Change Permissions on slave drive

[bryansmith]

My guess is this is your problem:

/dev/hdb1 /mnt/win_c ntfs-3g defaults,umask=0 0 0## fstab created
by Livecd-install

The 'by Livecd-install' part is on a separate line and thus, read like an entry. Either delete it or put in on the previous line .

Bryan

[SkittleLinux18]

My guess is this is your problem:

/dev/hdb1 /mnt/win_c ntfs-3g defaults,umask=0 0 0## fstab created
by Livecd-install

The 'by Livecd-install' part is on a separate line and thus, read like an entry. Either delete it or put in on the previous line .

Bryan

Hey Bryan, nice to meet you! You were right about your comment, but I had already corrected that. However, your comment forced me to look at something else that DID solve the problem!

I never unmounted my slave drive. Since Devil's Casper was adamant that the mount -a code was correct, and Bryan, you were forcing me to double check that line in my fstab, I came across the idea that I never unmounted the drive. So this is what I did after I took both of your advice:

umount /dev/hdb1
mount /mnt/win_c

I now have read and write privileges. Everything is working perfectly! Thank you, both!

[bryansmith]

Nice to meet you too!

Your welcome for indirectly helping you. It's amazing how often the little things prove to be the solution.

Bryan

[devils casper]

There is no need to unmount partition because mount - a command do that itself. It remounts all mounted partitions. Problem was in /etc/fstab file only.

[SkittleLinux18]

There is no need to unmount partition because mount - a command do that itself. It remounts all mounted partitions. Problem was in /etc/fstab file only.

I agree. So the only thing I can think of that was causing the command not to work would be the LiveCD line in the file. I probably should have commented it (inserting a # before it) or deleted it completely. Because I was executing the command in root. Oh well, I still give the credit for this fix to you guys. Thank you!

Kev

[SkittleLinux18]

Alright, so this problem isn't solved after all. My original slave drive that was in my pclos computer had to come out. I transfered everything to my main drive. I put a new slave drive in and had to reformat it. Using PartedMagic, I formatted it as JournalisedFS ext3 with mount point /mount/windows. Tried working my fstab according, but to no avail.

fdisk -l gives this:

[root@localhost kevpclos]# fdisk -l

Disk /dev/hda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hda1 * 1 1019 8185086 83 Linux
/dev/hda2 1020 24321 187173315 5 Extended
/dev/hda5 1020 1528 4088511 82 Linux swap / Solaris
/dev/hda6 1529 24321 183084741 83 Linux

Disk /dev/hdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hdb1 * 1 19457 156288321 83 Linux

fstab contains this:

# /dev/hda1, size=16370172, type=131: Journalised FS: ext3 (primary)
/dev/hda1 / ext3 defaults 1 1
none /dev/pts devpts mode=0620 0 0
# /dev/hda6, size=366169482, type=131: Journalised FS: ext3 (extended)
/dev/hda6 /home ext3 defaults 1 2
/dev/hdc /mnt/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# /dev/hdb1, size=, type=131: Journalised FS: ext3 (extended)
/dev/hdb1 /mnt/windows ext3 defaults,umask=0 1 2
none /proc proc defaults 0 0
none /proc/bus/usb usbfs defaults 0 0
# /dev/hda5, size=8177022, type=130: Linux swap (extended)
/dev/hda5 swap swap defaults 0 0

dmesg gives this:

[root@localhost kevpclos]# dmesg
Linux version 2.6.22.15.tex2 (root@localhost) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-4pclos2007)) #1 SMP Mon Dec 17 23:18:44 CST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data)
BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
639MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb930
Entering add_active_range(0, 0, 393200) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 393200
early_node_map[1] active PFN ranges
0: 0 -> 393200
On node 0 totalpages: 393200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1279 pages used for memmap
HighMem zone: 162545 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000FA970, 0014 (r0 AMI )
ACPI: RSDT 5FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97)
ACPI: FACP 5FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97)
ACPI: DSDT 5FFF0120, 36AC (r1 VIA VIA_K7 1000 MSFT 100000D)
ACPI: FACS 5FFF8000, 0040
ACPI: APIC 5FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists. Total pages: 390129
Kernel command line: BOOT_IMAGE=linux root=/dev/hda1 acpi=on resume=/dev/hda5 splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1305.909 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1553984k/1572800k available (2204k kernel code, 17096k reserved, 730k data, 292k init, 655296k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03e4000 - 0xc042d000 ( 292 kB)
.data : 0xc03273db - 0xc03ddc84 ( 730 kB)
.text : 0xc0100000 - 0xc03273db (2204 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2613.50 BogoMIPS (lpj=1306750)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 241k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) XP 1700+ stepping 00
Total of 1 processors activated (2613.50 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dbe00000-dfefffff
PREFETCH window: bbd00000-dbcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1210028886.156:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Bypassing VIA 8237 APIC De-Assert Message
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total 262144k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d600
vesafb: pmi: set display start = c00cd636, set palette = c00cd6a0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 10804 bytes,<6>...found (800x600, 10756 bytes, v3).
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
VP_IDE: chipset revision 6
VP_IDE: not 100&#37; native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD2000JB-00REA0, ATA DISK drive
hdb: ST3160815A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdb: max request size: 512KiB
hdb: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 312581808 sectors (160041 MB)
hdb: Host Protected Area disabled.
hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 292k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 17, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 17, io mem 0xdfffbe00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 471512
ext3_orphan_cleanup: deleting unreferenced inode 471483
ext3_orphan_cleanup: deleting unreferenced inode 471466
ext3_orphan_cleanup: deleting unreferenced inode 471449
ext3_orphan_cleanup: deleting unreferenced inode 471605
ext3_orphan_cleanup: deleting unreferenced inode 471473
ext3_orphan_cleanup: deleting unreferenced inode 471464
ext3_orphan_cleanup: deleting unreferenced inode 471472
ext3_orphan_cleanup: deleting unreferenced inode 471462
ext3_orphan_cleanup: deleting unreferenced inode 471604
ext3_orphan_cleanup: deleting unreferenced inode 471461
ext3_orphan_cleanup: deleting unreferenced inode 471601
ext3_orphan_cleanup: deleting unreferenced inode 471598
ext3_orphan_cleanup: deleting unreferenced inode 471597
ext3_orphan_cleanup: deleting unreferenced inode 471595
ext3_orphan_cleanup: deleting unreferenced inode 471593
ext3_orphan_cleanup: deleting unreferenced inode 471588
EXT3-fs: hda1: 17 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Capability LSM initialized
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
SCSI subsystem initialized
libata version 2.21 loaded.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
sata_via 0000:00:0f.0: version 2.2
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e802 bmdma 0x0001dc00 irq 16
ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e002 bmdma 0x0001dc08 irq 16
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3 FS on hda1, internal journal
Adding 4088500k swap on /dev/hda5. Priority:-1 extents:1 across:4088500k
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
loop: module loaded
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 10804 bytes,<6>...found (800x600, 10756 bytes, v3).
bootsplash: status on console 0 changed to on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
Removing netfilter NETLINK layer.
No dock devices found.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
NET: Registered protocol family 17
rt61 1.1.0 CVS 2007102018 http://rt2x00.serialmonkey.com
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
RT61: RfIcType= 3
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 5 changed to on