Cisco VPN client connects – no command prompt
When I connect to the remote site with Cisco VPN client and my configuration profile, I get the following output:
It seems that the VPN client had connected (?). I would expect that the VPN client would exit (but keep running on the background), and I would get the command prompt back. Unfortunately, I don’t get a command prompt. Why am I not getting any command prompt after connecting to the remote network through Cisco VPN client?
Negotiating security policies.
Securing communication channel.
Your VPN connection is secure.
VPN tunnel information.
Client address: XXX.XXX.XXX.XXX
Server address: XXX.XXX.XXX.XXX
Encryption: 168-bit 3-des
IP compression: none
NAT passthrough is active on port UDP XXX
Local LAN access is disabled [it’s deliberately disabled]
My ultimate goal is to write a bash script, which would connect via VPN and download some files from a remote network via FTP. Could anybody post some links to an example of a VPN session:?:
UPDATE: Well, I should have RTFMed better. There's a FAQ on a Cisco web site that directly amswers my question http://www.cisco.com/en/US/products/...2dbe.shtml#q22 Now I just need to find out how can this be scipted :?: