Results 1 to 3 of 3
I am using the snmp protocol to extract the system information like the hardware configuration , the devics attached to the system, softwares and so on .. i want some ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 12-05-2005 #1
- Join Date
- Nov 2005
I am using the snmp protocol to extract the system information like
the hardware configuration , the devics attached to the system, softwares and so on .. i want some very specific information like the
filesystemtype(like ext2or ext3 or swap.. )
computer manufacturer name
pci devices attached to the system
dhcp configuration details..
I am using the default available MIB and would like to know if someone cud give me the exact OID values from which this info can be obtained.. I would also want to know if there is any other alternative available to obtain this information using SNMP ...
- 12-05-2005 #2
It's not very hande but what I usually do in such case is to list all avaliable MIBs (eg. setting MIB view to .1 in snmpd.conf) and greb for the values I'm searching for on my local machine. There I get to OID.
- 04-08-2008 #3
- Join Date
- Feb 2008
hello i need help on snmp
me to working on that same thing SNMP protocol , i got stuck in broadcasting message that machine should broadcast message to 192.168.1.255/255.255.255.255 but i m not able run this in thread, that i need to hold the responded machine ip-address.
can any one plz help me on this ......
the same work as the above post......