Help requests related to Linux networking: setup, configuration, internet connection sharing, iptables, etc
I have a domain and two providers (2 different ip's)
What i want to do is to set my server in such way that when a connection fails my www...
This one really has me confused, so hopefully someone has a good idea.
I have 2 servers, one running Fedora Core 4 called Ricky and another...
i'm student that finished my final project,
buliding VoIP over VPN MPLS (multiprotocol label switching).
i have some problem, the...
I have a strange issue:
net-snmp 5.3.1 on a RH Linux 2.6.18-8.el5PAE i686 i686 i386 GNU/Linux
net-snmp 5.4.1 on a...
I want to be able to use a KVM switch to go back and forth between 2 pc's, one with WINXP and the oteher with Linux,(have not decided on which...
I would like to create a gateway in order to do a special kind of NAT.
I need to do SNAT and DNAT in this way :
@src A.X.Y.Z ->...
This is more of a personal problem. I work for a University and the Univ has given me an ip address range 220.127.116.11 -...
I need help for analysing bandwidth usage which is required for pure-ftpd. I have have looked at the following:
Pure-ftpd log with AWStats:...
I want to check the qos of the network connection.
1)How much time it takes to ping the server.
2) How much time it takes to access the...
Do you know how to make linux reply arp request for other machines?
I have a 3com boomerang combo nic with AUI/TP/BNC ports that I can only run in half-duplex (kernel-2.6.22-17.tex2). I would appreciate if...
This linux box is not a router, and with its two nics it serves as a OpenVPN server (on eth0) and an SSL server (on eth1).
How can i disable using DNS requests
in call of gethostbyname?
I've been lurking around for almost 5 years, hoping to find a solution to modem driver that will finally allow me to completely switch to Linux. By...
I'm on a network with one gateway and one windows pc on the lan. I wanted to test OpenVPN so I VPNed to the gateway, using default server.conf. ...
my OS CentOS 5.2
# ethtool -i eth0
# ethtool -i eth1
This is about Cisco stuff but I hope it's not banned in here. ^^
I have 2 Cisco Switches Layer 3
- First one is Catalyst 3560 and running...
my main pc runs win xp pro on workgroup jsghome with a secondary sata 250gb hard disk shared over a wired network via a buffalo router
my laptop can...
I am new to Linux and have been trying to set up an ftp connection using pure-ftpd. I have been able to set up the ftp and am using...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.