Find the answer to your Linux question:
Results 1 to 3 of 3
i have 3 partitions: 2 linux and 1 windows. i have been using the 3 OS regularly with no problems. But today suddenly, I had no internet connection with the ...
  1. #1
    Just Joined!
    Join Date
    May 2010
    Posts
    1

    suddenly, no internet connection

    i have 3 partitions: 2 linux and 1 windows.

    i have been using the 3 OS regularly with no problems. But today suddenly, I had no internet connection with the 2 linux partitions which are complete independent, but no problems with windows. i can keep using the internet under windows with no problems.

    i haven't touched any conf files.

    I have a usb wifi internet connection. any suggestions about where the problem might be ??

    edit: I just noticed a change in my dmesg file when i start any of my 2 linux partitions. At the end of the lines I have the following :


    ndiswrapper version 1.47 loaded (smp=yes)
    usb 4-2: reset high speed USB device using ehci_hcd and address 2
    ndiswrapper: driver rt2500usb (Linksys,04/13/2005, 2.00.02.0000) loaded
    wlan0: ethernet device 00:12:17:81:7f:8b using NDIS driver: rt2500usb, version: 0x20000, NDIS version: 0x500, vendor: 'Ralink Technology Inc.', 13B1:000D.F.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
    usbcore: registered new driver ndiswrapper
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    eth0: Media Link Off
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    wlan0: no IPv6 routers present
    BUG: unable to handle kernel paging request at virtual address 04f27250
    printing eip:
    e0c81c19
    *pde = 00000000
    Oops: 0000 [#1]
    SMP
    Modules linked in: button ac battery ipv6 ndiswrapper dm_snapshot dm_mirror dm_mod loop snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul tsdev snd_emu10k1 snd_seq_dummy snd_seq_oss snd_seq_midi snd_intel8x0 snd_seq_midi_event snd_pcm_oss snd_mixer_oss snd_seq snd_rawmidi snd_ac97_codec snd_ac97_bus snd_seq_device snd_pcm snd_util_mem parport_pc parport snd_hwdep snd_timer rtc snd serio_raw psmouse emu10k1_gp gameport pcspkr shpchp pci_hotplug soundcore snd_page_alloc i2c_sis96x i2c_core sis_agp agpgart evdev ext3 jbd mbcache ide_cd cdrom ide_disk generic sata_promise libata scsi_mod ehci_hcd e100 ohci_hcd sis900 mii usbcore ohci1394 sis5513 ide_core ieee1394 thermal processor fan
    CPU: 0
    EIP: 0060:[<e0c81c19>] Tainted: P VLI
    EFLAGS: 00010206 (2.6.18-6-686 #1)
    EIP is at 0xe0c81c19
    eax: 00000001 ebx: e0caf000 ecx: 00000000 edx: 04f27250
    esi: e0c2f255 edi: df0b36f8 ebp: df54be44 esp: df54be40
    ds: 007b es: 007b ss: 0068
    Process ntdriver (pid: 2267, ti=df54a000 task=df0b3550 task.ti=df54a000)
    Stack: 0054bf38 df54bf74 e0c8aac9 04f27250 df54bf38 00000001 00000000 00000000
    ffffffff 00000000 00040000 ff01014e 160b8482 6c483024 6018120c df54be94
    df0b00c8 08e9a740 d70e3fc0 dfbd8837 ff00f99a 3004012f 00000118 0202ac0f
    Call Trace:
    [<e0c21820>] ntdriver_thread+0x7e/0xa5 [ndiswrapper]
    [<e0c217a2>] ntdriver_thread+0x0/0xa5 [ndiswrapper]
    [<c012d807>] kthread+0xc2/0xef
    [<c012d745>] kthread+0x0/0xef
    [<c0101005>] kernel_thread_helper+0x5/0xb
    Code: d4 8b e5 5d c2 04 00 cc cc cc cc cc cc cc cc cc cc cc 55 8b ec 51 c6 45 ff 00 eb 08 8a 45 ff 04 01 88 45 ff 0f b6 4d ff 8b 55 08 <0f> b6 02 3b c8 7d 29 6a 06 8b 4d 0c 51 0f b6 55 ff 69 d2 38 09
    EIP: [<e0c81c19>] 0xe0c81c19 SS:ESP 0068:df54be40
    <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
    NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 16x mode
    agpgart: SiS delay workaround: giving bridge time to recover.
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 16x mode

  2. #2
    Linux Newbie raghaven.kumar's Avatar
    Join Date
    Mar 2008
    Location
    Bangalore, India
    Posts
    209
    how do u connect to internet?
    did you try /etc/init.d/network restart?

  3. #3
    Super Moderator devils casper's Avatar
    Join Date
    Jun 2006
    Location
    Chandigarh, India
    Posts
    24,316
    Hi and Welcome !

    Which distros/versions of Linux are you using? Did you update/upgrade both Linux OSes recently?
    It is amazing what you can accomplish if you do not care who gets the credit.
    New Users: Read This First

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
...