I have installed a few third party repos:

centos.karan
rpmforge
atrpms

When I run #yum update they are being recognized but at the end it is saying that 791 packages were excluded due to priorties restrictions.

Here are my repos:
Code:
[atrpms]
name=Fedora Core $releasever - $basearch - ATrpms
baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable
gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms
gpgcheck=1
priority=2
enable=1
priority=20

# CentOS-Base.repo
#
# This file uses a new mirrorlist system developed by Lance Davis for CentOS.
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1

#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1

#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever - Addons
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
#baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=2

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=2
# CentOS-Media.repo
#
# This repo is used to mount the default locations for a CDROM / DVD on
#  CentOS-5.  You can use this repo and yum to install items directly off the
#  DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
#  yum --enablerepo=c5-media [command]
#
# or for ONLY the media repo, do this:
#
#  yum --disablerepo=\* --enablerepo=c5-media [command]

[c5-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/
        file:///media/cdrom/
        file:///media/cdrecorder/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
# All new packages are now released to the testing repository first
# and only moved into Stable after a period of time
# Note: The testing repository is disabled by default

[kbs-CentOS-Extras]
name=CentOS.Karan.Org-EL$releasever - Stable
gpgcheck=1
gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
enabled=1
baseurl=http://centos.karan.org/el$releasever/extras/stable/$basearch/RPMS/
priority=15

[kbs-CentOS-Testing]
name=CentOS.Karan.Org-EL$releasever - Testing
gpgcheck=1
gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
enabled=0
baseurl=http://centos.karan.org/el$releasever/extras/testing/$basearch/RPMS/
priority=15
[kbs-CentOS-Misc]
name=CentOS.Karan.Org-EL$releasever - Stable
gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
gpgcheck=1
enabled=1
baseurl=http://centos.karan.org/el$releasever/misc/stable/$basearch/RPMS/
# Need a ftp mirror ? Uncomment the line below and comment the line above
# baseurl=ftp://rpm.karan.org/pub/kbsingh/el$releasever/misc/stable/$basearch/RPMS/
priority=15

[kbs-CentOS-Misc-Testing]
name=CentOS.Karan.Org-EL$releasever - Testing
gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
gpgcheck=1
enabled=0
baseurl=http://centos.karan.org/el$releasever/misc/testing/i386/RPMS/
# Ned a ftp mirror ? Uncomment the line below and comment the line above
# baseurl=ftp://rpm.karan.org/pub/kbsingh/el$releasever/misc/testing/$basearch/RPMS/
priority=15
http://apt.sw.be/redhat/el5/en/$ARCH/dag
http://archive.cs.uu.nl/mirror/dag.wieers/redhat/el5/en/$ARCH/dag
http://ftp2.lcpe.uni-sofia.bg/freshrpms/pub/dag/redhat/el5/en/$ARCH/dag
#http://ftp.heanet.ie/pub/freshrpms/pub/dag/redhat/el5/en/$ARCH/dag
http://ftp-stud.fht-esslingen.de/dag/redhat/el5/en/$ARCH/dag
http://mirror.cpsc.ucalgary.ca/mirror/dag/redhat/el5/en/$ARCH/dag
http://mirrors.ircam.fr/pub/dag/redhat/el5/en/$ARCH/dag
http://rh-mirror.linux.iastate.edu/pub/dag/redhat/el5/en/$ARCH/dag
http://rpmfind.net/linux/dag/redhat/el5/en/$ARCH/dag
http://wftp.tu-chemnitz.de/pub/linux/dag/redhat/el5/en/$ARCH/dag
http://www.mirrorservice.org/sites/apt.sw.be/redhat/el5/en/$ARCH/dag
# Name: RPMforge RPM Repository for Red Hat Enterprise 5 - dag
# URL: http://rpmforge.net/
[rpmforge]
name = Red Hat Enterprise $releasever - RPMforge.net - dag
#baseurl = http://apt.sw.be/redhat/el5/en/$basearch/dag
mirrorlist = http://apt.sw.be/redhat/el5/en/mirrors-rpmforge
#mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge
enabled = 1
protect = 0
gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
gpgcheck = 1
priority = 10
I know this can't be working right because when I run # yum install php it wants to install version 5.1.6 instead of the newest version.

How do I fix this?