I Have a small(!?) problem here. I have to routers we call them R1 and R2 and the routers is connected as below.

INTERNET
|
217.211.84.61 (extIP from ISP)
R1
192.168.0.1 (intIP for my DMZ also my GW)
| This is my DMZ 192.168.0.0/24
192.168.0.11 (extIp for my Intranet)
R2
192.168.1.1 (intIP for my intranet also my GW for intranet)
| (My client computers on 192.168.1.0/24)
INTRANET

My routers are also firewalls, but the firewall function is turned of on R2 for this test purposes
And I seem to have problems setting up the router to forward traffic from
R1 to R2 and the clients.
The first things i'm trying is to ping one client 192.168.1.100.

And it seems i dont have a clue of how to setup the routing tables.
R1 has the following table.
217.211.84.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.1.0 192.168.0.11 255.255.255.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 217.211.84.1 0.0.0.0 UG 0 0 0 eth1

Im really getting grey hair here.

Thank full for any help

Regards André