Seeing huge packet loss after Channel - bonding (NIC-Teaming)
We are trying to implement NIC-teaming / Channel-bonding on RHEL5 m/c.
I googled and found the configuration step which we implemented, I can see the bind interface configured and up but Iím facing huge packet loss (ranging 50-70%).
Please suggest which is the required mode to avoid this.
Little description on our scenario:
>> We have teamed 3 eth-adapters into one using mgmt IP.
>> Bond Int is up and running and as expected rest 3 disabled.
>> mode used is = 6 ( redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5.4/html/Deployment_Guide/s2-modules-bondingused this link to set suitable mode.
Please let us know if some config file output or something is required.
After successfully configuring thr bond-interface, still I'm not able to SSH/Telnet as there is huge packet loss, can somebody explain what combination to use, we are using it over cisco n7000 switches.