Find the answer to your Linux question:
Results 1 to 2 of 2
Hi, I'm new here so I'd like to ask a couple of things.. I've got openVPN setup and working.. its on the 10.35.3.0 range whereas my LAN ip is on ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Apr 2007
    Posts
    4

    VPN + External traffic


    Hi, I'm new here so I'd like to ask a couple of things..

    I've got openVPN setup and working.. its on the 10.35.3.0 range whereas my LAN ip is on the 192.168.1.0 range. I can ping each other so that's fine.

    My major question is, how would I route all my LAN traffic through OpenVPN without having to resort to bridging? I run my VPN server on a single IP, so for me it isn't an option. I've tried reading up on masquerading but thats a bit too indepth for me at the moment, so I'm wondering if anyone here has a simple solution that would allow me to direct all my traffic through the VPN network out into the Internet. I don't have/want to filter anything out, so we can skip that part.

    A big thanks in advance for any help givem

  2. #2
    Just Joined!
    Join Date
    Apr 2007
    Posts
    4
    This is the result of netstat -nr btw

    Code:
    10.35.3.2       0.0.0.0         255.255.255.255 UH        0 0          0 tun0
    10.35.3.0       10.35.3.2       255.255.255.0   UG        0 0          0 tun0
    88.191.28.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0
    169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
    0.0.0.0         88.191.28.1     0.0.0.0         UG        0 0          0 eth0
    What I'd like to do is to allow traffic from 10.35.3.0 to pass through the gateway of the default connection which belongs to eth0(88.191.28.1). Any ideas from the gurus here?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •