'
make: *** [driver] Error 2
[root@localhost acx100-0.2.0pre8_plus_fixes_45]#

----------------------------------------------------------------------------------------------

Many thanks, Alan