Results 1 to 2 of 2
Hi, I am using iperf packet generator tool in my project. I run iperf on FC6 system. In UDP transmission mode of iperf i sometimes get following warning message WARNING: ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 07-30-2007 #1
- Join Date
- Jul 2007
Iperf warning message meaning.
I am using iperf packet generator tool in my project. I run iperf on FC6 system.
In UDP transmission mode of iperf i sometimes get following warning message
WARNING: did not receive ack of last datagram after 10 tries.
Could anybody plz tell me what does that mean?
Thanks in advance
- 10-19-2008 #2
- Join Date
- Oct 2008
Same problem here. Something prevented the server end of the link from sending a reply (provide the resulting stats to the client end) even though the server end acknowledged a connection in the beginning.
I was running in UDP mode.
The server end is running a Linux-based firewall (iptables); I even opened up the correct incoming UDP port. While it let the connection through to the server once I opened the firewall, server seems not to be replying.
I did the reverse where the firewall on the server end was a Netgear FVS-something, and it works fine. But I am also running different versions of iperf so this could be a problem.