probe

Hi,

I found this information about mounting iso file in Linux:

Create the directory i.e. mount point:
# mkdir -p /mnt/disk

3) Use mount command as follows to mount iso file called disk1.iso:
# mount -o loop disk1.iso /mnt/disk

4) Change directory to list files stored inside an ISO image:
# cd /mnt/disk
# ls -l

But when I type

mount -o loop disk1.iso /mnt/disk

nothing happens, I just get information about mount command.

Thanks

bigtomrodney

That sounds like your syntax is bad. From looking at it you should at least specify what filesystem type you're using.The -t switch is specifying that it is an iso9660 filesystem, i.e. CD/DVD.

__________________
Registered Linux user #378740
New members read here / Forum Rules
#linuxforums on irc.freenode.net

Rubberman

I do this for mounting iso images without problems. However, you must either be root or sudo the mount since mount is a privileged command. Ie,
if you are not root. If you are root, then executing mount without sudo should be just fine. As bigtomrodney said, you might need the type information, but on my RHEL/CentOS system you don't.

__________________
Sometimes, real fast is almost as good as real time.