Printable View
I'm pretty new to OpenSuse so this is probably an extremely basic question.
I no longer have access to wired internet, so I must use wireless. I have a USB WLAN adapter (Linksys). When I type in the command "lsusb", it recognizes the Linksys adapter, and when I look at the hardware information, it lists the WLAN adapater. My question is now: how do I connect to a network? I've searched around for a while and can only find troubleshooting information, not basic instructions.
Thanks,
Peter
Take a look at this post.
Report back with the requested info, and we will be able to help you with this.
Here is the information:
lsusb results
dmseg results (WLAN messages bold)Code:Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 006: ID 1737:0077 Linksys
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 047b:0011 Silitek Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 004: ID 05dc:0080
Code:[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34-12-default (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP 2010-06-29 02:39:08 +0200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 37717000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009f6000 - 012ce579
[ 0.000000] Move RAMDISK from 0000000037717000 - 0000000037fef578 to 009f6000 - 012ce578
[ 0.000000] ACPI: RSDP 000fbaa0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT cfe90100 0005C (v01 041210 XSDT2101 20100412 MSFT 00000097)
[ 0.000000] ACPI: FACP cfe90290 000F4 (v03 041210 FACP2101 20100412 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfe90450 0F392 (v01 A1608 A1608000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS cfea8000 00040
[ 0.000000] ACPI: APIC cfe90390 0007C (v01 041210 APIC2101 20100412 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfe90410 0003C (v01 041210 OEMMCFG 20100412 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfea8040 00072 (v01 041210 OEMB2101 20100412 MSFT 00000097)
[ 0.000000] ACPI: SRAT cfe9f8a0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET cfe9f9b0 00038 (v01 041210 OEMHPET 20100412 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfe9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cfe90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] On node 0 totalpages: 851487
[ 0.000000] free_area_init_node: node 0, pgdat c0882580, node_mem_map c12d0200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4878 pages used for memmap
[ 0.000000] HighMem zone: 619396 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34260 r0 d23084 u524288
[ 0.000000] pcpu-alloc: s34260 r0 d23084 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844833
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD5000AAKS-00A7B2_WD-WCASYD900194-part7 resume=/dev/disk/by-id/ata-WDC_WD5000AAKS-00A7B2_WD-WCASYD900194-part5 splash=silent quiet vga=0x345
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (51 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00009f1b04] TEXT DATA BSS
[ 0.000000] #3 [00009f2000 - 00009f5271] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009f000 - 00000f06e0] BIOS reserved
[ 0.000000] #7 [00000f08d4 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f06e0 - 00000f08d4] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009f6000 - 00012cf000] NEW RAMDISK
[ 0.000000] #13 [00012cf000 - 00012d0000] BOOTMEM
[ 0.000000] #14 [00012d0000 - 0002cd0000] BOOTMEM
[ 0.000000] #15 [0002cd0000 - 0002cd0004] BOOTMEM
[ 0.000000] #16 [0002cd0040 - 0002cd0100] BOOTMEM
[ 0.000000] #17 [0002cd0100 - 0002cd0154] BOOTMEM
[ 0.000000] #18 [0002cd0180 - 0002cd3180] BOOTMEM
[ 0.000000] #19 [0002cd3180 - 0002cd3268] BOOTMEM
[ 0.000000] #20 [0002cd3280 - 0002cdf280] BOOTMEM
[ 0.000000] #21 [0002cdf280 - 0002cdf2a5] BOOTMEM
[ 0.000000] #22 [0002cdf2c0 - 0002cdf2e7] BOOTMEM
[ 0.000000] #23 [0002cdf300 - 0002cdf418] BOOTMEM
[ 0.000000] #24 [0002cdf440 - 0002cdf480] BOOTMEM
[ 0.000000] #25 [0002cdf480 - 0002cdf4c0] BOOTMEM
[ 0.000000] #26 [0002cdf4c0 - 0002cdf500] BOOTMEM
[ 0.000000] #27 [0002cdf500 - 0002cdf540] BOOTMEM
[ 0.000000] #28 [0002cdf540 - 0002cdf580] BOOTMEM
[ 0.000000] #29 [0002cdf580 - 0002cdf5c0] BOOTMEM
[ 0.000000] #30 [0002cdf5c0 - 0002cdf600] BOOTMEM
[ 0.000000] #31 [0002cdf600 - 0002cdf640] BOOTMEM
[ 0.000000] #32 [0002cdf640 - 0002cdf680] BOOTMEM
[ 0.000000] #33 [0002cdf680 - 0002cdf690] BOOTMEM
[ 0.000000] #34 [0002cdf6c0 - 0002cdf76a] BOOTMEM
[ 0.000000] #35 [0002cdf780 - 0002cdf82a] BOOTMEM
[ 0.000000] #36 [0003000000 - 000300e000] BOOTMEM
[ 0.000000] #37 [0003080000 - 000308e000] BOOTMEM
[ 0.000000] #38 [0003100000 - 000310e000] BOOTMEM
[ 0.000000] #39 [0003180000 - 000318e000] BOOTMEM
[ 0.000000] #40 [0003200000 - 000320e000] BOOTMEM
[ 0.000000] #41 [0003280000 - 000328e000] BOOTMEM
[ 0.000000] #42 [0002ce1840 - 0002ce1844] BOOTMEM
[ 0.000000] #43 [0002ce1880 - 0002ce1884] BOOTMEM
[ 0.000000] #44 [0002ce18c0 - 0002ce18d8] BOOTMEM
[ 0.000000] #45 [0002ce1900 - 0002ce1918] BOOTMEM
[ 0.000000] #46 [0002ce1940 - 0002ce19d8] BOOTMEM
[ 0.000000] #47 [0002ce1a00 - 0002ce1a38] BOOTMEM
[ 0.000000] #48 [0002ce1a40 - 0002ce5a40] BOOTMEM
[ 0.000000] #49 [0002ce5a40 - 0002d65a40] BOOTMEM
[ 0.000000] #50 [0002d65a40 - 0002da5a40] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe90)
[ 0.000000] Memory: 3360896k/3406400k available (3848k kernel code, 45052k reserved, 2861k data, 408k init, 2497096k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc088e000 - 0xc08f4000 ( 408 kB)
[ 0.000000] .data : 0xc05c20f0 - 0xc088d8a8 (2861 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05c20f0 (3848 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:456
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2809.519 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5619.03 BogoMIPS (lpj=11238076)
[ 0.004033] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.004065] Security Framework initialized
[ 0.004076] AppArmor: AppArmor initialized
[ 0.004085] Mount-cache hash table entries: 512
[ 0.004147] Initializing cgroup subsys ns
[ 0.004150] Initializing cgroup subsys cpuacct
[ 0.004153] Initializing cgroup subsys memory
[ 0.004157] Initializing cgroup subsys devices
[ 0.004159] Initializing cgroup subsys freezer
[ 0.004160] Initializing cgroup subsys net_cls
[ 0.004162] Initializing cgroup subsys blkio
[ 0.004177] CPU: Physical Processor ID: 0
[ 0.004178] CPU: Processor Core ID: 0
[ 0.004181] mce: CPU supports 6 MCE banks
[ 0.004187] using C1E aware idle routine
[ 0.004191] Performance Events: AMD PMU driver.
[ 0.004193] ... version: 0
[ 0.004194] ... bit width: 48
[ 0.004195] ... generic registers: 4
[ 0.004196] ... value mask: 0000ffffffffffff
[ 0.004197] ... max period: 00007fffffffffff
[ 0.004198] ... fixed-purpose events: 0
[ 0.004199] ... event mask: 000000000000000f
[ 0.004203] Checking 'hlt' instruction... OK.
[ 0.020264] Unpacking initramfs...
[ 0.152538] Freeing initrd memory: 9060k freed
[ 0.154599] ACPI: Core revision 20100121
[ 0.176048] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.176361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.219422] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
[ 0.220000] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.308015] System has AMD C1E enabled
[ 0.308023] Switch to broadcast mode on CPU0
[ 0.308028] Switch to broadcast mode on CPU1
[ 0.308032] #2
[ 0.008000] Initializing CPU#2
[ 0.416027] Switch to broadcast mode on CPU2
[ 0.416032] #3
[ 0.008000] Initializing CPU#3
[ 0.524030] Switch to broadcast mode on CPU3
[ 0.524039] #4
[ 0.008000] Initializing CPU#4
[ 0.632029] Switch to broadcast mode on CPU4
[ 0.632045] #5 Ok.
[ 0.008000] Initializing CPU#5
[ 0.740031] Brought up 6 CPUs
[ 0.740031] Total of 6 processors activated (33713.06 BogoMIPS).
[ 0.742921] Switch to broadcast mode on CPU5
[ 0.742921] devtmpfs: initialized
[ 0.742921] regulator: core version 0.5
[ 0.742921] regulator: dummy:
[ 0.742921] Time: 9:27:38 Date: 09/11/10
[ 0.742921] NET: Registered protocol family 16
[ 0.742921] node 0 link 0: io port [1000, ffffff]
[ 0.742921] TOM: 00000000d0000000 aka 3328M
[ 0.742921] Fam 10h mmconf [e0000000, efffffff]
[ 0.742921] node 0 link 0: mmio [a0000, bffff]
[ 0.742921] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.742921] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.742921] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.742921] TOM2: 00000001b0000000 aka 6912M
[ 0.742921] bus: [00, 07] on node 0 link 0
[ 0.742921] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.742921] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.742921] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.742921] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.742921] ACPI: bus type pci registered
[ 0.742921] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.742921] PCI: not using MMCONFIG
[ 0.742921] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.742921] PCI: Using configuration type 1 for base access
[ 0.742921] PCI: Using configuration type 1 for extended access
[ 0.744080] bio: create slab <bio-0> at 0
[ 0.745342] ACPI: EC: Look up EC in DSDT
[ 0.746780] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.966895] ACPI: Interpreter enabled
[ 0.966903] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.966923] ACPI: Using IOAPIC for interrupt routing
[ 0.966989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.969552] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.969554] PCI: Using MMCONFIG for extended config space
[ 0.976599] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.976772] ACPI: No dock devices found.
[ 0.976774] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.976904] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.977154] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.977156] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.977158] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.977159] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.977161] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.977163] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.977259] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.977261] pci 0000:00:02.0: PME# disabled
[ 0.977293] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.977295] pci 0000:00:09.0: PME# disabled
[ 0.977321] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.977322] pci 0000:00:0a.0: PME# disabled
[ 0.977394] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.977399] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.977405] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.977410] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.977415] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.977420] pci 0000:00:11.0: reg 24: [mem 0xfe4ffc00-0xfe4fffff]
[ 0.977434] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.977478] pci 0000:00:12.0: reg 10: [mem 0xfe4fe000-0xfe4fefff]
[ 0.977532] pci 0000:00:12.2: reg 10: [mem 0xfe4ff800-0xfe4ff8ff]
[ 0.977573] pci 0000:00:12.2: supports D1 D2
[ 0.977575] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.977578] pci 0000:00:12.2: PME# disabled
[ 0.977601] pci 0000:00:13.0: reg 10: [mem 0xfe4fd000-0xfe4fdfff]
[ 0.977654] pci 0000:00:13.2: reg 10: [mem 0xfe4ff400-0xfe4ff4ff]
[ 0.977696] pci 0000:00:13.2: supports D1 D2
[ 0.977697] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.977701] pci 0000:00:13.2: PME# disabled
[ 0.977770] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.977775] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.977780] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.977785] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.977790] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.977839] pci 0000:00:14.2: reg 10: [mem 0xfe4f8000-0xfe4fbfff 64bit]
[ 0.977873] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.977876] pci 0000:00:14.2: PME# disabled
[ 0.977957] pci 0000:00:14.5: reg 10: [mem 0xfe4fc000-0xfe4fcfff]
[ 0.978038] pci 0000:00:15.0: supports D1 D2
[ 0.978068] pci 0000:00:16.0: reg 10: [mem 0xfe4f7000-0xfe4f7fff]
[ 0.978121] pci 0000:00:16.2: reg 10: [mem 0xfe4ff000-0xfe4ff0ff]
[ 0.978163] pci 0000:00:16.2: supports D1 D2
[ 0.978164] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.978167] pci 0000:00:16.2: PME# disabled
[ 0.978298] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.978305] pci 0000:01:00.0: reg 18: [mem 0xfe5e0000-0xfe5fffff 64bit]
[ 0.978309] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 0.978315] pci 0000:01:00.0: reg 30: [mem 0xfe5c0000-0xfe5dffff pref]
[ 0.978329] pci 0000:01:00.0: supports D1 D2
[ 0.978353] pci 0000:01:00.1: reg 10: [mem 0xfe5bc000-0xfe5bffff 64bit]
[ 0.978379] pci 0000:01:00.1: supports D1 D2
[ 0.988039] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.988044] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.988046] pci 0000:00:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.988050] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.988094] pci 0000:02:00.0: reg 10: [mem 0xfe6fe000-0xfe6fffff 64bit]
[ 0.988136] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.988139] pci 0000:02:00.0: PME# disabled
[ 1.000041] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.000045] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.000048] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.000051] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.000127] pci 0000:03:00.0: reg 24: [mem 0xfe7fe000-0xfe7fffff]
[ 1.000156] pci 0000:03:00.0: PME# supported from D3hot
[ 1.000160] pci 0000:03:00.0: PME# disabled
[ 1.000193] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.000200] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
[ 1.000206] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
[ 1.000212] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.000218] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.000261] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.000270] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.000273] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.000275] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.000278] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.000324] pci 0000:04:07.0: reg 10: [mem 0xfe8ff800-0xfe8fffff]
[ 1.000331] pci 0000:04:07.0: reg 14: [io 0xdc00-0xdc7f]
[ 1.000382] pci 0000:04:07.0: supports D2
[ 1.000383] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
[ 1.000387] pci 0000:04:07.0: PME# disabled
[ 1.000427] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.000430] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.000434] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.000437] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.000439] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.000441] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.000443] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.000445] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.000447] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 1.000449] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 1.000522] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 1.000541] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 1.000554] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 1.000561] pci 0000:05:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 1.000598] pci 0000:05:00.0: supports D1 D2
[ 1.000600] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.000604] pci 0000:05:00.0: PME# disabled
[ 1.012045] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.012051] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 1.012054] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.012059] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.012074] pci_bus 0000:00: on NUMA node 0
[ 1.012081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.012281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.012350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 1.012402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.012487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 1.012565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 1.017814] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15)
[ 1.017987] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 1.018159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 1.018319] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15)
[ 1.018474] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 1.018565] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 1.018656] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15)
[ 1.018746] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 1.018829] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.018832] vgaarb: loaded
[ 1.020017] PCI: Using ACPI for IRQ routing
[ 1.020019] PCI: pci_cache_line_size set to 64 bytes
[ 1.020088] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.020091] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 1.020135] NetLabel: Initializing
[ 1.020136] NetLabel: domain hash size = 128
[ 1.020137] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.020148] NetLabel: unlabeled traffic allowed by default
[ 1.020179] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.020182] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.021187] Switching to clocksource tsc
[ 1.024829] AppArmor: AppArmor Filesystem Enabled
[ 1.024836] pnp: PnP ACPI init
[ 1.024842] ACPI: bus type pnp registered
[ 1.027959] pnp: PnP ACPI: found 13 devices
[ 1.027960] ACPI: ACPI bus type pnp unregistered
[ 1.027962] PnPBIOS: Disabled by ACPI PNP
[ 1.027970] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.027972] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.027975] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.027977] system 00:09: [io 0x040b] has been reserved
[ 1.027979] system 00:09: [io 0x04d6] has been reserved
[ 1.027980] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 1.027982] system 00:09: [io 0x0c14] has been reserved
[ 1.027983] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 1.027985] system 00:09: [io 0x0c52] has been reserved
[ 1.027986] system 00:09: [io 0x0c6c] has been reserved
[ 1.027988] system 00:09: [io 0x0c6f] has been reserved
[ 1.027989] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 1.027992] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 1.027994] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 1.027995] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 1.027997] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 1.027998] system 00:09: [io 0x0800-0x089f] has been reserved
[ 1.028000] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 1.028002] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 1.028003] system 00:09: [io 0x0900-0x090f] has been reserved
[ 1.028005] system 00:09: [io 0x0910-0x091f] has been reserved
[ 1.028006] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 1.028009] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
[ 1.028010] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.028012] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.028014] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.028022] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 1.028024] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 1.028025] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 1.028027] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 1.028030] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.028033] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.028034] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.028036] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.028038] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
[ 1.028040] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.062997] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.063000] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 1.063003] pci 0000:00:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.063006] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.063010] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.063012] pci 0000:00:09.0: bridge window [io disabled]
[ 1.063014] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.063017] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.063021] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.063023] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.063026] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.063029] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 1.063032] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.063035] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.063040] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.063044] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.063050] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.063052] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 1.063056] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.063061] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.063070] alloc irq_desc for 18 on node -1
[ 1.063071] alloc kstat_irqs on node -1
[ 1.063075] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.063079] pci 0000:00:02.0: setting latency timer to 64
[ 1.063083] alloc irq_desc for 17 on node -1
[ 1.063084] alloc kstat_irqs on node -1
[ 1.063086] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.063090] pci 0000:00:09.0: setting latency timer to 64
[ 1.063093] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.063097] pci 0000:00:0a.0: setting latency timer to 64
[ 1.063105] alloc irq_desc for 16 on node -1
[ 1.063106] alloc kstat_irqs on node -1
[ 1.063109] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.063113] pci 0000:00:15.0: setting latency timer to 64
[ 1.063116] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.063117] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.063119] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.063121] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.063122] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.063124] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.063126] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.063128] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 1.063129] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.063131] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 1.063133] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.063135] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 1.063136] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.063138] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 1.063139] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.063141] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.063143] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.063144] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.063146] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.063147] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.063149] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.063151] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 1.063152] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.063243] NET: Registered protocol family 2
[ 1.063293] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.063470] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.063850] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.064025] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.064026] TCP reno registered
[ 1.064028] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.064035] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.064143] NET: Registered protocol family 1
[ 1.928114] pci 0000:01:00.0: Boot video device
[ 1.928138] PCI: CLS 64 bytes, default 64
[ 1.928590] Scanning for low memory corruption every 60 seconds
[ 1.928679] audit: initializing netlink socket (disabled)
[ 1.928685] type=2000 audit(1284197258.928:1): initialized
[ 1.937105] highmem bounce pool size: 64 pages
[ 1.937109] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.937331] VFS: Disk quotas dquot_6.5.2
[ 1.937355] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.937467] msgmni has been set to 426
[ 1.937637] alg: No test for stdrng (krng)
[ 1.937661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.937664] io scheduler noop registered
[ 1.937665] io scheduler deadline registered
[ 1.937692] io scheduler cfq registered (default)
[ 1.937800] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.937816] alloc irq_desc for 24 on node -1
[ 1.937817] alloc kstat_irqs on node -1
[ 1.937822] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 1.937857] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.937872] alloc irq_desc for 25 on node -1
[ 1.937873] alloc kstat_irqs on node -1
[ 1.937876] pcieport 0000:00:09.0: irq 25 for MSI/MSI-X
[ 1.937910] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.937925] alloc irq_desc for 26 on node -1
[ 1.937926] alloc kstat_irqs on node -1
[ 1.937929] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
[ 1.938000] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.938038] alloc irq_desc for 27 on node -1
[ 1.938039] alloc kstat_irqs on node -1
[ 1.938045] pcieport 0000:00:15.0: irq 27 for MSI/MSI-X
[ 1.938096] pcieport 0000:00:02.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.938100] pcieport 0000:00:02.0: Failed to receive control of PCIe PME service: no _OSC support
[ 1.938104] pcie_pme: probe of 0000:00:02.0:pcie01 failed with error -13
[ 1.938106] pcieport 0000:00:09.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.938108] pcieport 0000:00:09.0: Failed to receive control of PCIe PME service: no _OSC support
[ 1.938110] pcie_pme: probe of 0000:00:09.0:pcie01 failed with error -13
[ 1.938113] pcieport 0000:00:0a.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.938115] pcieport 0000:00:0a.0: Failed to receive control of PCIe PME service: no _OSC support
[ 1.938117] pcie_pme: probe of 0000:00:0a.0:pcie01 failed with error -13
[ 1.938119] pcieport 0000:00:15.0: Requesting control of PCIe PME from ACPI BIOS
[ 1.938121] pcieport 0000:00:15.0: Failed to receive control of PCIe PME service: no _OSC support
[ 1.938123] pcie_pme: probe of 0000:00:15.0:pcie01 failed with error -13
[ 1.938139] pci-stub: invalid id string ""
[ 1.938536] vesafb: framebuffer at 0xd0000000, mapped to 0xf8100000, using 5775k, total 16384k
[ 1.938537] vesafb: mode is 1400x1050x16, linelength=2816, pages=4
[ 1.938539] vesafb: protected mode interface info at c000:a212
[ 1.938540] vesafb: pmi: set display start = c00ca2a2, set palette = c00ca2e4
[ 1.938541] vesafb: scrolling: redraw
[ 1.938543] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.938677] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 1.938678] bootsplash: silentjpeg size 199461 bytes
[ 1.956449] bootsplash: ...found (1400x1050, 100682 bytes, v3).
[ 2.003290] Console: switching to colour frame buffer device 171x61
[ 2.050455] fb0: VESA VGA frame buffer device
[ 2.050481] isapnp: Scanning for PnP cards...
[ 2.391066] isapnp: No Plug & Play device found
[ 2.391769] Non-volatile memory driver v1.3
[ 2.391770] Linux agpgart interface v0.103
[ 2.391952] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 2.392048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.392324] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.392432] Fixed MDIO Bus: probed
[ 2.392456] PNP: No PS/2 controller found. Probing ports directly.
[ 2.392929] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.392933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.392976] mice: PS/2 mouse device common for all mice
[ 2.393070] cpuidle: using governor ladder
[ 2.393072] cpuidle: using governor menu
[ 2.489515] TCP cubic registered
[ 2.489575] NET: Registered protocol family 10
[ 2.489829] lo: Disabled Privacy Extensions
[ 2.489994] Using IPI No-Shortcut mode
[ 2.490036] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD5000AAKS-00A7B2_WD-WCASYD900194-part5
[ 2.539774] PM: Resume from disk failed.
[ 2.539784] registered taskstats version 1
[ 2.540096] Magic number: 10:722:474
[ 2.540219] Freeing unused kernel memory: 408k freed
[ 2.540356] Write protecting the kernel text: 3852k
[ 2.540403] Write protecting the kernel read-only data: 2600k
[ 2.569527] udev: starting version 157
[ 2.589369] SCSI subsystem initialized
[ 2.610407] usbcore: registered new interface driver usbfs
[ 2.610424] usbcore: registered new interface driver hub
[ 2.610478] usbcore: registered new device driver usb
[ 2.612284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.612308] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.612322] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.612334] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.612368] ehci_hcd 0000:00:12.2: debug port 1
[ 2.612388] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe4ff800
[ 2.623488] libata version 3.00 loaded.
[ 2.624042] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.624059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.624061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.624063] usb usb1: Product: EHCI Host Controller
[ 2.624064] usb usb1: Manufacturer: Linux 2.6.34-12-default ehci_hcd
[ 2.624066] usb usb1: SerialNumber: 0000:00:12.2
[ 2.624146] hub 1-0:1.0: USB hub found
[ 2.624149] hub 1-0:1.0: 5 ports detected
[ 2.624218] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.624230] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.624235] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.624257] ehci_hcd 0000:00:13.2: debug port 1
[ 2.624269] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe4ff400
[ 2.627497] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.627503] alloc irq_desc for 19 on node -1
[ 2.627505] alloc kstat_irqs on node -1
[ 2.627515] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.627537] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.627629] scsi0 : pata_jmicron
[ 2.627711] scsi1 : pata_jmicron
[ 2.628267] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 2.628270] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.636096] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.636112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.636114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.636116] usb usb2: Product: EHCI Host Controller
[ 2.636117] usb usb2: Manufacturer: Linux 2.6.34-12-default ehci_hcd
[ 2.636119] usb usb2: SerialNumber: 0000:00:13.2
[ 2.636189] hub 2-0:1.0: USB hub found
[ 2.636192] hub 2-0:1.0: 5 ports detected
[ 2.636265] ahci 0000:00:11.0: version 3.0
[ 2.636273] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.636303] alloc irq_desc for 28 on node -1
[ 2.636304] alloc kstat_irqs on node -1
[ 2.636313] ahci 0000:00:11.0: irq 28 for MSI/MSI-X
[ 2.636398] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.636400] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.636617] scsi2 : ahci
[ 2.636672] scsi3 : ahci
[ 2.636729] scsi4 : ahci
[ 2.636769] scsi5 : ahci
[ 2.636904] ata3: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd00 irq 28
[ 2.636907] ata4: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd80 irq 28
[ 2.636910] ata5: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe00 irq 28
[ 2.636912] ata6: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe80 irq 28
[ 2.636956] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.636963] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.636974] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.636982] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.637001] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
[ 2.637022] ehci_hcd 0000:00:16.2: debug port 1
[ 2.637039] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe4ff000
[ 2.637047] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.637050] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.637054] ahci 0000:03:00.0: setting latency timer to 64
[ 2.637131] scsi6 : ahci
[ 2.637181] scsi7 : ahci
[ 2.637245] ata7: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18
[ 2.637246] ata8: DUMMY
[ 2.648096] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.648109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.648111] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648113] usb usb3: Product: EHCI Host Controller
[ 2.648114] usb usb3: Manufacturer: Linux 2.6.34-12-default ehci_hcd
[ 2.648115] usb usb3: SerialNumber: 0000:00:16.2
[ 2.648182] hub 3-0:1.0: USB hub found
[ 2.648185] hub 3-0:1.0: 4 ports detected
[ 2.714769] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.714798] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.714808] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.714813] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.714829] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4fe000
[ 2.773054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.773057] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.773058] usb usb4: Product: OHCI Host Controller
[ 2.773060] usb usb4: Manufacturer: Linux 2.6.34-12-default ohci_hcd
[ 2.773061] usb usb4: SerialNumber: 0000:00:12.0
[ 2.773130] hub 4-0:1.0: USB hub found
[ 2.773135] hub 4-0:1.0: 5 ports detected
[ 2.773194] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.773212] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.773281] scsi8 : pata_atiixp
[ 2.773359] scsi9 : pata_atiixp
[ 2.774538] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.774539] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.774617] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.774630] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.774637] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.774652] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fd000
[ 2.788553] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S222L, SB03, max UDMA/66
[ 2.804573] ata1.00: configured for UDMA/66
[ 2.806782] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222L SB03 PQ: 0 ANSI: 5
[ 2.832089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.832091] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.832093] usb usb5: Product: OHCI Host Controller
[ 2.832094] usb usb5: Manufacturer: Linux 2.6.34-12-default ohci_hcd
[ 2.832095] usb usb5: SerialNumber: 0000:00:13.0
[ 2.832155] hub 5-0:1.0: USB hub found
[ 2.832159] hub 5-0:1.0: 5 ports detected
[ 2.832211] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.832222] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.832226] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.832239] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fc000
[ 2.892087] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.892089] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.892091] usb usb6: Product: OHCI Host Controller
[ 2.892092] usb usb6: Manufacturer: Linux 2.6.34-12-default ohci_hcd
[ 2.892093] usb usb6: SerialNumber: 0000:00:14.5
[ 2.892157] hub 6-0:1.0: USB hub found
[ 2.892161] hub 6-0:1.0: 2 ports detected
[ 2.892206] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.892217] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.892222] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.892235] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4f7000
[ 2.949991] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.952045] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.952054] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.952056] usb usb7: Product: OHCI Host Controller
[ 2.952060] usb usb7: Manufacturer: Linux 2.6.34-12-default ohci_hcd
[ 2.952061] usb usb7: SerialNumber: 0000:00:16.0
[ 2.952111] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.952142] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.952145] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.952145] hub 7-0:1.0: USB hub found
[ 2.952152] hub 7-0:1.0: 4 ports detected
[ 3.052771] usb 3-4: new high speed USB device using ehci_hcd and address 2
[ 3.116110] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.117072] ata3.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
[ 3.117074] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.118157] ata3.00: configured for UDMA/133
[ 3.132172] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 3.135312] rtc_cmos 00:03: RTC can wake from S4
[ 3.135352] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.135410] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.138789] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.138822] sd 2:0:0:0: [sda] Write Protect is off
[ 3.138825] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.138843] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.138956] sda: sda1 sda2 sda3 <
[ 3.149801] [drm] Initialized drm 1.1.0 20060810
[ 3.158028] sda5 sda6 sda7 sda8 >
[ 3.184067] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.202363] usb 3-4: New USB device found, idVendor=1737, idProduct=0077
[ 3.202365] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.202367] usb 3-4: Product: 802.11 g WLAN
[ 3.202368] usb 3-4: Manufacturer: Ralink
[ 3.202369] usb 3-4: SerialNumber: 1.0
[ 3.203344] [drm] radeon defaulting to kernel modesetting.
[ 3.203346] [drm] radeon kernel modesetting enabled.
[ 3.203388] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.203391] radeon 0000:01:00.0: setting latency timer to 64
[ 3.204354] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8).
[ 3.204499] [drm] register mmio base: 0xFE5E0000
[ 3.204501] [drm] register mmio size: 131072
[ 3.205649] ATOM BIOS: REDWOOD
[ 3.205663] [drm] Clocks initialized !
[ 3.205664] [drm] 1 Power State(s)
[ 3.205666] [drm] State 0 Default (default)
[ 3.205667] [drm] 16 PCIE Lanes
[ 3.205670] [drm] 1 Clock Mode(s)
[ 3.205671] [drm] 0 engine/memory: 775000/1000000
[ 3.205674] [drm] radeon: power management initialized
[ 3.205681] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 3.205683] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 3.208961] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.208965] [drm] RAM width 128bits DDR
[ 3.209048] [TTM] Zone kernel: Available graphics memory: 436634 kiB.
[ 3.209050] [TTM] Zone highmem: Available graphics memory: 1685182 kiB.
[ 3.209062] [drm] radeon: 256M of VRAM memory ready
[ 3.209063] [drm] radeon: 512M of GTT memory ready.
[ 3.210250] [drm] Radeon Display Connectors
[ 3.210251] [drm] Connector 0:
[ 3.210252] [drm] DisplayPort
[ 3.210253] [drm] HPD4
[ 3.210254] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.210256] [drm] Encoders:
[ 3.210257] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.210257] [drm] Connector 1:
[ 3.210258] [drm] HDMI-A
[ 3.210259] [drm] HPD5
[ 3.210260] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.210261] [drm] Encoders:
[ 3.210262] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.210263] [drm] Connector 2:
[ 3.210264] [drm] DVI-I
[ 3.210265] [drm] HPD1
[ 3.210266] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.210267] [drm] Encoders:
[ 3.210268] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.210269] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.336744] usb 4-5: new low speed USB device using ohci_hcd and address 2
[ 3.423455] [drm] fb mappable at 0xD0040000
[ 3.423457] [drm] vram apper at 0xD0000000
[ 3.423458] [drm] size 8294400
[ 3.423459] [drm] fb depth is 24
[ 3.423459] [drm] pitch is 7680
[ 3.423463] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 3.423478] Console: switching to colour dummy device 80x25
[ 3.454098] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.507116] usb 4-5: New USB device found, idVendor=045e, idProduct=0040
[ 3.507118] usb 4-5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3.507120] usb 4-5: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 3.507121] usb 4-5: Manufacturer: Microsoft
[ 3.511048] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.515686] usbcore: registered new interface driver hiddev
[ 3.519239] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input0
[ 3.519294] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-5/input0
[ 3.519310] usbcore: registered new interface driver usbhid
[ 3.519311] usbhid: USB HID core driver
[ 3.567120] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.623134] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.644747] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 3.657007] Console: switching to colour frame buffer device 236x63
[ 3.678585] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.734618] bootsplash: scaling image from 1400x1050 to 1920x1080
[ 3.768088] fb0: radeondrmfb frame buffer device
[ 3.768089] registered panic notifier
[ 3.768093] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[ 3.802918] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.802921] PM: Basic memory bitmaps created
[ 3.812153] PM: Basic memory bitmaps freed
[ 3.816087] usb 5-1: New USB device found, idVendor=047b, idProduct=0011
[ 3.816089] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.816091] usb 5-1: Product: Standard USB Keyboard
[ 3.816092] usb 5-1: Manufacturer: Silitek
[ 3.825260] input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
[ 3.825309] generic-usb 0003:047B:0011.0002: input,hidraw1: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:13.0-1/input0
[ 3.871348] PM: Starting manual resume from disk
[ 3.871351] PM: Resume from partition 8:5
[ 3.871353] PM: Checking hibernation image.
[ 3.871626] PM: Error -22 checking image file
[ 3.871627] PM: Resume from disk failed.
[ 3.953386] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 5.076370] preloadtrace: systemtap: 1.1/0.147, base: fc773000, memory: 24data/38text/38ctx/13net/301alloc kb, probes: 34
[ 5.848960] udev: starting version 157
[ 5.868514] ACPI: WMI: Mapper loaded
[ 5.870160] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.870180] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 5.870182] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 5.870192] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 5.870298] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe6fe000
[ 5.870326] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 5.870334] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.870335] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.870337] usb usb8: Product: xHCI Host Controller
[ 5.870339] usb usb8: Manufacturer: Linux 2.6.34-12-default xhci_hcd
[ 5.870340] usb usb8: SerialNumber: 0000:02:00.0
[ 5.870833] xHCI xhci_add_endpoint called for root hub
[ 5.870835] xHCI xhci_check_bandwidth called for root hub
[ 5.870860] hub 8-0:1.0: USB hub found
[ 5.870864] hub 8-0:1.0: 4 ports detected
[ 5.871502] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.871530] ACPI: Power Button [PWRB]
[ 5.871566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.871585] ACPI: Power Button [PWRF]
[ 5.914457] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.914480] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.924629] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [??? 0x00000b00-0x00000b2f flags 0x47]
[ 5.924631] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.927040] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.927605] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.929030] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.929046] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.929081] r8169 0000:05:00.0: setting latency timer to 64
[ 5.929087] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[ 5.929134] alloc irq_desc for 29 on node -1
[ 5.929136] alloc kstat_irqs on node -1
[ 5.929149] r8169 0000:05:00.0: irq 29 for MSI/MSI-X
[ 5.929518] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xfcb96000, 48:5b:39:6f:f1:e3, XID 0c100000 IRQ 29
[ 5.935785] ATK0110 ATK0110:00: EC enabled
[ 5.943202] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.946659] rtusb init --->
[ 5.946760] === pAd = fcd11000, size = 471320 ===
[ 5.946762] <-- RTMPAllocAdapterBlock, Status=0
[ 5.947337] usbcore: registered new interface driver rt2870
[ 5.948452] alloc irq_desc for 22 on node -1
[ 5.948456] alloc kstat_irqs on node -1
[ 5.948462] ohci1394 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.956968] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.956971] Uniform CD-ROM driver Revision: 3.20
[ 5.957056] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.007783] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.114730] hda_codec: ALC892: BIOS auto-probing.
[ 6.114734] ALSA hda_codec.c:4358: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
[ 6.114738] ALSA hda_codec.c:4362: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.114740] ALSA hda_codec.c:4366: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.114742] ALSA hda_codec.c:4367: mono: mono_out=0x0
[ 6.114744] ALSA hda_codec.c:4370: dig-out=0x11/0x1e
[ 6.114746] ALSA hda_codec.c:4378: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
[ 6.116642] ALSA patch_realtek.c:1287: realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 6.116644] ALSA patch_realtek.c:1303: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 6.118421] ALSA hda_codec.c:407: Too many connections
[ 6.119604] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.119642] alloc irq_desc for 30 on node -1
[ 6.119643] alloc kstat_irqs on node -1
[ 6.119650] HDA Intel 0000:01:00.1: irq 30 for MSI/MSI-X
[ 6.119668] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.683841] Adding 9488380k swap on /dev/sda5. Priority:-1 extents:1 across:9488380k
[ 6.685154] Adding 3631100k swap on /dev/sda6. Priority:-2 extents:1 across:3631100k
[ 7.288852] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000d7266b]
[ 7.350572] device-mapper: uevent: version 1.0.3
[ 7.350678] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 7.676404] loop: module loaded
[ 7.742169] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 7.769887] fuse init (API version 7.13)
[ 8.982135] type=1505 audit(1284215265.981:2): operation="profile_load" pid=1540 name=/bin/ping
[ 9.011877] type=1505 audit(1284215266.009:3): operation="profile_load" pid=1541 name=/sbin/klogd
[ 9.069810] type=1505 audit(1284215266.069:4): operation="profile_load" pid=1542 name=/sbin/syslog-ng
[ 9.126240] type=1505 audit(1284215266.125:5): operation="profile_load" pid=1543 name=/sbin/syslogd
[ 9.188649] type=1505 audit(1284215266.188:6): operation="profile_load" pid=1544 name=/usr/sbin/avahi-daemon
[ 9.240648] type=1505 audit(1284215266.237:7): operation="profile_load" pid=1545 name=/usr/sbin/identd
[ 9.296682] type=1505 audit(1284215266.296:8): operation="profile_load" pid=1546 name=/usr/sbin/mdnsd
[ 9.362074] type=1505 audit(1284215266.361:9): operation="profile_load" pid=1547 name=/usr/sbin/nscd
[ 9.455493] type=1505 audit(1284215266.452:10): operation="profile_load" pid=1548 name=/usr/sbin/ntpd
[ 9.506072] type=1505 audit(1284215266.505:11): operation="profile_load" pid=1549 name=/usr/sbin/traceroute
[ 9.830411] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.210580] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.228901] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.089626] vboxguest: VirtualBox Guest PCI device not found.
[ 12.169467] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
[ 12.169478] powernow-k8: Core Performance Boosting: on.
[ 12.169519] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 12.169521] powernow-k8: 1 : pstate 1 (2200 MHz)
[ 12.169522] powernow-k8: 2 : pstate 2 (1500 MHz)
[ 12.169524] powernow-k8: 3 : pstate 3 (800 MHz)
[ 13.578539] r8169 0000:05:00.0: eth0: link down
[ 13.578677] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.676820] NET: Registered protocol family 17
[ 20.058163] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 44.457728] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4691.152148] usb 7-3: new full speed USB device using ohci_hcd and address 2
[ 4691.321252] usb 7-3: New USB device found, idVendor=05dc, idProduct=0080
[ 4691.321262] usb 7-3: New USB device strings: Mfr=1, Product=1, SerialNumber=2
[ 4691.321268] usb 7-3: Product: LEXR PLUG DRIVE
[ 4691.321274] usb 7-3: Manufacturer: LEXR PLUG DRIVE
[ 4691.321278] usb 7-3: SerialNumber: 0408130100000536B53D00000000000
[ 4691.362867] Initializing USB Mass Storage driver...
[ 4691.363329] scsi10 : usb-storage 7-3:1.0
[ 4691.363656] usbcore: registered new interface driver usb-storage
[ 4691.363662] USB Mass Storage support registered.
[ 4692.367238] scsi 10:0:0:0: Direct-Access LEXAR DIGITAL FILM /W1. PQ: 0 ANSI: 2
[ 4692.367534] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 4692.377140] sd 10:0:0:0: [sdb] 125952 512-byte logical blocks: (64.4 MB/61.5 MiB)
[ 4692.383212] sd 10:0:0:0: [sdb] Write Protect is off
[ 4692.383214] sd 10:0:0:0: [sdb] Mode Sense: 0d 00 00 00
[ 4692.383217] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4692.413231] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4692.413242] sdb: sdb1
[ 4692.444178] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4692.444188] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[10385.870252] usb 7-3: USB disconnect, address 2
[10493.453275] usb 3-4: USB disconnect, address 2
[10493.453359] rtusb_disconnect: unregister usbnet usb-0000:00:16.2-4
[10493.453366] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=wlan0!
[10493.476487] RTUSB disconnect successfully
[11039.152152] usb 7-4: new full speed USB device using ohci_hcd and address 3
[11039.321263] usb 7-4: New USB device found, idVendor=05dc, idProduct=0080
[11039.321272] usb 7-4: New USB device strings: Mfr=1, Product=1, SerialNumber=2
[11039.321278] usb 7-4: Product: LEXR PLUG DRIVE
[11039.321283] usb 7-4: Manufacturer: LEXR PLUG DRIVE
[11039.321288] usb 7-4: SerialNumber: 0408130100000536B53D00000000000
[11039.325497] scsi11 : usb-storage 7-4:1.0
[11040.331265] scsi 11:0:0:0: Direct-Access LEXAR DIGITAL FILM /W1. PQ: 0 ANSI: 2
[11040.331563] sd 11:0:0:0: Attached scsi generic sg2 type 0
[11040.341198] sd 11:0:0:0: [sdb] 125952 512-byte logical blocks: (64.4 MB/61.5 MiB)
[11040.347261] sd 11:0:0:0: [sdb] Write Protect is off
[11040.347273] sd 11:0:0:0: [sdb] Mode Sense: 0d 00 00 00
[11040.347282] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[11040.377187] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[11040.377201] sdb: sdb1
[11040.408157] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[11040.408166] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[11397.224289] usb 7-4: USB disconnect, address 3
[11404.300193] usb 3-4: new high speed USB device using ehci_hcd and address 6
[11404.450869] usb 3-4: New USB device found, idVendor=1737, idProduct=0077
[11404.450878] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11404.450884] usb 3-4: Product: 802.11 g WLAN
[11404.450889] usb 3-4: Manufacturer: Ralink
[11404.450893] usb 3-4: SerialNumber: 1.0
[11404.452743] === pAd = f8231000, size = 471320 ===
[11404.452749] <-- RTMPAllocAdapterBlock, Status=0
[11493.569845] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[11510.675789] ppdev: user-space parallel port driver
[11510.687870] lp: driver loaded but no devices found
[11510.788866] lp: driver loaded but no devices found
[11512.376920] lp: driver loaded but no devices found
[11618.580850] usb 3-4: firmware: requesting rt3070.bin
[11618.880463] <-- RTMPAllocTxRxRingMemory, Status=0
[11618.882785] -->RTUSBVenderReset
[11618.882904] <--RTUSBVenderReset
[11619.161361] 1. Phy Mode = 0
[11619.161366] 2. Phy Mode = 0
[11619.161373] NVM is Efuse and its size =2d[2d0-2fc]
[11619.217853] RTMPSetPhyMode: channel is out of range, use first channel=1
[11619.232719] 3. Phy Mode = 0
[11619.237598] MCS Set = 00 00 00 00 00
[11619.299832] <==== rt28xx_init, Status=0
[11619.301454] 0x1300 = 00073200
[11629.572085] wlan0: no IPv6 routers present
[11657.650037] lp: driver loaded but no devices found
[11657.754223] lp: driver loaded but no devices found
[11659.230459] lp: driver loaded but no devices found
[12128.202000] r8169 0000:05:00.0: eth0: link down
[12128.202144] ADDRCONF(NETDEV_UP): eth0: link is not ready
[12420.631998] r8169 0000:05:00.0: eth0: link down
[12420.632146] ADDRCONF(NETDEV_UP): eth0: link is not ready
[12625.736809] martian source 255.255.255.255 from 172.26.0.1, on dev wlan0
[12625.736829] ll header: ff:ff:ff:ff:ff:ff:00:19:56:b3:68:c3:08:00
[12901.742049] r8169 0000:05:00.0: eth0: link down
[12901.742192] ADDRCONF(NETDEV_UP): eth0: link is not ready
[13783.523786] lp: driver loaded but no devices found
[13783.626163] lp: driver loaded but no devices found
[13785.130614] lp: driver loaded but no devices found
[15314.088448] usb 7-3: new full speed USB device using ohci_hcd and address 4
[15314.257179] usb 7-3: New USB device found, idVendor=05dc, idProduct=0080
[15314.257188] usb 7-3: New USB device strings: Mfr=1, Product=1, SerialNumber=2
[15314.257195] usb 7-3: Product: LEXR PLUG DRIVE
[15314.257200] usb 7-3: Manufacturer: LEXR PLUG DRIVE
[15314.257205] usb 7-3: SerialNumber: 0408130100000536B53D00000000000
[15314.261443] scsi12 : usb-storage 7-3:1.0
[15315.267212] scsi 12:0:0:0: Direct-Access LEXAR DIGITAL FILM /W1. PQ: 0 ANSI: 2
[15315.267524] sd 12:0:0:0: Attached scsi generic sg2 type 0
[15315.277139] sd 12:0:0:0: [sdb] 125952 512-byte logical blocks: (64.4 MB/61.5 MiB)
[15315.283170] sd 12:0:0:0: [sdb] Write Protect is off
[15315.283180] sd 12:0:0:0: [sdb] Mode Sense: 0d 00 00 00
[15315.283187] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[15315.313216] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[15315.313226] sdb: sdb1
[15315.343161] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[15315.343164] sd 12:0:0:0: [sdb] Attached SCSI removable disk
lspci results
lsmodCode:00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603]
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4) [1022:9608]
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609]
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390]
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8410]
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
Kernel driver in use: pcieport
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Redwood [Radeon HD 5670] [1002:68d8]
Subsystem: PC Partner Limited Device [174b:e152]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series] [1002:aa60]
Subsystem: PC Partner Limited Device [174b:aa60]
Kernel driver in use: HDA Intel
02:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8413]
Kernel driver in use: xhci_hcd
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Kernel driver in use: pata_jmicron
04:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Kernel driver in use: ohci1394
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Kernel driver in use: r8169
Hope that is is what you need. Thanks for the reply.Code:Module Size Used by
lp 8050 0
parport_pc 32995 0
ppdev 8412 0
parport 33558 3 lp,parport_pc,ppdev
st 35784 0
joydev 9327 0
nls_iso8859_1 3313 1
nls_cp437 4983 1
vfat 10159 1
fat 52460 1 vfat
usb_storage 42555 1
ip6t_LOG 5182 6
xt_tcpudp 2107 2
xt_pkttype 912 3
ipt_LOG 5119 6
xt_limit 1673 12
vmsync 3186 0
vmblock 11363 1
snd_pcm_oss 47311 0
snd_mixer_oss 16449 1 snd_pcm_oss
snd_seq 57073 0
snd_seq_device 6534 1 snd_seq
edd 8720 0
af_packet 19192 2
cpufreq_conservative 10064 0
cpufreq_userspace 2583 0
cpufreq_powersave 914 0
powernow_k8 18453 1
mperf 1255 1 powernow_k8
ip6t_REJECT 4311 3
nf_conntrack_ipv6 18193 4
ip6table_raw 1187 1
xt_NOTRACK 816 4
ipt_REJECT 2152 3
xt_state 1162 8
iptable_raw 1246 1
iptable_filter 1418 1
ip6table_mangle 1588 0
nf_conntrack_netbios_ns 1318 0
nf_conntrack_ipv4 8691 4
nf_conntrack 73886 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 1201 1 nf_conntrack_ipv4
ip_tables 12172 2 iptable_raw,iptable_filter
ip6table_filter 1359 1
ip6_tables 13476 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 16414 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables
fuse 65514 7
loop 14417 0
dm_mod 72676 0
snd_hda_codec_atihdmi 2559 1
snd_hda_codec_realtek 235364 1
firewire_ohci 23401 0
firewire_core 52007 1 firewire_ohci
crc_itu_t 1435 1 firewire_core
sr_mod 14351 0
ohci1394 29812 0
rt2870sta 436230 1
crc_ccitt 1403 1 rt2870sta
serio_raw 4330 0
ieee1394 87766 1 ohci1394
asus_atk0110 16111 0
r8169 38431 0
pcspkr 1614 0
snd_hda_intel 24598 2
i2c_piix4 11350 0
snd_hda_codec 98144 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
k10temp 2723 0
snd_hwdep 5990 1 snd_hda_codec
sg 27412 0
cdrom 37760 1 sr_mod
snd_pcm 86832 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 21318 2 snd_seq,snd_pcm
button 5417 0
xhci_hcd 81372 0
wmi 7467 0
snd 64702 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 7013 1 snd
snd_page_alloc 7817 2 snd_hda_intel,snd_pcm
ext4 360485 2
jbd2 78872 1 ext4
crc16 1403 1 ext4
usbhid 44717 0
hid 68594 1 usbhid
radeon 792465 2
ttm 55288 1 radeon
drm_kms_helper 29179 1 radeon
drm 176922 4 radeon,ttm,drm_kms_helper
sd_mod 36723 9
ata_generic 2711 0
rtc_cmos 10902 0
pata_atiixp 3564 0
ohci_hcd 32005 0
i2c_algo_bit 5572 1 radeon
rtc_core 17621 1 rtc_cmos
rtc_lib 2441 1 rtc_core
pata_jmicron 1971 0
ahci 36734 6
libata 185684 4 ata_generic,pata_atiixp,pata_jmicron,ahci
ehci_hcd 51733 0
usbcore 192259 7 usb_storage,rt2870sta,xhci_hcd,usbhid,ohci_hcd,ehci_hcd
scsi_mod 159241 6 st,usb_storage,sr_mod,sg,sd_mod,libata
i2c_core 26632 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
fan 3539 0
thermal 17293 0
processor 40311 7 powernow_k8
thermal_sys 14735 3 fan,thermal,processor
hwmon 2060 3 asus_atk0110,k10temp,thermal_sys
I'm not the wireless pro on these boards... but it looks good so far!:)
One thing was missing, though.
Open a terminal, and execute these two commands:
Post back the results.Code:ifconfig -a
iwconfig
Okay here are the results. I'm also thinking my wireless is OK, but after searching around, I could not find how to actually use the card to search for networks or to connect. Sorry again, I'm incredibly new at Linux.Quote:
Originally Posted by jayd512
ifconfig -a
iwconfigCode:eth0 Link encap:Ethernet HWaddr 48:5B:39:6F:F1:E3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:29 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:130 errors:0 dropped:0 overruns:0 frame:0
TX packets:130 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9784 (9.5 Kb) TX bytes:9784 (9.5 Kb)
wlan0 Link encap:Ethernet HWaddr 00:23:69:E1:B8:64
inet6 addr: fe80::223:69ff:fee1:b864/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:253832 errors:0 dropped:0 overruns:0 frame:0
TX packets:908 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:32524946 (31.0 Mb) TX bytes:44932 (43.8 Kb)
Code:
lo no wireless extensions
eth0 no wireless extensions
wlan0 Ralink STA ESSID:"USI Wireless" Nickname:"RT2870STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0D:67:09:8F:4F
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=92/100 Signal level:-49 dBm Noise level:-83 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Great! Your wireless is detected! And ready to go!:D
Are you running either GNOME or KDE? If so, you should have Network Manager in the top right corner of your desktop (or KNetwork).
You should be able to configure your wireless connection from there.
Give it a go.
So long as you know the Network name and whatever encryption key is needed, you should be good to go.
Thanks! Got it working which means no more manual installing!
Just for the sake of those looking at this thread, can you tell us what happened to make it work?
I went to Yast > Network Settings
Under Network Setup Method, I check User Controlled with NetworkManager
That seemed to do the trick.
Outstanding!
Glad you got it going!:D