I installed the tftp server on the Linux PC and configured the IP of the PC as 192.168.0.1
and the IP of ethernet card on the IXDP425 board 192.168.0.2
I put zImage file in the /tftpboot directory and config the /etc/xinetd.d/tftp file.

Can anybody give me any hint? Thanks a lot!

################################################## #######
RedBoot> fconfig -i
Initialize non-volatile configuration - continue (y/n)? y
Run script at boot: false
Use BOOTP for network configuration: false

Gateway IP address:
Local IP address: 192.168.0.2
Local IP address mask: 255.255.255.0
Default server IP address:
192.168.0.1
Console baud rate: 115200
DNS server IP address:
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Default network device: i82559_eth0

Update RedBoot non-volatile configuration - continue (y/n)? y
... Unlock from 0x50fc0000-0x50fc1000: .
... Erase from 0x50fc0000-0x50fc1000: .
... Program from 0x0ffd2000-0x0ffd3000 at 0x50fc0000: .
... Lock from 0x50fc0000-0x50fc1000: .

RedBoot> reset
... Resetting.
+Ethernet eth0: MAC address 00:0e:0c:00:e0:34
IP: 192.168.0.2/255.255.255.0, Gateway: 0.0.0.0
Default server:
192.168.0.1, DNS server IP: 0.0.0.0


RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92 - built 23:01:46, May 2 2003


Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.


RAM: 0x00000000-0x10000000, 0x0001f880-0x0ffd1000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot> ip_address
IP:
192.168.0.2/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.0.1, DNS server IP: 0.0.0.0


RedBoot> load -r -v -b 0x01600000 zImage
Using default protocol (TFTP)
__udp_sendto: Can't find address of server
Can't load 'zImage': some sort of network error



RedBoot> ping -h 192.168.0.2
Network PING - from 192.168.0.2 to 192.168.0.2
PING - received 0 of 10 expected


RedBoot>ping -h 192.168.0.1
PING: Cannot reach server '192.168.0.1' (192.168.0.1)


################################################## ################