Find the answer to your Linux question:
Results 1 to 2 of 2
Hi guys How can I fix Jun 19 03:52:35 StefanLinux pppd[3519]: pppd 2.4.1 started by root, uid 0 Jun 19 03:52:35 StefanLinux pppd[3519]: Using interface ppp0 Jun 19 03:52:35 StefanLinux ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jun 2004
    Location
    South Africa
    Posts
    8

    LCP PAD0 timeouts - trying to use Rh9 to connect over ADSL


    Hi guys

    How can I fix

    Jun 19 03:52:35 StefanLinux pppd[3519]: pppd 2.4.1 started by root, uid 0
    Jun 19 03:52:35 StefanLinux pppd[3519]: Using interface ppp0
    Jun 19 03:52:35 StefanLinux pppd[3519]: Connect: ppp0 <--> /dev/pts/3
    Jun 19 03:52:35 StefanLinux /etc/hotplug/net.agent: assuming ppp0 is already up
    Jun 19 03:53:06 StefanLinux pppd[3519]: LCP: timeout sending Config-Requests
    Jun 19 03:53:06 StefanLinux pppd[3519]: Connection terminated.
    Jun 19 03:53:07 StefanLinux /etc/hotplug/net.agent: NET unregister event not
    supported
    Jun 19 03:53:10 StefanLinux pppoe[3520]: Timeout waiting for PADO packets
    Jun 19 03:53:10 StefanLinux pppd[3519]: Exit.

    My ADSL router / modem works just fine in Windows, but it is as dead a dodo in Linux. I can ping it just fine, but how do I get it to connect to my ISP like it does in Windows? I have tried using adsl-setup, but string to "up" the connection with ifup ppp0 just gives the above in var/log/messages.

    I have the following config files:

    sysctl.conf:

    net.ipv4.ip_forward = 1

    # Controls source route verification
    net.ipv4.conf.default.rp_filter = 1

    # Controls the System Request debugging functionality of the kernel
    kernel.sysrq = 0

    # Controls whether core dumps will append the PID to the core filename.
    # Useful for debugging multi-threaded applications.
    kernel.core_uses_pid = 1
    ~

    /etc/network:

    NETWORKING=yes
    HOSTNAME=StefanLinux
    GATEWAYDEV=eth0
    FORWARD_IPV4=yes

    Commandlines for pppd and pppoe from adsl-setup:

    root 3672 3662 0 03:59 ? 00:00:00 /usr/sbin/pppd pty /usr/sbin/pppoe -p /var/run/pppoe-adsl.pid.pppoe -I eth0 -T 20 -U -m 1412 ipparam ppp0 linkname ppp0 noipdefault noauth default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp

    /etc/sysconfig/devices/ifcfg-ppp0:

    USERCTL=yes
    BOOTPROTO=dialup
    NAME=DSLppp0
    DEVICE=ppp0
    TYPE=xDSL
    ONBOOT=no
    PIDFILE=/var/run/pppoe-adsl.pid
    FIREWALL=NONE
    PING=.
    PPPOE_TIMEOUT=20
    LCP_FAILURE=3
    LCP_ECHO_INTERVAL=600
    LCP_ECHO_FAILURE=10
    LCP_INTERVAL=80
    CLAMPMSS=1412
    CONNECT_POLL=6
    CONNECT_TIMEOUT=60
    DEFROUTE=yes
    SYNCHRONOUS=no
    ETH=eth0
    PROVIDER=DSLppp0
    USER='guest1@telkomadsl'
    PEERDNS=no
    PERSIST=no

    I have configured the connection correctly using adsl-setup but I keep getting LCP PAD0 errors.

    Any ideas? What must I change? How can I get ADSL access in Linux?

    Thanks!

  2. #2
    Just Joined!
    Join Date
    Jun 2004
    Location
    South Africa
    Posts
    8

    SOLVED

    Hi guys,

    Just thought I report I got this solved. I discovered I don't need to use PPPoE - all I needed was a properly configured gateway. All is fine now, I can surf under Linux just dandy!

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •