Find the answer to your Linux question:
Results 1 to 8 of 8
here modem run well in windoz but in rh9 don't (i'm realy newbie plz help) 08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdm.tsp, Version 5.0.2195 - Retail 08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdmat.dll, Version ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2003
    Posts
    4

    Modem troubles (was(plz, help me (plz realy )))


    here modem run well in windoz but in rh9 don't (i'm realy newbie plz help)
    08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdm.tsp, Version 5.0.2195 - Retail
    08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdmat.dll, Version 5.0.2195 - Retail
    08-15-2003 20:58:29.921 - File: C:\WINNT\system32\uniplat.dll, Version 5.0.2195 - Retail
    08-15-2003 20:58:29.937 - File: C:\WINNT\system32\drivers\modem.sys, Version 5.0.2195 - Retail
    08-15-2003 20:58:29.937 - File: C:\WINNT\system32\modemui.dll, Version 5.0.2195 - Retail
    08-15-2003 20:58:29.937 - Modem type: NetoDragon 56K Voice Modem
    08-15-2003 20:58:29.937 - Modem inf path: oem5.inf
    08-15-2003 20:58:29.937 - Modem inf section: Modem1
    08-15-2003 20:58:30.078 - 460800,8,N,1, ctsfl=1, rtsctl=2
    08-15-2003 20:58:30.078 - Initializing modem.
    08-15-2003 20:58:30.093 - Send: AT<cr>
    08-15-2003 20:58:30.093 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.093 - Interpreted response: OK
    08-15-2003 20:58:30.109 - Send: AT &F E0 V1 &A3 &D2 &C1 S0=0<cr>
    08-15-2003 20:58:30.109 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.109 - Interpreted response: OK
    08-15-2003 20:58:30.109 - Send: ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
    08-15-2003 20:58:30.109 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.109 - Interpreted response: OK
    08-15-2003 20:58:30.109 - Waiting for a call.
    08-15-2003 20:58:30.125 - Send: at#cid=1<cr>
    08-15-2003 20:58:30.125 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.125 - Interpreted response: OK
    08-15-2003 20:58:30.140 - Send: ATS0=0<cr>
    08-15-2003 20:58:30.140 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.140 - Interpreted response: OK
    08-15-2003 20:58:30.140 - 230400,8,N,1, ctsfl=1, rtsctl=2
    08-15-2003 20:58:30.140 - Initializing modem.
    08-15-2003 20:58:30.140 - Send: AT<cr>
    08-15-2003 20:58:30.140 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.140 - Interpreted response: OK
    08-15-2003 20:58:30.156 - Send: AT &F E0 V1 &A3 &D2 &C1 S0=0<cr>
    08-15-2003 20:58:30.156 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.156 - Interpreted response: OK
    08-15-2003 20:58:30.171 - Send: ATS7=60S19=0L1M0\N3%C3&H1N1X4<cr>
    08-15-2003 20:58:30.171 - Recv: <cr><lf>OK<cr><lf>
    08-15-2003 20:58:30.171 - Interpreted response: OK
    08-15-2003 20:58:30.171 - Dialing.
    08-15-2003 20:58:30.187 - Send: ATDT####<cr>
    08-15-2003 20:58:47.468 - Recv: <cr><lf>MODULATION: V.92
    08-15-2003 20:58:47.468 - Interpreted response: Informative
    08-15-2003 20:58:47.468 - Recv: <cr><lf>PROTOCOL: LAPM
    08-15-2003 20:58:47.468 - Interpreted response: Informative
    08-15-2003 20:58:47.468 - Recv: <cr><lf>COMPRESSION: V.44
    08-15-2003 20:58:47.468 - Interpreted response: Informative
    08-15-2003 20:58:47.468 - Recv: <cr><lf>CONNECT 52000<cr><lf>
    08-15-2003 20:58:47.468 - Interpreted response: Connect
    08-15-2003 20:58:47.468 - Connection established at 52000bps.
    08-15-2003 20:58:47.468 - Error-control on.
    08-15-2003 20:58:47.468 - Data compression on.
    08-15-2003 20:59:17.468 - Read: Total: 8254, Per/Sec: 272, Written: Total: 6844, Per/Sec: 225
    08-15-2003 21:01:17.468 - Read: Total: 133389, Per/Sec: 1042, Written: Total: 65911, Per/Sec: 492
    thanks thanks

    title edited by jaguar

  2. #2
    flw
    flw is offline
    Linux Engineer
    Join Date
    Mar 2003
    Location
    U.S.A.
    Posts
    1,025
    It appears you have winmodem or linmodem which means it lacks a internal controller. Linux doesn't play well with modems without controllers. You have two options that I know of.


    1. Go to the tut section here and see if you can get it to work.

    2. Replace or add a modem with a internal controller.

    Hope this is of some help.
    Dan

    \"Keep your friends close and your enemies even closer\" from The Art of War by Sun Tzu\"

  3. #3
    Just Joined!
    Join Date
    Jul 2003
    Posts
    4
    i also use gui (rh9), but when dial ,
    i want dial to my isp is 87723 but when i listen in phone (in pc)
    it can insert x87723 (i think it is code country or other)
    now how can remove x number before 87723 (plz)
    many thanks

  4. $spacer_open
    $spacer_close
  5. #4
    Linux Engineer kriss's Avatar
    Join Date
    Jun 2003
    Posts
    1,113
    maybe this will help?
    I don't know, Good luck

  6. #5
    flw
    flw is offline
    Linux Engineer
    Join Date
    Mar 2003
    Location
    U.S.A.
    Posts
    1,025
    In gnome you use Network Conifgurator tool to create your modem setup. That is also where you put in or edit your DUN client settings (like the number to dial) for your modem.

    This assumes your machine even see's the modem at all.
    Dan

    \"Keep your friends close and your enemies even closer\" from The Art of War by Sun Tzu\"

  7. #6
    Just Joined!
    Join Date
    Jul 2003
    Posts
    4
    thanks for reply

    it isn't ok at all.
    can you post file need to config your modem (or dialup), it can help me?

  8. #7
    flw
    flw is offline
    Linux Engineer
    Join Date
    Mar 2003
    Location
    U.S.A.
    Posts
    1,025
    Are you using a gui if so which one or straight cmd line?
    Dan

    \"Keep your friends close and your enemies even closer\" from The Art of War by Sun Tzu\"

  9. #8
    Just Joined!
    Join Date
    Jul 2003
    Posts
    4
    i can't connect to isp (because my isp has number is:87723 but when wvdial then it deal with x87723 that x is auto intsert my number isp?
    could you help me?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •