Error when using make

[tonywolfe121]

Whenever I use make I get this error any help?

Make Warning: File 'Makefile' has modification time 1.2e+08 s in the future
make -C driver
make[1]: Entering dir '/Home/Anthony/Documents/ndiswrapper/driver'
makefile:34: *** Cannot fink kernel version in /usr/src/kerrnels/2.6.2.75-117.fcl0x86_64 is not configured?. Stop.
make[1]Leavind directioy '/Home/Anthony/Documents/ndiswrapper/driver'
make *** [all] Error 2


Thanks in advance

[waterhead]

You need to install the kernel source. Just look at what the error is telling you.

I see that you are trying to compile NDISwrapper. I encourage you to first try the native Linux drivers. Read through this stickied post, and provide the info that it tells how to find.

http://www.linuxforums.org/forum/wir...tart-here.html

[tonywolfe121]

I don't think there are linksys drivers for linux but thanks lets see if i can find the kernel source

[waterhead]

And I think that you may be wrong. But we will never know if you don't at least try, and post the info needed to find out.

[tonywolfe121]

Ok. just let me get the info

Oh and after you get the kernel source you just dumo the folders in the dir it is whining about right?

[tonywolfe121]

Info
dmesg

 Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.5-117.fc10.x86_64 (mockbuild@x86-1.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:58:53 EST 2008
Command line: ro root=UUID=0e15b0b2-92a3-48e2-9205-9328ad44af8a rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
 BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
 BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
last_pfn = 0x3bef0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
 0000000000 - 003be00000 page 2M
 003be00000 - 003bef0000 page 4k
kernel direct mapping tables up to 3bef0000 @ 8000-b000
last_map_addr: 3bef0000 end: 3bef0000
RAMDISK: 37b2f000 - 37fefa27
DMI 2.4 present.
ACPI: RSDP 000F8840, 0014 (r0 HP-CPC)
ACPI: RSDT 3BEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3BEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3BEF31C0, 3A8F (r1 HP-CPC AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3BEF0000, 0040
ACPI: SSDT 3BEF6D80, 00D6 (r1 HP-CPC POWERNOW        1  LTP        1)
ACPI: SRAT 3BEF6EC0, 0090 (r1 HP-CPC HAMMER          1 AMD         1)
ACPI: MCFG 3BEF6FC0, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3BEF6CC0, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-40000000
NUMA: Allocated memnodemap from 9000 - 9880
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003bef0000
  NODE_DATA [0000000000009880 - 000000000001e87f]
  bootmap [000000000001f000 -  00000000000267df] pages 8
(7 early reservations) ==> bootmem [0000000000 - 003bef0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000a2b20c]    TEXT DATA BSS ==> [0000200000 - 0000a2b20c]
  #3 [0037b2f000 - 0037fefa27]          RAMDISK ==> [0037b2f000 - 0037fefa27]
  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #5 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
  #6 [0000009000 - 0000009880]       MEMNODEMAP ==> [0000009000 - 0000009880]
found SMP MP-table at [ffff8800000f4920] 000f4920
 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0003bef0
On node 0 totalpages: 245391
  DMA zone: 1750 pages, LIFO batch:0
  DMA32 zone: 238091 pages, LIFO batch:31
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
PERCPU: Allocating 65184 bytes of per cpu data
NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 239841
Policy zone: DMA32
Kernel command line: ro root=UUID=0e15b0b2-92a3-48e2-9205-9328ad44af8a rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1989.786 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2f1a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 953588k/981952k available (3300k kernel code, 27976k reserved, 1838k data, 1288k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.57 BogoMIPS (lpj=1989786)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU 0/0 -> Node 0
tseg: 003bf00000
SMP alternatives: switching to UP code
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
Using local APIC timer interrupts.
APIC timer calibration result 12436180
Detected 12.436 MHz APIC timer.
Brought up 1 CPUs
Total of 1 processors activated (3979.57 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5904 bytes
CPU0 attaching sched-domain:
 domain 0: span 0 level CPU
  groups: 0
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
Time:  1:53:45  Date: 03/13/05
NET: Registered protocol family 16
No dock devices found.
node 0 link 0: io port [d000, ffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e02fffff]
bus: [00,02] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [40000000, efffffff]
bus: 00 index 3 mmio: [f0000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 18 io port: [4100, 411f]
PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff]
PCI: 0000:00:12.0 reg 10 io port: [fe00, fe07]
PCI: 0000:00:12.0 reg 14 io port: [fd00, fd03]
PCI: 0000:00:12.0 reg 18 io port: [fc00, fc07]
PCI: 0000:00:12.0 reg 1c io port: [fb00, fb03]
PCI: 0000:00:12.0 reg 20 io port: [fa00, fa0f]
PCI: 0000:00:12.0 reg 24 32bit mmio: [fe02f000, fe02f1ff]
PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 7ffff]
pci 0000:00:12.0: supports D1
pci 0000:00:12.0: supports D2
PCI: 0000:00:13.0 reg 10 32bit mmio: [fe02e000, fe02efff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [fe02d000, fe02dfff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [fe02c000, fe02cfff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [400, 40f]
PCI: 0000:00:14.0 reg 14 32bit mmio: [fe02b000, fe02b3ff]
HPET not enabled in BIOS. You might try hpet=force boot option
PCI: 0000:00:14.1 reg 10 io port: [0, 7]
PCI: 0000:00:14.1 reg 14 io port: [0, 3]
PCI: 0000:00:14.1 reg 18 io port: [0, 7]
PCI: 0000:00:14.1 reg 1c io port: [0, 3]
PCI: 0000:00:14.1 reg 20 io port: [f800, f80f]
PCI: 0000:00:14.5 reg 10 32bit mmio: [fe02a000, fe02a0ff]
PCI: 0000:01:05.0 reg 10 32bit mmio: [d8000000, dfffffff]
PCI: 0000:01:05.0 reg 14 io port: [ef00, efff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [fddf0000, fddfffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [e000, efff]
PCI: bridge 0000:00:01.0 32bit mmio: [fdd00000, fddfffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d8000000, dfffffff]
PCI: 0000:02:01.0 reg 10 32bit mmio: [fdcff000, fdcff0ff]
PCI: 0000:02:01.0 reg 14 io port: [df00, df07]
PCI: 0000:02:01.0 reg 18 io port: [de00, deff]
pci 0000:02:01.0: supports D2
pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
PCI: 0000:02:03.0 reg 10 io port: [dd00, ddff]
PCI: 0000:02:03.0 reg 14 32bit mmio: [fdcfe000, fdcfe0ff]
PCI: 0000:02:03.0 reg 30 32bit mmio: [0, ffff]
pci 0000:02:03.0: supports D1
pci 0000:02:03.0: supports D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
PCI: 0000:02:04.0 reg 10 32bit mmio: [fdcfd000, fdcfd7ff]
PCI: 0000:02:04.0 reg 14 io port: [dc00, dc7f]
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [d000, dfff]
PCI: bridge 0000:00:14.4 32bit mmio: [fdc00000, fdcfffff]
PCI: bridge 0000:00:14.4 32bit mmio pref: [fde00000, fdefffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x40b-0x40b) overlaps 0000:00:14.0 BAR 0 (0x400-0x40f), disabling
pnp 00:0a: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0b: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0b: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0b: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0b: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
tracer: 1286 pages allocated for 65536 entries of 80 bytes
   actual entries 65586
ACPI: RTC can wake from S4
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:0b: iomem range 0xd0000-0xd3fff has been reserved
system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0x3bf00000-0x3bffffff has been reserved
system 00:0b: iomem range 0x3bef0000-0x3befffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x3beeffff could not be reserved
system 00:0b: iomem range 0x3c000000-0x3fffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4:   IO window: 0xd000-0xdfff
pci 0000:00:14.4:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:14.4:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [e000, efff]
bus: 01 index 1 mmio: [fdd00000, fddfffff]
bus: 01 index 2 mmio: [d8000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [fdc00000, fdcfffff]
bus: 02 index 2 mmio: [fde00000, fdefffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 4866k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1110678825.440:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1871
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:05.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
USB Universal Host Controller Interface driver v3.0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=0b38, idProduct=0003
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB-compliant keyboard
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
usb 3-4: new full speed USB device using ohci_hcd and address 3
usb 3-4: configuration #1 chosen from 1 choice
usb 3-4: New USB device found, idVendor=058f, idProduct=9360
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB Reader
usb 3-4: Manufacturer:  
usb 3-4: SerialNumber: 2004888
usbcore: registered new interface driver hiddev
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5
input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.1-1
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input6
input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.1-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (7680 buckets, 30720 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
  Magic number: 13:398:862
Freeing unused kernel memory: 1288k freed
Write protecting the kernel read-only data: 4744k
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] Detected VRAM RAM=65536K, accessible=65536K, BAR=131072K
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
allocated ffff8800378ea000 800x600 fb: 0x00040000, bo ffff880038e9b680
Console: switching to colour frame buffer device 100x37
[drm] DAC-6: set mode 800x600 7
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Loading R300 Microcode
[drm] Num pipes: 2
[drm] writeback test succeeded in 1 usecs
[drm] Initialized radeon 1.29.0 20080528 on minor 0
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata1.00: ATA-6: ST3160021A, 8.11, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST GCE-8400B, 1.06, max MWDMA2
ata2.01: ATAPI: Memorex DVD-ROM 16X v2, GWS2, max UDMA/33
ata2.00: configured for MWDMA2
ata2.01: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     ATA      ST3160021A       8.11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8400B  1.06 PQ: 0 ANSI: 5
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
         cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: link is slow to respond, please be patient (ready=0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2.01: configured for UDMA/33
ata2: EH complete
ata2.00: limiting speed to MWDMA1:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
         cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: link is slow to respond, please be patient (ready=0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: soft resetting link
ata2.00: configured for MWDMA1
ata2.01: configured for UDMA/33
ata2: EH complete
ata2.00: limiting speed to PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
         cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: link is slow to respond, please be patient (ready=0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: soft resetting link
ata2.00: configured for PIO4
ata2.01: configured for UDMA/33
ata2: EH complete
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: CD-ROM            Memorex  DVD-ROM 16X v2   GWS2 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sr 1:0:1:0: Attached scsi generic sg2 type 5
pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 7987272
EXT3-fs: dm-0: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1110678969.506:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 109081 rules.
SELinux: 8192 avtab hash slots, 109081 rules.
SELinux:  8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats
SELinux:  73 classes, 109081 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1110678969.851:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sata_sil 0000:00:12.0: version 2.3
scsi2 : sata_sil
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ata4: SATA link down (SStatus 0 SControl 300)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xffffc200001f8000, 00:13:d3:59:3f:2a, IRQ 20
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
input: PC Speaker as /devices/platform/pcspkr/input/input7
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
firewire_ohci 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
firewire_core: created device fw0: GUID 0010dc0000b97317, S400
ppdev: user-space parallel port driver
device-mapper: multipath: version 1.0.5 loaded
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg4 type 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg6 type 0
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1966072k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1966072k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev proc, type proc), uses genfs_contexts
Not cloning cgroup for unused subsystem ns
Clocksource tsc unstable (delta = -229444957 ns)
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
mtrr: base(0xd86ff000) is not aligned on a size(0x271000) boundary
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
[drm:edid_is_valid] *ERROR* EDID has minor version 0, which is not between 0-3
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 52 4c 11 10 75 37 00 00  ........RL..u7..
<3>11 0a 01 00 28 1c 15 32 e8 c6 4e 9f 57 4f 97 26  ....(..2..N.WO.&
<3>10 47 4f ff f8 61 31 59 45 59 01 01 01 01 01 01  .GO..a1YEY......
<3>01 01 01 01 01 01 56 13 20 00 31 58 19 20 10 50  ......V. .1X. .P
<3>13 00 18 d2 10 00 00 1e 4e 0c 80 c8 20 e0 14 10  ........N... ...
<3>10 40 13 00 18 d2 10 00 00 1c f9 15 20 f8 30 58  .@.......... .0X
<3>1f 20 20 40 13 00 18 d2 10 00 00 1c 10 0e 80 c0  .  @............
<3>20 e0 1d 10 38 38 13 00 18 d2 10 00 00 1e 00 13   ...88..........

pci 0000:01:05.0: VGA-1: EDID invalid.
virbr0: no IPv6 routers present
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux:  Context system_u:object_r:user_gnome_home_t:s0 is not valid (left unmapped).
SELinux:  Context unconfined_u:object_r:user_gnome_home_t:s0 is not valid (left unmapped).
usb 1-6: new high speed USB device using ehci_hcd and address 6
usb 1-6: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb 1-6: New USB device found, idVendor=054c, idProduct=0243
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Storage Media
usb 1-6: Manufacturer: Sony
usb 1-6: SerialNumber: 2A08030582312
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sd 5:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-6: USB disconnect, address 6
usb 1-6: new high speed USB device using ehci_hcd and address 7
usb 1-6: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb 1-6: New USB device found, idVendor=054c, idProduct=0243
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Storage Media
usb 1-6: Manufacturer: Sony
usb 1-6: SerialNumber: 2A08030582312
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdf] Assuming drive cache: write through
sd 6:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 6:0:0:0: [sdf] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-6: USB disconnect, address 7
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 489
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 490
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 491
lost page write due to I/O error on sdf1
usb 1-6: new high speed USB device using ehci_hcd and address 8
usb 1-6: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb 1-6: New USB device found, idVendor=054c, idProduct=0243
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Storage Media
usb 1-6: Manufacturer: Sony
usb 1-6: SerialNumber: 2A08030582312
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdf] Assuming drive cache: write through
sd 7:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 7:0:0:0: [sdf] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-6: USB disconnect, address 8
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 491
lost page write due to I/O error on sdf1
usb 1-6: new high speed USB device using ehci_hcd and address 9
usb 1-6: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb 1-6: New USB device found, idVendor=054c, idProduct=0243
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Storage Media
usb 1-6: Manufacturer: Sony
usb 1-6: SerialNumber: 2A08030582312
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sd 8:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 8:0:0:0: [sdf] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-6: USB disconnect, address 9
usb 1-6: new high speed USB device using ehci_hcd and address 10
usb 1-6: configuration #1 chosen from 1 choice
usb 1-6: New USB device found, idVendor=13b1, idProduct=000d
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: Wireless-G USB Network Adapter
usb 1-6: Manufacturer: Cisco-Linksys
phy0: Selected rate control algorithm 'pid'
Registered led device: rt2500usb-phy0:radio
usbcore: registered new interface driver rt2500usb
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1c:df:ac:3b:65
wlan0: authenticated
wlan0: associate with AP 00:1c:df:ac:3b:65
wlan0: RX AssocResp from 00:1c:df:ac:3b:65 (capab=0x1 status=0 aid=4)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociating by local choice (reason=3)
wlan0: no IPv6 routers present
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 9:0:0:0: [sdf] Write Protect is off
sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdf] Assuming drive cache: write through
sd 9:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 9:0:0:0: [sdf] Write Protect is off
sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 9:0:0:0: [sdf] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 11
Buffer I/O error on device sdf1, logical block 9
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 249
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 489
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 490
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 491
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 492
lost page write due to I/O error on sdf1
usb 1-5: new high speed USB device using ehci_hcd and address 12
usb 1-5: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdf] Assuming drive cache: write through
sd 10:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 12
Buffer I/O error on device sdf1, logical block 489
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 490
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 491
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 492
lost page write due to I/O error on sdf1
usb 1-5: new high speed USB device using ehci_hcd and address 13
usb 1-5: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 13
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 11:0:0:0: [sdf] Assuming drive cache: write through
sd 11:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 11:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 11:0:0:0: [sdf] Attached SCSI removable disk
sd 11:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 13
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 492
lost page write due to I/O error on sdf1
usb 1-5: new high speed USB device using ehci_hcd and address 14
usb 1-5: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 14
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 12:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 12:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 12:0:0:0: [sdf] Write Protect is off
sd 12:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 12:0:0:0: [sdf] Assuming drive cache: write through
sd 12:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 12:0:0:0: [sdf] Write Protect is off
sd 12:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 12:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 12:0:0:0: [sdf] Attached SCSI removable disk
sd 12:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 14
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 492
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 493
lost page write due to I/O error on sdf1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts
usb 1-5: new high speed USB device using ehci_hcd and address 15
usb 1-5: configuration #1 chosen from 1 choice
scsi13 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 15
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 13:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 13:0:0:0: [sdf] Write Protect is off
sd 13:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 13:0:0:0: [sdf] Assuming drive cache: write through
sd 13:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 13:0:0:0: [sdf] Write Protect is off
sd 13:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 13:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 13:0:0:0: [sdf] Attached SCSI removable disk
sd 13:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 15
usb 1-5: new high speed USB device using ehci_hcd and address 16
usb 1-5: configuration #1 chosen from 1 choice
scsi14 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 14:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 14:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 14:0:0:0: [sdf] Write Protect is off
sd 14:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 14:0:0:0: [sdf] Assuming drive cache: write through
sd 14:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 14:0:0:0: [sdf] Write Protect is off
sd 14:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 14:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 14:0:0:0: [sdf] Attached SCSI removable disk
sd 14:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
usb 1-5: USB disconnect, address 16
Buffer I/O error on device sdf1, logical block 9
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 249
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 488
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 489
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 490
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 491
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 492
lost page write due to I/O error on sdf1
Buffer I/O error on device sdf1, logical block 493
lost page write due to I/O error on sdf1
usb 1-5: new high speed USB device using ehci_hcd and address 17
usb 1-5: configuration #1 chosen from 1 choice
scsi15 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=054c, idProduct=0243
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Storage Media
usb 1-5: Manufacturer: Sony
usb 1-5: SerialNumber: 2A08030582312
usb-storage: device found at 17
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 15:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
sd 15:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 15:0:0:0: [sdf] Write Protect is off
sd 15:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 15:0:0:0: [sdf] Assuming drive cache: write through
sd 15:0:0:0: [sdf] 3932160 512-byte hardware sectors (2013 MB)
sd 15:0:0:0: [sdf] Write Protect is off
sd 15:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 15:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 15:0:0:0: [sdf] Attached SCSI removable disk
sd 15:0:0:0: Attached scsi generic sg7 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts

[waterhead]

Thanks for the info, it will take me a few minutes to digest it.

You should install the kernel source using YUM. This does require an internet connection. Install the kernel headers too.

yum install kernel-devel kernel-headers

[tonywolfe121]

lol there is yum again...

I do not have the Internet on fedora. I do not have anything but a linksys to connect to the Internet.

[waterhead]

OK, this is the wireless:

Bus 001 Device 010: ID 13b1:000d Linksys WUSB54G Wireless Adapter

No big surprise there. It is loading these modules for it:

Module                  Size  Used by
rt2500usb              28672  0 
rt2x00usb              17792  1 rt2500usb
rt2x00lib              43648  2 rt2500usb,rt2x00usb
rfkill                 17316  1 rt2x00lib
mac80211              213872  2 rt2x00usb,rt2x00lib
cfg80211               32400  2 rt2x00lib,mac80211

Actually, it should already be working. Have you clicked on the NetworkManager icon (next to the Date/Time) and try to connect to a wireless network? You could also post the output of these commands.

ifconfig
iwconfig

[tonywolfe121]

Wow that was easy.

Im sorry if i wasted your time.