Hi,

I'm trying to connect to the internet using a GPRS card. Everything seems OK, but when both sides are negotiating the connection, it keeps retrying the same step without going any further.

Any help will be greatly appreciated.

Hi,

when I try to connect to vodafone using the audiovox rtm 8000, I get myself stuck at the LCP negotiation; during the negotiation, no Rejection nor Nack responses appear, but negotiation doesn't go beyong the first step:



waiting for connect...

ATD*99***1#
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 62
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
LCP: timeout sending Config-Requests
Connection terminated.