Results 1 to 1 of 1
Hi I have a problem with ppp and I simply stuck...there are no errors, everything looks fine but there is no incomming trafic. I am not an expert in ppp ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 02-22-2006 #1
- Join Date
- Feb 2006
ppp, bluetooth, iPaq and K700i
I have a problem with ppp and I simply stuck...there are no errors, everything looks fine but there is no incomming trafic. I am not an expert in ppp so I have probably missed some basic things. The problem can be some where else but I think it's a ppp issue.
After connecting via rfcomm and dailing up I get a new interface ppp0 and a default route. When I try to ping I can see (using pppstats) that packets go out but nothing comes back.
I use Familiar Linux v0.8.2.
# cat connect-gprs
if [ ! -e /dev/rfcomm0 ]; then ln -s
/dev/bluetooth/rfcomm/0 /dev/rfcomm0; fi
pppd /dev/rfcomm0 28800 debug nocrtscts noipdefault novj novjccomp \
defaultroute connect 'chat -v -f /etc/ppp/peers/gprs' \
&& exit 0 || exit 1
# cat peers/gprs
AFTER SUCCESSFUL DAILUP
ppp0 Link encap:Point-Point Protocol
inet addr:10.152.0.210 P-t-P:184.108.40.206 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:34 (34.0 B) TX bytes:40 (40.0 B)
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
220.127.116.11 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
0.0.0.0 18.104.22.168 0.0.0.0 UG 0 0 0 ppp0